drivers/phy: Add Marvell SerDes / PHY drivers used on Armada 7K/8K

This version is based on the Marvell U-Boot version with this patch
applied as latest patch:

Git ID 7f408573: "fix: comphy: cp110: add comphy initialization for usb
device mode" from 2016-07-05.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>

drivers/phy/marvell/Makefile

@@ -5,3 +5,4 @@
 obj-$(CONFIG_MVEBU_COMPHY_SUPPORT) += comphy_core.o
 obj-$(CONFIG_MVEBU_COMPHY_SUPPORT) += comphy_mux.o
 obj-$(CONFIG_ARMADA_3700) += comphy_a3700.o
+obj-$(CONFIG_ARMADA_8K) += comphy_cp110.o

drivers/phy/marvell/comphy.h

@@ -60,6 +60,9 @@
 #define COMMON_PHY_SD_CTRL1_RXAUI0_MASK		\
 	(0x1 << COMMON_PHY_SD_CTRL1_RXAUI0_OFFSET)
 
+/* ToDo: Get this address via DT */
+#define MVEBU_CP0_REGS_BASE			0xF2000000UL
+
 #define DFX_DEV_GEN_CTRL12			(MVEBU_CP0_REGS_BASE + 0x400280)
 #define DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET		7
 #define DFX_DEV_GEN_PCIE_CLK_SRC_MASK		\
@@ -117,10 +120,21 @@ static inline int comphy_a3700_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 	return -1;
 }
 #endif
-int comphy_ap806_init(struct chip_serdes_phy_config *ptr_chip_cfg,
-		      struct comphy_map *serdes_map);
+
+#ifdef CONFIG_ARMADA_8K
 int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
 		      struct comphy_map *serdes_map);
+#else
+static inline int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg,
+		      struct comphy_map *serdes_map)
+{
+	/*
+	 * This function should never be called in this configuration, so
+	 * lets return an error here.
+	 */
+	return -1;
+}
+#endif
 
 void comphy_dedicated_phys_init(void);
 

drivers/phy/marvell/comphy_core.c

@@ -139,6 +139,9 @@ static int comphy_probe(struct udevice *dev)
 	if (of_device_is_compatible(dev, "marvell,comphy-armada-3700"))
 		chip_cfg->ptr_comphy_chip_init = comphy_a3700_init;
 
+	if (of_device_is_compatible(dev, "marvell,comphy-cp110"))
+		chip_cfg->ptr_comphy_chip_init = comphy_cp110_init;
+
 	/*
 	 * Bail out if no chip_init function is defined, e.g. no
 	 * compatible node is found

drivers/phy/marvell/comphy_hpipe.h

@@ -78,6 +78,14 @@
 #define HPIPE_KVCO_CALIB_CTRL_MAX_PLL_MASK	\
 	(0x1 << HPIPE_KVCO_CALIB_CTRL_MAX_PLL_OFFSET)
 
+#define HPIPE_CAL_REG1_REG			0xc
+#define HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET	10
+#define HPIPE_CAL_REG_1_EXT_TXIMP_MASK		\
+	(0x1f << HPIPE_CAL_REG_1_EXT_TXIMP_OFFSET)
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET	15
+#define HPIPE_CAL_REG_1_EXT_TXIMP_EN_MASK	\
+	(0x1 << HPIPE_CAL_REG_1_EXT_TXIMP_EN_OFFSET)
+
 #define HPIPE_SQUELCH_FFE_SETTING_REG           0x018
 
 #define HPIPE_DFE_REG0				0x01C
@@ -94,6 +102,9 @@
 	(0x1 << HPIPE_DFE_F3_F5_DFE_CTRL_OFFSET)
 
 #define HPIPE_G1_SET_0_REG			0x034
+#define HPIPE_G1_SET_0_G1_TX_AMP_OFFSET		1
+#define HPIPE_G1_SET_0_G1_TX_AMP_MASK		\
+	(0x1f << HPIPE_G1_SET_0_G1_TX_AMP_OFFSET)
 #define HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET	7
 #define HPIPE_G1_SET_0_G1_TX_EMPH1_MASK		\
 	(0xf << HPIPE_G1_SET_0_G1_TX_EMPH1_OFFSET)
@@ -145,6 +156,14 @@
 #define HPIPE_ISOLATE_MODE_GEN_TX_MASK		\
 	(0xf << HPIPE_ISOLATE_MODE_GEN_TX_OFFSET)
 
+#define HPIPE_G1_SET_2_REG			0xf4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET	0
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_MASK		\
+	(0xf << HPIPE_G1_SET_2_G1_TX_EMPH0_OFFSET)
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_OFFSET	4
+#define HPIPE_G1_SET_2_G1_TX_EMPH0_EN_MASK	\
+	(0x1 << HPIPE_G1_SET_2_G1_TX_EMPH0_MASK)
+
 #define HPIPE_VTHIMPCAL_CTRL_REG                0x104
 
 #define HPIPE_PCIE_REG0                         0x120
@@ -164,6 +183,9 @@
 #define HPIPE_MISC_CLK100M_125M_OFFSET		4
 #define HPIPE_MISC_CLK100M_125M_MASK		\
 	(0x1 << HPIPE_MISC_CLK100M_125M_OFFSET)
+#define HPIPE_MISC_ICP_FORCE_OFFSET		5
+#define HPIPE_MISC_ICP_FORCE_MASK		\
+	(0x1 << HPIPE_MISC_ICP_FORCE_OFFSET)
 #define HPIPE_MISC_TXDCLK_2X_OFFSET		6
 #define HPIPE_MISC_TXDCLK_2X_MASK		\
 	(0x1 << HPIPE_MISC_TXDCLK_2X_OFFSET)
@@ -197,6 +219,14 @@
 #define HPIPE_SMAPLER_MASK			\
 	(0x1 << HPIPE_SMAPLER_OFFSET)
 
+#define HPIPE_TX_REG1_REG			0x174
+#define HPIPE_TX_REG1_TX_EMPH_RES_OFFSET	5
+#define HPIPE_TX_REG1_TX_EMPH_RES_MASK		\
+	(0x3 << HPIPE_TX_REG1_TX_EMPH_RES_OFFSET)
+#define HPIPE_TX_REG1_SLC_EN_OFFSET		10
+#define HPIPE_TX_REG1_SLC_EN_MASK		\
+	(0x3f << HPIPE_TX_REG1_SLC_EN_OFFSET)
+
 #define HPIPE_PWR_CTR_DTL_REG			0x184
 #define HPIPE_PWR_CTR_DTL_FLOOP_EN_OFFSET	2
 #define HPIPE_PWR_CTR_DTL_FLOOP_EN_MASK		\
@@ -262,6 +292,9 @@
 	(0x1 << HPIPE_TX_SWEEP_PRESET_EN_OFFSET)
 
 #define HPIPE_G1_SETTINGS_3_REG			0x440
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET	9
+#define HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_MASK	\
+	(0x1 << HPIPE_G1_SETTINGS_3_G1_FBCK_SEL_OFFSET)
 
 #define HPIPE_G1_SETTINGS_4_REG			0x444
 #define HPIPE_G1_SETTINGS_4_G1_DFE_RES_OFFSET	8
@@ -289,6 +322,11 @@
 #define HPIPE_DFE_CTRL_28_PIPE4_MASK		\
 	(0x1 << HPIPE_DFE_CTRL_28_PIPE4_OFFSET)
 
+#define HPIPE_G1_SETTING_5_REG			0x538
+#define HPIPE_G1_SETTING_5_G1_ICP_OFFSET	0
+#define HPIPE_G1_SETTING_5_G1_ICP_MASK		\
+	(0xf << HPIPE_G1_SETTING_5_G1_ICP_OFFSET)
+
 #define HPIPE_LANE_CONFIG0_REG			0x600
 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_OFFSET	0
 #define HPIPE_LANE_CONFIG0_TXDEEMPH0_MASK	\

drivers/phy/marvell/sata.h

+/*
+ * Copyright (C) 2015-2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SATA_H_
+#define _SATA_H_
+
+/* SATA3 Unit address */
+#define SATA3_VENDOR_ADDRESS		0xA0
+#define SATA3_VENDOR_ADDR_OFSSET	0
+#define SATA3_VENDOR_ADDR_MASK		(0xFFFFFFFF << SATA3_VENDOR_ADDR_OFSSET)
+#define SATA3_VENDOR_DATA		0xA4
+
+#define SATA_CONTROL_REG		0x0
+#define SATA3_CTRL_SATA0_PD_OFFSET	6
+#define SATA3_CTRL_SATA0_PD_MASK	(1 << SATA3_CTRL_SATA0_PD_OFFSET)
+#define SATA3_CTRL_SATA1_PD_OFFSET	14
+#define SATA3_CTRL_SATA1_PD_MASK	(1 << SATA3_CTRL_SATA1_PD_OFFSET)
+#define SATA3_CTRL_SATA1_ENABLE_OFFSET	22
+#define SATA3_CTRL_SATA1_ENABLE_MASK	(1 << SATA3_CTRL_SATA1_ENABLE_OFFSET)
+#define SATA3_CTRL_SATA_SSU_OFFSET	23
+#define SATA3_CTRL_SATA_SSU_MASK	(1 << SATA3_CTRL_SATA_SSU_OFFSET)
+
+#define SATA_MBUS_SIZE_SELECT_REG	0x4
+#define SATA_MBUS_REGRET_EN_OFFSET	7
+#define SATA_MBUS_REGRET_EN_MASK	(0x1 << SATA_MBUS_REGRET_EN_OFFSET)
+
+#endif /* _SATA_H_ */

drivers/phy/marvell/utmi_phy.h

+/*
+ * Copyright (C) 2015-2016 Marvell International Ltd.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _UTMI_PHY_H_
+#define _UTMI_PHY_H_
+
+#define UTMI_USB_CFG_DEVICE_EN_OFFSET		0
+#define UTMI_USB_CFG_DEVICE_EN_MASK		\
+	(0x1 << UTMI_USB_CFG_DEVICE_EN_OFFSET)
+#define UTMI_USB_CFG_DEVICE_MUX_OFFSET		1
+#define UTMI_USB_CFG_DEVICE_MUX_MASK		\
+	(0x1 << UTMI_USB_CFG_DEVICE_MUX_OFFSET)
+#define UTMI_USB_CFG_PLL_OFFSET			25
+#define UTMI_USB_CFG_PLL_MASK			\
+	(0x1 << UTMI_USB_CFG_PLL_OFFSET)
+
+#define UTMI_PHY_CFG_PU_OFFSET			5
+#define UTMI_PHY_CFG_PU_MASK			\
+	(0x1 << UTMI_PHY_CFG_PU_OFFSET)
+
+#define UTMI_PLL_CTRL_REG			0x0
+#define UTMI_PLL_CTRL_REFDIV_OFFSET		0
+#define UTMI_PLL_CTRL_REFDIV_MASK		\
+	(0x7f << UTMI_PLL_CTRL_REFDIV_OFFSET)
+#define UTMI_PLL_CTRL_FBDIV_OFFSET		16
+#define UTMI_PLL_CTRL_FBDIV_MASK		\
+	(0x1FF << UTMI_PLL_CTRL_FBDIV_OFFSET)
+#define UTMI_PLL_CTRL_SEL_LPFR_OFFSET		28
+#define UTMI_PLL_CTRL_SEL_LPFR_MASK		\
+	(0x3 << UTMI_PLL_CTRL_SEL_LPFR_OFFSET)
+#define UTMI_PLL_CTRL_PLL_RDY_OFFSET		31
+#define UTMI_PLL_CTRL_PLL_RDY_MASK		\
+	(0x1 << UTMI_PLL_CTRL_PLL_RDY_OFFSET)
+
+#define UTMI_CALIB_CTRL_REG			0x8
+#define UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET	8
+#define UTMI_CALIB_CTRL_IMPCAL_VTH_MASK		\
+	(0x7 << UTMI_CALIB_CTRL_IMPCAL_VTH_OFFSET)
+#define UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET	23
+#define UTMI_CALIB_CTRL_IMPCAL_DONE_MASK	\
+	(0x1 << UTMI_CALIB_CTRL_IMPCAL_DONE_OFFSET)
+#define UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET	31
+#define UTMI_CALIB_CTRL_PLLCAL_DONE_MASK	\
+	(0x1 << UTMI_CALIB_CTRL_PLLCAL_DONE_OFFSET)
+
+#define UTMI_TX_CH_CTRL_REG			0xC
+#define UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET	12
+#define UTMI_TX_CH_CTRL_DRV_EN_LS_MASK		\
+	(0xf << UTMI_TX_CH_CTRL_DRV_EN_LS_OFFSET)
+#define UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET	16
+#define UTMI_TX_CH_CTRL_IMP_SEL_LS_MASK		\
+	(0xf << UTMI_TX_CH_CTRL_IMP_SEL_LS_OFFSET)
+
+#define UTMI_RX_CH_CTRL0_REG			0x14
+#define UTMI_RX_CH_CTRL0_SQ_DET_OFFSET		15
+#define UTMI_RX_CH_CTRL0_SQ_DET_MASK		\
+	(0x1 << UTMI_RX_CH_CTRL0_SQ_DET_OFFSET)
+#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET	28
+#define UTMI_RX_CH_CTRL0_SQ_ANA_DTC_MASK	\
+	(0x1 << UTMI_RX_CH_CTRL0_SQ_ANA_DTC_OFFSET)
+
+#define UTMI_RX_CH_CTRL1_REG			0x18
+#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET	0
+#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_MASK	\
+	(0x3 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_OFFSET)
+#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET	3
+#define UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_MASK	\
+	(0x1 << UTMI_RX_CH_CTRL1_SQ_AMP_CAL_EN_OFFSET)
+
+#define UTMI_CTRL_STATUS0_REG			0x24
+#define UTMI_CTRL_STATUS0_SUSPENDM_OFFSET	22
+#define UTMI_CTRL_STATUS0_SUSPENDM_MASK		\
+	(0x1 << UTMI_CTRL_STATUS0_SUSPENDM_OFFSET)
+#define UTMI_CTRL_STATUS0_TEST_SEL_OFFSET	25
+#define UTMI_CTRL_STATUS0_TEST_SEL_MASK		\
+	(0x1 << UTMI_CTRL_STATUS0_TEST_SEL_OFFSET)
+
+#define UTMI_CHGDTC_CTRL_REG			0x38
+#define UTMI_CHGDTC_CTRL_VDAT_OFFSET		8
+#define UTMI_CHGDTC_CTRL_VDAT_MASK		\
+	(0x3 << UTMI_CHGDTC_CTRL_VDAT_OFFSET)
+#define UTMI_CHGDTC_CTRL_VSRC_OFFSET		10
+#define UTMI_CHGDTC_CTRL_VSRC_MASK		\
+	(0x3 << UTMI_CHGDTC_CTRL_VSRC_OFFSET)
+
+#endif /* _UTMI_PHY_H_ */
+