ARM: relocation: fix typo in comment

Signed-off-by: Heiko Schocher <hs@denx.de>

include/configs/imx27lite-common.h

@@ -235,7 +235,7 @@
 	"mtdids=" MTDIDS_DEFAULT "\0"					\
 	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \

include/configs/km_arm.h

@@ -180,7 +180,7 @@ int get_scl (void);
 #undef	CONFIG_JFFS2_CMDLINE
 #endif
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_INIT_SP_ADDR		(0x00000000 + 0x1000 - /* Fix this */ \
 					CONFIG_SYS_GBL_DATA_SIZE)

include/configs/omap3_beagle.h

@@ -340,7 +340,7 @@ extern unsigned int boot_flash_sec;
 extern unsigned int boot_flash_type;
 #endif
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)

include/configs/qong.h

@@ -282,7 +282,7 @@ extern int qong_nand_rdy(void *chip);
 	"mtdparts=physmap-flash.0:384k(U-Boot),128k(env1),"	\
 	"128k(env2),2432k(kernel),13m(ramdisk),-(user)"
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		0x80000000
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR

include/configs/tx25.h

@@ -176,7 +176,7 @@
 	"update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0"	\
 	"upd=run load update\0"						\
 
-/* additions for new relocation code, must added to all boards */
+/* additions for new relocation code, must be added to all boards */
 #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \