Import several header files from Linux

Replace AT91CAP9.h file with several splitted header files coming
from the Linux kernel.

This is part 1 of the replacement: pristine header files import.

Signed-off-by: Stelian Pop <stelian@popies.net>

include/asm-arm/arch-at91sam9/at91_pio.h

+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif

include/asm-arm/arch-at91sam9/at91_pit.h

+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif

include/asm-arm/arch-at91sam9/at91_pmc.h

+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91_PMC_MDIV_1			(0 << 8)
+#define			AT91_PMC_MDIV_2			(1 << 8)
+#define			AT91_PMC_MDIV_3			(2 << 8)
+#define			AT91_PMC_MDIV_4			(3 << 8)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif

include/asm-arm/arch-at91sam9/at91_rstc.h

+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+
+#endif

include/asm-arm/arch-at91sam9/at91_spi.h

+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif

include/asm-arm/arch-at91sam9/at91cap9.h

+/*
+ * include/asm-arm/arch-at91/at91cap9.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0		8	/* USART 0 */
+#define AT91CAP9_ID_US1		9	/* USART 1 */
+#define AT91CAP9_ID_US2		10	/* USART 2 */
+#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN		13	/* CAN */
+#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
+#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC	22	/* Ethernet */
+#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
+#define AT91CAP9_ID_DMA		27	/* DMA Controller */
+#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP		29	/* USB Host Port */
+#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS		0xfff78000
+#define AT91CAP9_BASE_TCB0		0xfff7c000
+#define AT91CAP9_BASE_TC0		0xfff7c000
+#define AT91CAP9_BASE_TC1		0xfff7c040
+#define AT91CAP9_BASE_TC2		0xfff7c080
+#define AT91CAP9_BASE_MCI0		0xfff80000
+#define AT91CAP9_BASE_MCI1		0xfff84000
+#define AT91CAP9_BASE_TWI		0xfff88000
+#define AT91CAP9_BASE_US0		0xfff8c000
+#define AT91CAP9_BASE_US1		0xfff90000
+#define AT91CAP9_BASE_US2		0xfff94000
+#define AT91CAP9_BASE_SSC0		0xfff98000
+#define AT91CAP9_BASE_SSC1		0xfff9c000
+#define AT91CAP9_BASE_AC97C		0xfffa0000
+#define AT91CAP9_BASE_SPI0		0xfffa4000
+#define AT91CAP9_BASE_SPI1		0xfffa8000
+#define AT91CAP9_BASE_CAN		0xfffac000
+#define AT91CAP9_BASE_PWMC		0xfffb8000
+#define AT91CAP9_BASE_EMAC		0xfffbc000
+#define AT91CAP9_BASE_ADC		0xfffc0000
+#define AT91CAP9_BASE_ISI		0xfffc4000
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91CAP9_BASE_US0
+#define AT91_USART1	AT91CAP9_BASE_US1
+#define AT91_USART2	AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91CAP9_UDPHS_BASE	0x00600000	/* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#endif

include/asm-arm/arch-at91sam9/at91cap9_matrix.h

+/*
+ * include/asm-arm/arch-at91/at91cap9_matrix.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
+
+#endif

include/asm-arm/arch-at91sam9/at91sam926x_mc.h

+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif