Merge git://git.denx.de/u-boot-fsl-qoriq

arch/arm/Kconfig

@@ -1034,6 +1034,19 @@ config TARGET_LS1012A2G5RDB
 	  development platform that supports the QorIQ LS1012A
 	  Layerscape Architecture processor.
 
+config TARGET_LS1012AFRWY
+	bool "Support ls1012afrwy"
+	select ARCH_LS1012A
+	select BOARD_LATE_INIT
+	select ARM64
+	imply SCSI
+	imply SCSI_AHCI
+	help
+	 Support for Freescale LS1012AFRWY platform.
+	 The LS1012A FRWY board (FRWY) is a high-performance
+	 development platform that supports the QorIQ LS1012A
+	 Layerscape Architecture processor.
+
 config TARGET_LS1012AFRDM
 	bool "Support ls1012afrdm"
 	select ARCH_LS1012A

arch/arm/cpu/armv8/Kconfig

@@ -91,6 +91,7 @@ config PSCI_RESET
 		   !TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
 		   !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
 		   !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
+		   !TARGET_LS1012AFRWY && \
 		   !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
 		   !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
 		   !TARGET_LS2081ARDB && \

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -261,40 +261,6 @@ config SYS_LS_PPA_FW_IN_NAND
 
 endchoice
 
-config SYS_LS_PPA_FW_ADDR
-	hex "Address of PPA firmware loading from"
-	depends on FSL_LS_PPA
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
-	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
-	default 0x400000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x400000 if SYS_LS_PPA_FW_IN_NAND
-
-	help
-	  If the PPA firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
-config SYS_LS_PPA_ESBC_ADDR
-	hex "hdr address of PPA firmware loading from"
-	depends on FSL_LS_PPA && CHAIN_OF_TRUST
-	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1043A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1046A
-	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1012A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT && ARCH_LS2080A
-	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS2080A
-	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1088A
-	default 0x680000 if SYS_LS_PPA_FW_IN_MMC
-	default 0x680000 if SYS_LS_PPA_FW_IN_NAND
-	help
-	  If the PPA header firmware locate at XIP flash, such as NOR or
-	  QSPI flash, this address is a directly memory-mapped.
-	  If it is in a serial accessed flash, such as NAND and SD
-	  card, it is a byte offset.
-
 config LS_PPA_ESBC_HDR_SIZE
 	hex "Length of PPA ESBC header"
 	depends on FSL_LS_PPA && CHAIN_OF_TRUST && !SYS_LS_PPA_FW_IN_XIP

arch/arm/dts/Makefile

@@ -229,7 +229,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
 	fsl-ls1012a-qds.dtb \
 	fsl-ls1012a-rdb.dtb \
 	fsl-ls1012a-2g5rdb.dtb \
-	fsl-ls1012a-frdm.dtb
+	fsl-ls1012a-frdm.dtb \
+	fsl-ls1012a-frwy.dtb
 
 dtb-$(CONFIG_TARGET_DRAGONBOARD410C) += dragonboard410c.dtb
 dtb-$(CONFIG_TARGET_DRAGONBOARD820C) += dragonboard820c.dtb

arch/arm/dts/fsl-ls1012a-frwy.dts

+// SPDX-License-Identifier: GPL-2.0+ OR X11
+/*
+ * NXP ls1012a FRWY board device tree source
+ *
+ * Copyright 2018 NXP
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	model = "FRWY-LS1012A Board";
+
+	aliases {
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: w25q16dw@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&duart0 {
+	status = "okay";
+};

board/freescale/common/vid.c

@@ -428,7 +428,7 @@ int adjust_vdd(ulong vdd_override)
 		0,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */
-		0,      /* reserved */
+		9000,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */
 		0,      /* reserved */

board/freescale/ls1012afrdm/Kconfig

@@ -12,16 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012afrdm"
 
+config SYS_LS_PFE_FW_ADDR
+	hex "Flash address of PFE firmware"
+	default 0x40a00000
+
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
 	def_bool y
 	select PHYLIB
 	imply PHY_REALTEK
-
-config SYS_LS_PFE_FW_ADDR
-	hex "Flash address of PFE firmware"
-	default 0x40a00000
+	imply PHY_ATHEROS
 
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
@@ -41,6 +47,38 @@ config PFE_EMAC2_PHY_ADDR
 
 endif
 
-source "board/freescale/common/Kconfig"
+if TARGET_LS1012AFRWY
+
+config SYS_BOARD
+	default "ls1012afrdm"
 
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_SOC
+	default "fsl-layerscape"
+
+config SYS_CONFIG_NAME
+	default "ls1012afrwy"
+
+config SYS_LS_PFE_FW_ADDR
+	hex "Flash address of PFE firmware"
+	default 0x40020000
+
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40060000
+
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x401f4000
+
+config SYS_LS_PFE_ESBC_ADDR
+	hex "PFE Firmware HDR Addr"
+	default 0x401f8000
+
+endif
+
+if TARGET_LS1012AFRDM || TARGET_LS1012AFRWY
+source "board/freescale/common/Kconfig"
 endif

board/freescale/ls1012afrdm/MAINTAINERS

@@ -4,3 +4,14 @@ S:	Maintained
 F:	board/freescale/ls1012afrdm/
 F:	include/configs/ls1012afrdm.h
 F:	configs/ls1012afrdm_qspi_defconfig
+
+LS1012AFRWY BOARD
+M:      Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
+S:      Maintained
+F:      board/freescale/ls1012afrwy/
+F:      include/configs/ls1012afrwy.h
+F:      configs/ls1012afrwy_qspi_defconfig
+
+M:	Vinitha V Pillai <vinitha.pillai@nxp.com>
+S:	Maintained
+F:	configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig

board/freescale/ls1012afrdm/ls1012afrdm.c

 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
  */
 
 #include <common.h>
@@ -13,23 +13,75 @@
 #endif
 #include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
+#include <fsl_esdhc.h>
 #include <hwconfig.h>
 #include <environment.h>
 #include <fsl_mmdc.h>
 #include <netdev.h>
+#include <fsl_sec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+static inline int get_board_version(void)
+{
+	struct ccsr_gpio *pgpio = (void *)(GPIO1_BASE_ADDR);
+	int val;
+
+	val = in_be32(&pgpio->gpdat);
+
+	return val;
+}
+
 int checkboard(void)
 {
+#ifdef CONFIG_TARGET_LS1012AFRDM
 	puts("Board: LS1012AFRDM ");
+#else
+	int rev;
+
+	rev = get_board_version();
+
+	puts("Board: FRWY-LS1012A ");
+
+	puts("Version");
+
+	switch (rev) {
+	case BOARD_REV_A:
+		puts(": RevA ");
+		break;
+	case BOARD_REV_B:
+		puts(": RevB ");
+		break;
+	default:
+		puts(": unknown");
+		break;
+	}
+#endif
+
+	return 0;
+}
+
+#ifdef CONFIG_TARGET_LS1012AFRWY
+int esdhc_status_fixup(void *blob, const char *compat)
+{
+	char esdhc0_path[] = "/soc/esdhc@1560000";
+	char esdhc1_path[] = "/soc/esdhc@1580000";
+
+	do_fixup_by_path(blob, esdhc0_path, "status", "okay",
+			 sizeof("okay"), 1);
 
+	do_fixup_by_path(blob, esdhc1_path, "status", "disabled",
+			 sizeof("disabled"), 1);
 	return 0;
 }
+#endif
 
 int dram_init(void)
 {
-	static const struct fsl_mmdc_info mparam = {
+#ifdef CONFIG_TARGET_LS1012AFRWY
+	int board_rev;
+#endif
+	struct fsl_mmdc_info mparam = {
 		0x04180000,	/* mdctl */
 		0x00030035,	/* mdpdc */
 		0x12554000,	/* mdotc */
@@ -45,9 +97,20 @@ int dram_init(void)
 		0xa1390003,	/* mpzqhwctrl */
 	};
 
-	mmdc_init(&mparam);
+#ifdef CONFIG_TARGET_LS1012AFRWY
+	board_rev = get_board_version();
 
+	if (board_rev & BOARD_REV_B) {
+		mparam.mdctl = 0x05180000;
+		gd->ram_size = SYS_SDRAM_SIZE_1024;
+	} else {
+		gd->ram_size = SYS_SDRAM_SIZE_512;
+	}
+#else
 	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#endif
+	mmdc_init(&mparam);
+
 #if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 	/* This will break-before-make MMU for DDR */
 	update_early_mmu_table();
@@ -78,6 +141,10 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif

board/freescale/ls1012aqds/Kconfig

@@ -12,6 +12,9 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012aqds"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
 
 if FSL_PFE
 

board/freescale/ls1012ardb/Kconfig

@@ -12,6 +12,16 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1012ardb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
@@ -59,6 +69,10 @@ config SYS_SOC
 config SYS_CONFIG_NAME
         default "ls1012a2g5rdb"
 
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+        default 0x40400000
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy

board/freescale/ls1043aqds/Kconfig

@@ -12,6 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1043aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif

board/freescale/ls1043ardb/Kconfig

@@ -22,6 +22,20 @@ config SYS_HAS_ARMV8_SECURE_BASE
 	  If enabled, please also define the value for ARMV8_SECURE_BASE,
 	  for LS1043ARDB, it could be some address in OCRAM.
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif

board/freescale/ls1046aqds/Kconfig

@@ -12,6 +12,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1046aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x60680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif

board/freescale/ls1046ardb/Kconfig

@@ -12,5 +12,20 @@ config SYS_SOC
 
 config SYS_CONFIG_NAME
 	default "ls1046ardb"
+
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x40400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif

board/freescale/ls1088a/Kconfig

@@ -12,6 +12,20 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif
 
@@ -29,5 +43,19 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1088ardb"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+        hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 endif

board/freescale/ls2080aqds/Kconfig

@@ -13,6 +13,22 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls2080aqds"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
+endif
+
 source "board/freescale/common/Kconfig"
 
 endif

board/freescale/ls2080ardb/Kconfig

-
-if TARGET_LS2080ARDB
+if TARGET_LS2080ARDB || TARGET_LS2081ARDB
 
 config SYS_BOARD
 	default "ls2080ardb"
@@ -15,21 +14,21 @@ config SYS_CONFIG_NAME
 
 source "board/freescale/common/Kconfig"
 
+if FSL_LS_PPA
+config SYS_LS_PPA_FW_ADDR
+	hex "PPA Firmware Addr"
+	default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580400000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x400000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x20680000 if SYS_LS_PPA_FW_IN_XIP && QSPI_BOOT
+	default 0x580680000 if SYS_LS_PPA_FW_IN_XIP
+	default 0x680000 if SYS_LS_PPA_FW_IN_MMC || SYS_LS_PPA_FW_IN_NAND
+endif
 endif
-
-if TARGET_LS2081ARDB
-
-config SYS_BOARD
-	default "ls2080ardb"
-
-config SYS_VENDOR
-	default "freescale"
-
-config SYS_SOC
-	default "fsl-layerscape"
-
-config SYS_CONFIG_NAME
-	default "ls2080ardb"
 
 source "board/freescale/common/Kconfig"
 

configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig

+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SECURE_BOOT=y
+CONFIG_SYS_TEXT_BASE=0x40100000
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+# CONFIG_DM_MMC_OPS is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_ETH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_FSL_PFE=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y

configs/ls1012afrwy_qspi_defconfig

+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SYS_TEXT_BASE=0x40100000
+CONFIG_FSL_LS_PPA=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
+CONFIG_QSPI_BOOT=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_DSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y