qemu-mips: Cleanup whitespace, indentation, etc.

No functional change.

This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD.
Then I re-created from scratch, and changed more lines than the original.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>

include/configs/qemu-mips.h

@@ -22,31 +22,31 @@
  */
 
 /*
- * This file contains the configuration parameters for the dbau1x00 board.
+ * This file contains the configuration parameters for qemu-mips target.
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MIPS32		1  /* MIPS32 CPU core	*/
-#define CONFIG_QEMU_MIPS        1
+#define CONFIG_MIPS32		1	/* MIPS32 CPU core */
+#define CONFIG_QEMU_MIPS	1
 #define CONFIG_MISC_INIT_R
 
 /*IP address is default used by Qemu*/
-#define CONFIG_IPADDR		10.0.2.15    	     /* Our IP address */
-#define CONFIG_SERVERIP		10.0.2.2	     /* Server IP address*/
+#define CONFIG_IPADDR		10.0.2.15	/* Our IP address */
+#define CONFIG_SERVERIP		10.0.2.2	/* Server IP address */
 
-#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds	*/
+#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
 
 #define CONFIG_BAUDRATE		115200
 
 /* valid baudrates */
 #define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-#define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
-#undef	CONFIG_BOOTARGS
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#undef CONFIG_BOOTARGS
 
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
+#define CONFIG_EXTRA_ENV_SETTINGS					\
 	"addmisc=setenv bootargs ${bootargs} "				\
 		"console=ttyS0,${baudrate} "				\
 		"panic=1\0"						\
@@ -56,7 +56,6 @@
 
 #define CONFIG_BOOTCOMMAND	"bootp;bootelf"
 
-
 /*
  * BOOTP options
  */
@@ -65,7 +64,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
@@ -74,10 +72,10 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
-#undef  CONFIG_CMD_IMLS
-#undef  CONFIG_CMD_FLASH
-#undef  CONFIG_CMD_LOADB
-#undef  CONFIG_CMD_LOADS
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
 #define CONFIG_CMD_DHCP
 
 #define CONFIG_DRIVER_NE2000
@@ -86,15 +84,15 @@
 #define CFG_NO_FLASH
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
-#define CFG_NS16550_CLK         115200
-#define CFG_NS16550_COM1        (0xb40003f8)
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		115200
+#define CFG_NS16550_COM1	(0xb40003f8)
 #define CONFIG_CONS_INDEX	1
 
 #define CONFIG_CMD_IDE
 #define CONFIG_DOS_PARTITION
 
-#define CFG_IDE_MAXBUS	2
+#define CFG_IDE_MAXBUS		2
 #define CFG_ATA_IDE0_OFFSET	(0x1f0)
 #define CFG_ATA_IDE1_OFFSET	(0x170)
 #define CFG_ATA_DATA_OFFSET	(0)
@@ -106,18 +104,18 @@
 /*
  * Miscellaneous configurable options
  */
-#define	CFG_LONGHELP				/* undef to save memory      */
+#define CFG_LONGHELP				/* undef to save memory */
 
-#define	CFG_PROMPT		"qemu-mips # "	/* Monitor Command Prompt    */
+#define CFG_PROMPT		"qemu-mips # "	/* Monitor Command Prompt */
 
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2	"> "
 
-#define	CFG_CBSIZE		256		/* Console I/O Buffer Size   */
-#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
-#define	CFG_MAXARGS		16		/* max number of command args*/
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args */
 
 #define CFG_MALLOC_LEN		128*1024
 
@@ -125,11 +123,11 @@
 
 #define CFG_MHZ			132
 
-#define CFG_HZ                  (CFG_MHZ * 1000000)
+#define CFG_HZ			(CFG_MHZ * 1000000)
 
-#define CFG_SDRAM_BASE		0x80000000     /* Cached addr */
+#define CFG_SDRAM_BASE		0x80000000	/* Cached addr */
 
-#define	CFG_LOAD_ADDR		0x81000000     /* default load address	*/
+#define CFG_LOAD_ADDR		0x81000000	/* default load address */
 
 #define CFG_MEMTEST_START	0x80100000
 #define CFG_MEMTEST_END		0x80800000
@@ -139,21 +137,22 @@
  */
 
 /* The following #defines are needed to get flash environment right */
-#define	CFG_MONITOR_BASE	TEXT_BASE
-#define	CFG_MONITOR_LEN		(192 << 10)
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 << 10)
 
 #define CFG_INIT_SP_OFFSET	0x400000
 
 /* We boot from this flash, selected with dip switch */
 #define CFG_FLASH_BASE		0xbfc00000
 
-#define	CFG_ENV_IS_NOWHERE	1
+#define CFG_ENV_IS_NOWHERE	1
 
-/* Address and size of Primary Environment Sector	*/
+/* Address and size of Primary Environment Sector */
 #define CFG_ENV_SIZE		0x10000
+
 #undef CONFIG_NET_MULTI
 
-#define MEM_SIZE 128
+#define MEM_SIZE		128
 
 #undef CONFIG_MEMSIZE_IN_BYTES
 
@@ -164,4 +163,4 @@
 #define CFG_ICACHE_SIZE		16384
 #define CFG_CACHELINE_SIZE	32
 
-#endif	/* __CONFIG_H */
+#endif /* __CONFIG_H */