configs: Resync with savedefconfig

Signed-off-by: Tom Rini <trini@konsulko.com>

configs/A20-OLinuXino_MICRO_defconfig

@@ -14,6 +14,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPB(8)"
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_USB_EHCI_HCD=y

configs/A20-Olimex-SOM-EVB_defconfig

@@ -17,6 +17,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
 # CONFIG_CMD_FPGA is not set
 CONFIG_RTL8211X_PHY_FORCE_MASTER=y
 CONFIG_ETH_DESIGNWARE=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_AXP_ALDO3_VOLT=2800
 CONFIG_AXP_ALDO4_VOLT=2800
+CONFIG_USB_EHCI_HCD=y

configs/A33-OLinuXino_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I_A33=y
-
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=15291
 CONFIG_DRAM_ODT_EN=y
-
 CONFIG_MMC0_CD_PIN="PB4"
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
-CONFIG_AXP_GPIO=y
 CONFIG_USB0_ID_DET="PB3"
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_AXP_GPIO=y
+CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_BL_EN="PB2"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-olinuxino"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-
-CONFIG_VIDEO=y
-# CONFIG_VIDEO_VGA_VIA_LCD is not set
-CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_DCLK_PHASE=0
-CONFIG_VIDEO_LCD_POWER=""
-CONFIG_VIDEO_LCD_RESET=""
-CONFIG_VIDEO_LCD_BL_EN="PB2"
-CONFIG_VIDEO_LCD_BL_PWM="PH0"
-CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=y
-
 CONFIG_AXP_DCDC1_VOLT=3300
+CONFIG_USB_MUSB_HOST=y

configs/B4860QDS_SECURE_BOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_B4860QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_NAND_DDRCLK100_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_NAND_DDRCLK133_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_NOR_DDRCLK100_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_NOR_DDRCLK133_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_SDCARD_DDRCLK100_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_SDCARD_DDRCLK133_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/BSC9132QDS_SPIFLASH_DDRCLK133_SECURE_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_BSC9132QDS=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/C29XPCIE_NOR_SECBOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_C29XPCIE=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/CHIP_defconfig

@@ -13,10 +13,10 @@ CONFIG_CMD_DFU=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_AXP_ALDO3_VOLT=3300
 CONFIG_AXP_ALDO4_VOLT=3300
+CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_MUSB_GADGET=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
 CONFIG_G_DNL_VENDOR_NUM=0x1f3a
 CONFIG_G_DNL_PRODUCT_NUM=0x1010
-CONFIG_USB_EHCI_HCD=y

configs/Cubietruck_plus_defconfig

@@ -4,7 +4,6 @@ CONFIG_MACH_SUN8I_A83T=y
 CONFIG_DRAM_CLK=672
 CONFIG_DRAM_ZQ=15355
 CONFIG_DRAM_ODT_EN=y
-CONFIG_MMC0_CD_PIN="PF6"
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
 CONFIG_USB0_ID_DET="PH11"

configs/Merrii_A80_Optimus_defconfig

@@ -5,7 +5,6 @@ CONFIG_DRAM_CLK=360
 CONFIG_DRAM_ZQ=123
 CONFIG_SYS_CLK_FREQ=1008000000
 CONFIG_MMC0_CD_PIN="PH18"
-# CONFIG_VIDEO is not set
 CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-optimus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 # CONFIG_CMD_IMLS is not set

configs/P1010RDB-PA_NAND_SECBOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/P1010RDB-PA_NOR_SECBOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y

configs/P1010RDB-PA_SPIFLASH_SECBOOT_defconfig

 CONFIG_PPC=y
-# CONFIG_SYS_MALLOC_F is not set
 CONFIG_MPC85xx=y
 CONFIG_TARGET_P1010RDB=y
+# CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y