powerpc: B4860QDS: Remove macro CONFIG_B4860QDS

Use CONFIG_TARGET_B4860QDS instead.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/cmd_errata.c

@@ -323,7 +323,8 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (IS_SVR_REV(svr, 1, 0))
 		puts("Work-around for Erratum A-008044 enabled\n");
 #endif
-#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && defined(CONFIG_B4860QDS)
+#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && \
+	(defined(CONFIG_TARGET_B4860QDS) || defined(CONFIG_TARGET_B4420QDS))
 	puts("Work-around for Erratum XFI on B4860QDS enabled\n");
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A009663

arch/powerpc/include/asm/fsl_secure_boot.h

@@ -25,7 +25,8 @@
 #endif
 #define CONFIG_SYS_PBI_FLASH_WINDOW		0xcff80000
 
-#if defined(CONFIG_B4860QDS) || \
+#if defined(CONFIG_TARGET_B4860QDS) || \
+	defined(CONFIG_TARGET_B4420QDS) || \
 	defined(CONFIG_T4240QDS) || \
 	defined(CONFIG_T2080QDS) || \
 	defined(CONFIG_T2080RDB) || \
@@ -134,7 +135,7 @@
 /* The bootscript header address is different for B4860 because the NOR
  * mapping is different on B4 due to reduced NOR size.
  */
-#if defined(CONFIG_B4860QDS)
+#if defined(CONFIG_TARGET_B4860QDS) || defined(CONFIG_TARGET_B4420QDS)
 #define CONFIG_BOOTSCRIPT_HDR_ADDR	0xecc00000
 #elif defined(CONFIG_FSL_CORENET)
 #define CONFIG_BOOTSCRIPT_HDR_ADDR	0xe8e00000

board/freescale/b4860qds/Makefile

@@ -8,7 +8,8 @@ ifdef CONFIG_SPL_BUILD
 obj-y	+= spl.o
 else
 obj-y	+= b4860qds.o
-obj-$(CONFIG_B4860QDS)	+= eth_b4860qds.o
+obj-$(CONFIG_TARGET_B4860QDS)	+= eth_b4860qds.o
+obj-$(CONFIG_TARGET_B4420QDS)	+= eth_b4860qds.o
 obj-$(CONFIG_PCI)	+= pci.o
 endif
 

drivers/net/fm/b4860.c

@@ -47,7 +47,7 @@ void fman_enable_port(enum fm_port port)
 
 phy_interface_t fman_port_enet_if(enum fm_port port)
 {
-#if defined(CONFIG_B4860QDS)
+#if defined(CONFIG_TARGET_B4860QDS) || defined(CONFIG_TARGET_B4420QDS)
 	u32 serdes2_prtcl;
 	char buffer[HWCONFIG_BUFFER_SIZE];
 	char *buf = NULL;
@@ -60,7 +60,8 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	/*B4860 has two 10Gig Mac*/
 	if ((port == FM1_10GEC1 || port == FM1_10GEC2)	&&
 	    ((is_serdes_configured(XAUI_FM1_MAC9))	||
-	     #if !defined(CONFIG_B4860QDS)
+	     #if (!defined(CONFIG_TARGET_B4860QDS) && \
+		  !defined(CONFIG_TARGET_B4R420QDS))
 	     (is_serdes_configured(XFI_FM1_MAC9))	||
 	     (is_serdes_configured(XFI_FM1_MAC10))	||
 	     #endif
@@ -68,7 +69,7 @@ phy_interface_t fman_port_enet_if(enum fm_port port)
 	     ))
 		return PHY_INTERFACE_MODE_XGMII;
 
-#if defined(CONFIG_B4860QDS)
+#if defined(CONFIG_TARGET_B4860QDS) || defined(CONFIG_TARGET_B4420QDS)
 	serdes2_prtcl = in_be32(&gur->rcwsr[4]) &
 			FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
 

include/configs/B4860QDS.h

@@ -10,8 +10,6 @@
 /*
  * B4860 QDS board configuration file
  */
-#define CONFIG_B4860QDS
-
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI	$(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
 #define CONFIG_SYS_FSL_PBL_RCW	$(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg

scripts/config_whitelist.txt

@@ -291,7 +291,6 @@ CONFIG_AUTOCALIB
 CONFIG_AUTONEG_TIMEOUT
 CONFIG_AUTO_COMPLETE
 CONFIG_AUTO_ZRELADDR
-CONFIG_B4860QDS
 CONFIG_BACKSIDE_L2_CACHE
 CONFIG_BAMBOO
 CONFIG_BAMBOO_NAND