powerpc: T1040D4RDB: Separate from T1040RDB in Kconfig

Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace
CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros.

Signed-off-by: York Sun <york.sun@nxp.com>

arch/powerpc/cpu/mpc85xx/Kconfig

@@ -218,6 +218,12 @@ config TARGET_T1040RDB
 	select SUPPORT_SPL
 	select PHYS_64BIT
 
+config TARGET_T1040D4RDB
+	bool "Support T1040D4RDB"
+	select ARCH_T1040
+	select SUPPORT_SPL
+	select PHYS_64BIT
+
 config TARGET_T1042RDB
 	bool "Support T1042RDB"
 	select SUPPORT_SPL

board/freescale/t104xrdb/Kconfig

-if TARGET_T1040RDB || TARGET_T1042RDB
+if TARGET_T1040RDB || TARGET_T1040D4RDB || TARGET_T1042RDB
 
 config SYS_BOARD
 	default "t104xrdb"

board/freescale/t104xrdb/eth.c

@@ -43,7 +43,7 @@ int board_eth_init(bd_t *bis)
 		int idx = i - FM1_DTSEC1;
 
 		switch (fm_info_get_enet_if(i)) {
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 		case PHY_INTERFACE_MODE_SGMII:
 			/* T1040RDB & T1040D4RDB only supports SGMII on
 			 * DTSEC3

board/freescale/t104xrdb/t104xrdb.c

@@ -105,7 +105,7 @@ int misc_init_r(void)
 		CPLD_WRITE(misc_ctl_status, CPLD_READ(misc_ctl_status) |
 					 MISC_CTL_SG_SEL | MISC_CTL_AURORA_SEL);
 
-#if defined(CONFIG_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040D4RDB)
 	if (hwconfig("qe-tdm")) {
 		CPLD_WRITE(sfp_ctl_status, CPLD_READ(sfp_ctl_status) |
 			   MISC_MUX_QE_TDM);

configs/T1040D4RDB_NAND_defconfig

@@ -7,12 +7,12 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
+CONFIG_TARGET_T1040D4RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,NAND,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SDCARD_defconfig

@@ -7,12 +7,12 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
+CONFIG_TARGET_T1040D4RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SDCARD,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SECURE_BOOT_defconfig

 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
+CONFIG_TARGET_T1040D4RDB=y
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
+CONFIG_SYS_EXTRA_OPTIONS="T104XD4RDB,SYS_FSL_DDR4,SECURE_BOOT"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_SPIFLASH_defconfig

@@ -8,12 +8,12 @@ CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
+CONFIG_TARGET_T1040D4RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH,T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

configs/T1040D4RDB_defconfig

 CONFIG_PPC=y
 CONFIG_MPC85xx=y
-CONFIG_TARGET_T1040RDB=y
+CONFIG_TARGET_T1040D4RDB=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="T1040D4RDB,T104XD4RDB,SYS_FSL_DDR4"
+CONFIG_SYS_EXTRA_OPTIONS="T104XD4RDB,SYS_FSL_DDR4"
 CONFIG_BOOTDELAY=10
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y

include/configs/T104xRDB.h

@@ -68,7 +68,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_nand_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042_nand_rcw.cfg
 #endif
-#ifdef CONFIG_T1040D4RDB
+#ifdef CONFIG_TARGET_T1040D4RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_nand_rcw.cfg
 #endif
@@ -102,7 +102,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_spi_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042_spi_rcw.cfg
 #endif
-#ifdef CONFIG_T1040D4RDB
+#ifdef CONFIG_TARGET_T1040D4RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_spi_rcw.cfg
 #endif
@@ -136,7 +136,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_sd_rcw.cfg
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1042_sd_rcw.cfg
 #endif
-#ifdef CONFIG_T1040D4RDB
+#ifdef CONFIG_TARGET_T1040D4RDB
 #define CONFIG_SYS_FSL_PBL_RCW \
 $(SRCTREE)/board/freescale/t104xrdb/t1040d4_sd_rcw.cfg
 #endif
@@ -348,7 +348,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define CPLD_DIU_SEL_DFP		0xc0
 #endif
 
-#if defined(CONFIG_T1040D4RDB)
+#if defined(CONFIG_TARGET_T1040D4RDB)
 #define CPLD_INT_MASK_ALL		0xFF
 #define CPLD_INT_MASK_THERM		0x80
 #define CPLD_INT_MASK_DVI_DFP		0x40
@@ -760,7 +760,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #ifdef CONFIG_FMAN_ENET
 #if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
-#elif defined(CONFIG_T1040D4RDB)
+#elif defined(CONFIG_TARGET_T1040D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x01
 #elif defined(CONFIG_T1042D4RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x02
@@ -777,7 +777,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #endif
 
 /* Enable VSC9953 L2 Switch driver on T1040 SoC */
-#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1040D4RDB)
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_TARGET_T1040D4RDB)
 #define CONFIG_VSC9953
 #define CONFIG_CMD_ETHSW
 #ifdef CONFIG_T1040RDB
@@ -887,7 +887,7 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg
 #define FDTFILE		"t1042rdb_pi/t1042rdb_pi.dtb"
 #elif defined(CONFIG_T1042RDB)
 #define FDTFILE		"t1042rdb/t1042rdb.dtb"
-#elif defined(CONFIG_T1040D4RDB)
+#elif defined(CONFIG_TARGET_T1040D4RDB)
 #define FDTFILE		"t1042rdb/t1040d4rdb.dtb"
 #elif defined(CONFIG_T1042D4RDB)
 #define FDTFILE		"t1042rdb/t1042d4rdb.dtb"

scripts/config_whitelist.txt

@@ -7827,7 +7827,6 @@ CONFIG_SYS_ZYNQ_SPI_WAIT
 CONFIG_SYS_i2C_FSL
 CONFIG_T1023RDB
 CONFIG_T1024RDB
-CONFIG_T1040D4RDB
 CONFIG_T1040QDS
 CONFIG_T1040RDB
 CONFIG_T1042D4RDB