include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.

Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
used to be included but CONFIG_BOOTP_MASK was not defined.

Remove lingering references to CFG_CMD_* symbols.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

include/configs/PATI.h

@@ -40,6 +40,15 @@
 #define CONFIG_BAUDRATE		9600
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PCI405.h

@@ -69,6 +69,15 @@
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PCI5441.h

@@ -123,6 +123,15 @@
 #define	CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PIP405.h

@@ -41,6 +41,15 @@
 #define CONFIG_SYS_CLK_FREQ	33000000 /* external frequency to pll	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PK1C20.h

@@ -161,6 +161,15 @@
 #define CONFIG_SERVERIP		192.168.2.16
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PLU405.h

@@ -62,6 +62,15 @@
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PM520.h

@@ -89,6 +89,15 @@
 #endif
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PM854.h

@@ -304,6 +304,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PM856.h

@@ -307,6 +307,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PMC405.h

@@ -64,6 +64,15 @@
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PN62.h

@@ -42,6 +42,15 @@
 #define CONFIG_CONS_INDEX	1
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/PPChameleonEVB.h

@@ -114,6 +114,15 @@
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/RPXsuper.h

@@ -150,6 +150,15 @@
 #define CFG_PROMPT              "=> "
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/Rattler.h

@@ -126,6 +126,15 @@
 #define CONFIG_BAUDRATE		38400
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
@@ -207,7 +216,7 @@
 #define MTDIDS_DEFAULT		"nor0=rattler-0"
 #define MTDPARTS_DEFAULT	"mtdparts=rattler-0:-@1m(jffs2)"
 */
-#endif /* CFG_CMD_JFFS2 */
+#endif /* CONFIG_CMD_JFFS2 */
 
 #define CFG_MONITOR_BASE	TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)

include/configs/SBC8540.h

@@ -339,6 +339,15 @@
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/SL8245.h

@@ -54,6 +54,15 @@
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/SX1.h

@@ -94,6 +94,15 @@
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/SXNI855T.h

@@ -147,6 +147,15 @@
 #define CFG_DISCOVER_PHY
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/Sandpoint8240.h

@@ -81,6 +81,15 @@
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */

include/configs/Sandpoint8245.h

@@ -52,6 +52,15 @@
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
 
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */