Skip to content
Snippets Groups Projects
Commit 93b25c08 authored by Simon Glass's avatar Simon Glass Committed by Tom Rini
Browse files

arm: Remove omap3_sdp3430 board 


This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: default avatarSimon Glass <sjg@chromium.org>
parent 8dc372f9
No related branches found
No related tags found
No related merge requests found
Expand all Hide whitespace changes
Inline Side-by-side
Showing
with 0 additions and 976 deletions
arch/arm/cpu/armv7/omap3/Kconfig
+ 0
− 4
View file @ 93b25c08
......@@ -12,9 +12,6 @@ config TARGET_MT_VENTOUX
bool "TeeJet Mt.Ventoux"
select SUPPORT_SPL
config TARGET_OMAP3_SDP3430
bool "TI OMAP3430 SDP"
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select SUPPORT_SPL
......@@ -125,7 +122,6 @@ config SYS_SOC
source "board/logicpd/am3517evm/Kconfig"
source "board/teejet/mt_ventoux/Kconfig"
source "board/ti/sdp3430/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
source "board/compulab/cm_t3517/Kconfig"
......
board/ti/sdp3430/Kconfig deleted 100644 → 0
+ 0
− 12
View file @ 8dc372f9
if TARGET_OMAP3_SDP3430
config SYS_BOARD
default "sdp3430"
config SYS_VENDOR
default "ti"
config SYS_CONFIG_NAME
default "omap3_sdp3430"
endif
board/ti/sdp3430/MAINTAINERS deleted 100644 → 0
+ 0
− 6
View file @ 8dc372f9
SDP3430 BOARD
M: Nishanth Menon <nm@ti.com>
S: Maintained
F: board/ti/sdp3430/
F: include/configs/omap3_sdp3430.h
F: configs/omap3_sdp3430_defconfig
board/ti/sdp3430/Makefile deleted 100644 → 0
+ 0
− 8
View file @ 8dc372f9
#
# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y := sdp.o
board/ti/sdp3430/config.mk deleted 100644 → 0
+ 0
− 17
View file @ 8dc372f9
#
# (C) Copyright 2006-2009
# Texas Instruments Incorporated, <www.ti.com>
#
# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu
# see http://www.ti.com/ for more information on Texas Instruments
#
# SPDX-License-Identifier: GPL-2.0+
#
# Physical Address:
# 8000'0000 (bank0)
# A000/0000 (bank1)
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
# For use with external or internal boots.
CONFIG_SYS_TEXT_BASE = 0x80008000
board/ti/sdp3430/sdp.c deleted 100644 → 0
+ 0
− 203
View file @ 8dc372f9
/*
* (C) Copyright 2004-2009
* Texas Instruments Incorporated, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
#include "sdp.h"
DECLARE_GLOBAL_DATA_PTR;
const omap3_sysinfo sysinfo = {
DDR_DISCRETE,
"OMAP3 SDP3430 board",
#if defined(CONFIG_ENV_IS_IN_ONENAND)
"OneNAND",
#elif defined(CONFIG_ENV_IS_IN_NAND)
"NAND",
#else
"NOR",
#endif
};
/* Timing definitions for GPMC controller for Sibley NOR */
static const u32 gpmc_sdp_nor[] = {
SDP3430_NOR_GPMC_CONF1,
SDP3430_NOR_GPMC_CONF2,
SDP3430_NOR_GPMC_CONF3,
SDP3430_NOR_GPMC_CONF4,
SDP3430_NOR_GPMC_CONF5,
SDP3430_NOR_GPMC_CONF6,
/*CONF7- computed as params */
};
/*
* Timing definitions for GPMC controller for Debug Board
* Debug board contains access to ethernet and DIP Switch setting
* information etc.
*/
static const u32 gpmc_sdp_debug[] = {
SDP3430_DEBUG_GPMC_CONF1,
SDP3430_DEBUG_GPMC_CONF2,
SDP3430_DEBUG_GPMC_CONF3,
SDP3430_DEBUG_GPMC_CONF4,
SDP3430_DEBUG_GPMC_CONF5,
SDP3430_DEBUG_GPMC_CONF6,
/*CONF7- computed as params */
};
/* Timing defintions for GPMC OneNAND */
static const u32 gpmc_sdp_onenand[] = {
SDP3430_ONENAND_GPMC_CONF1,
SDP3430_ONENAND_GPMC_CONF2,
SDP3430_ONENAND_GPMC_CONF3,
SDP3430_ONENAND_GPMC_CONF4,
SDP3430_ONENAND_GPMC_CONF5,
SDP3430_ONENAND_GPMC_CONF6,
/*CONF7- computed as params */
};
/* GPMC definitions for GPMC NAND */
static const u32 gpmc_sdp_nand[] = {
SDP3430_NAND_GPMC_CONF1,
SDP3430_NAND_GPMC_CONF2,
SDP3430_NAND_GPMC_CONF3,
SDP3430_NAND_GPMC_CONF4,
SDP3430_NAND_GPMC_CONF5,
SDP3430_NAND_GPMC_CONF6,
/*CONF7- computed as params */
};
/* gpmc_cfg is initialized by gpmc_init and we use it here */
extern struct gpmc *gpmc_cfg;
/**
* @brief board_init - gpmc and basic setup as phase1 of boot sequence
*
* @return 0
*/
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* TODO: Dynamically pop out CS mapping and program accordingly */
/* Configure devices for default ON ON ON settings */
enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
GPMC_SIZE_16M);
enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
GPMC_SIZE_16M);
enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
GPMC_SIZE_16M);
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
return 0;
}
#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c)
#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
/**
* @brief board_eth_init Take the Ethernet controller out of reset and wait
* for the EEPROM load to complete.
*/
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_LAN91C96
int cnt = 20;
writew(0x0, LAN_RESET_REGISTER);
do {
writew(0x1, LAN_RESET_REGISTER);
udelay(100);
if (cnt == 0)
goto reset_err_out;
--cnt;
} while (readw(LAN_RESET_REGISTER) != 0x1);
cnt = 20;
do {
writew(0x0, LAN_RESET_REGISTER);
udelay(100);
if (cnt == 0)
goto reset_err_out;
--cnt;
} while (readw(LAN_RESET_REGISTER) != 0x0000);
udelay(1000);
writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
udelay(1000);
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
reset_err_out:
#endif
return rc;
}
/**
* @brief misc_init_r - Configure SDP board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
*
* @return 0
*/
int misc_init_r(void)
{
/* Partial setup:
* VAUX3 - 2.8V for DVI
* VPLL1 - 1.8V
* VDAC - 1.8V
* and turns on LEDA/LEDB (not needed ... NOP?)
*/
twl4030_power_init();
/* FIXME finish setup:
* VAUX1 - 2.8V for mainboard I/O
* VAUX2 - 2.8V for camera
* VAUX4 - 1.8V for OMAP3 CSI
* VMMC1 - 3.15V (init, variable) for MMC1
* VMMC2 - 1.85V for MMC2
* VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
* VPLL2 - 1.8V
*/
return 0;
}
/**
* @brief set_muxconf_regs Setting up the configuration Mux registers
* specific to the hardware. Many pins need to be moved from protect
* to primary mode.
*/
void set_muxconf_regs(void)
{
/* platform specific muxes */
MUX_SDP3430();
}
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
void board_mmc_power_init(void)
{
twl4030_power_mmc_init(0);
}
#endif
board/ti/sdp3430/sdp.h deleted 100644 → 0
+ 0
− 401
View file @ 8dc372f9
This diff is collapsed.
configs/omap3_sdp3430_defconfig deleted 100644 → 0
+ 0
− 7
View file @ 8dc372f9
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_SDP3430=y
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_FPGA is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_SYS_PROMPT="OMAP34XX SDP # "
include/configs/omap3_sdp3430.h deleted 100644 → 0
+ 0
− 318
View file @ 8dc372f9
/*
* (C) Copyright 2006-2009
* Texas Instruments Incorporated.
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <x0khasim@ti.com>
* Nishanth Menon <nm@ti.com>
*
* Configuration settings for the 3430 TI SDP3430 board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* TODO: REMOVE THE FOLLOWING
* Retained the following till size.h is removed in u-boot
*/
#include <linux/sizes.h>
/*
* High Level Configuration Options
*/
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
#define CONFIG_OMAP_COMMON
/* Common ARM Erratas */
#define CONFIG_ARM_ERRATA_454179
#define CONFIG_ARM_ERRATA_430973
#define CONFIG_ARM_ERRATA_621766
#define CONFIG_SDRC /* The chip has SDRC controller */
#include <asm/arch/cpu.h> /* get chip and board defs */
#include <asm/arch/omap.h>
/*
* NOTE: these #defines presume standard SDP jumper settings.
* In particular:
* - 26 MHz clock (not 19.2 or 38.4 MHz)
* - Boot from 128MB NOR, not NAND or OneNAND
*
* At this writing, OMAP3 U-Boot support doesn't permit concurrent
* support for all the flash types the board supports.
*/
#define CONFIG_DISPLAY_CPUINFO 1
#define CONFIG_DISPLAY_BOARDINFO 1
/* Clock Defines */
#define V_OSCK 26000000 /* Clock output from T2 */
#define V_SCLK (V_OSCK >> 1)
#define CONFIG_MISC_INIT_R
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
#define CONFIG_REVISION_TAG 1
#define CONFIG_OF_LIBFDT 1
/*
* Size of malloc() pool
* Total Size Environment - 256k
* Malloc - add 256k
*/
#define CONFIG_ENV_SIZE (256 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
/*--------------------------------------------------------------------------*/
/*
* Hardware drivers
*/
/*
* TWL4030
*/
#define CONFIG_TWL4030_POWER 1
/*
* serial port - NS16550 compatible
*/
#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
* swapped with UART2 via jumpering. Downsides of using J8: it doesn't
* support UART boot (that's only for UART3); it prevents sharing a Linux
* kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
*
* UART boot uses UART3 on J9, and the SDP user's guide says to use
* that for console. Downsides of using J9: you can't use IRDA too;
* since UART3 isn't in the CORE power domain, it may be a bit less
* usable in certain PM-sensitive debug scenarios.
*/
#undef CONSOLE_J9 /* else J8/UART1 (innermost) */
#ifdef CONSOLE_J9
#define CONFIG_CONS_INDEX 3
#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
#define CONFIG_SERIAL3 3 /* UART3 */
#else
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
#define CONFIG_SERIAL1 1 /* UART1 */
#endif
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
/*
* I2C for power management setup
*/
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
#define CONFIG_SYS_I2C_OMAP34XX
/* OMITTED: single 1 Gbit MT29F1G NAND flash */
/*
* NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
*/
#define CONFIG_SYS_FLASH_BASE 0x10000000
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */
#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CONFIG_SYS_FLASH_CFI_WIDTH 2
#define PHYS_FLASH_SIZE (128 << 20)
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */
/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10)
#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
/*--------------------------------------------------------------------------*/
/* Enabled commands */
#define CONFIG_CMD_DHCP /* DHCP Support */
#define CONFIG_CMD_EXT2 /* EXT2 Support */
#define CONFIG_CMD_FAT /* FAT support */
#define CONFIG_CMD_I2C /* I2C serial bus support */
#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
#define CONFIG_CMD_MMC /* MMC support */
/*--------------------------------------------------------------------------*/
/*
* MMC boot support
*/
#if defined(CONFIG_CMD_MMC)
#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
#endif
/*----------------------------------------------------------------------------
* SMSC9115 Ethernet from SMSC9118 family
*----------------------------------------------------------------------------
*/
#if defined(CONFIG_CMD_NET)
#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE DEBUG_BASE
#define CONFIG_LAN91C96_EXT_PHY
#define CONFIG_BOOTP_SEND_HOSTNAME
/*
* BOOTP fields
*/
#define CONFIG_BOOTP_SUBNETMASK 0x00000001
#define CONFIG_BOOTP_GATEWAY 0x00000002
#define CONFIG_BOOTP_HOSTNAME 0x00000004
#define CONFIG_BOOTP_BOOTPATH 0x00000010
#endif /* (CONFIG_CMD_NET) */
/*
* Environment setup
*
* Default boot order: mmc bootscript, MMC uImage, NOR image.
* Network booting environment must be configured at site.
*/
/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS0,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
"norargs=setenv bootargs console=${console} " \
"root=/dev/mtdblock3 rw " \
"rootfstype=jffs2\0" \
"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from MMC/SD ...; " \
"autoscr ${loadaddr}\0" \
"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
"mmcboot=echo Booting from MMC/SD ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
"norboot=echo Booting from NOR ...; " \
"run norargs; " \
"bootm 0x80000\0" \
#define CONFIG_BOOTCOMMAND \
"if mmcinit; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
"if run loaduimage; then " \
"run mmcboot; " \
"else run norboot; " \
"fi; " \
"fi; " \
"else run norboot; fi"
#define CONFIG_AUTO_COMPLETE 1
/*--------------------------------------------------------------------------*/
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
* a basic sanity check ONLY
* IF you would like to increase coverage, increase the end address
* or run the test with custom options
*/
#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20))
/* Default load address */
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
/*--------------------------------------------------------------------------*/
/*
* 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
* 32KHz clk, or from external sig. This rate is divided by a local divisor.
*/
#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE 0x800
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
/*
* SDRAM Memory Map
*/
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
/*--------------------------------------------------------------------------*/
/*
* NOR FLASH usage ... default nCS0:
* - one 256KB sector for U-Boot
* - one 256KB sector for its parameters (not all used)
* - eight sectors (2 MB) for kernel
* - rest for JFFS2
*/
/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
/*
* NAND FLASH usage ... default nCS1:
* - four 128KB sectors for X-Loader
* - four 128KB sectors for U-Boot
* - two 128KB sector for its parameters
* - 32 sectors (4 MB) for kernel
* - rest for filesystem
*/
/*
* OneNAND FLASH usage ... default nCS2:
* - four 128KB sectors for X-Loader
* - two 128KB sectors for U-Boot
* - one 128KB sector for its parameters
* - sixteen sectors (2 MB) for kernel
* - rest for filesystem
*/
#define CONFIG_SYS_CACHELINE_SIZE 64
#endif /* __CONFIG_H */
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment