sunxi: Add Ippo_q8h_v1_2_a33_1024x600 defconfig

Add a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb,
with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

board/sunxi/MAINTAINERS

@@ -38,6 +38,7 @@ F:	configs/qt840a_defconfig
 F:	configs/Wits_Pro_A20_DKT_defconfig
 F:	include/configs/sun8i.h
 F:	configs/Ippo_q8h_v1_2_defconfig
+F:	configs/Ippo_q8h_v1_2_a33_1024x600_defconfig
 
 A20-OLINUXINO-LIME BOARD
 M:	FUKAUMI Naoki <naobsd@gmail.com>

configs/Ippo_q8h_v1_2_a33_1024x600_defconfig

+# This is a defconfig for generic 7" tablets using the Ippo q8h v1.2 pcb,
+# with an A33 SoC (the pcb can take an A23 or an A33), and a 1024x600 LCD
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+CONFIG_FDTFILE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dtb"
+CONFIG_USB_MUSB_SUNXI=y
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:159,ri:160,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0"
+CONFIG_VIDEO_LCD_DCLK_PHASE=0
+CONFIG_VIDEO_LCD_POWER="PH7"
+CONFIG_VIDEO_LCD_BL_EN="PH6"
+CONFIG_VIDEO_LCD_BL_PWM="PH0"
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=480
+# zq = 0x3bbb
+CONFIG_DRAM_ZQ=15291
+# Wifi power
+CONFIG_AXP221_DLDO1_VOLT=3300
+# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
+CONFIG_AXP221_ALDO1_VOLT=3000