Skip to content
Snippets Groups Projects
Commit 61b57c4a authored by Matthias Fuchs's avatar Matthias Fuchs Committed by Tom Rini
Browse files

ppc4xx: remove AR405 board 


Signed-off-by: default avatarMatthias Fuchs <matthias.fuchs@esd.eu>
parent 2b8a04e5
No related branches found
No related tags found
No related merge requests found
Expand all Hide whitespace changes
Inline Side-by-side
Showing
with 1 addition and 11165 deletions
arch/powerpc/cpu/ppc4xx/Kconfig
+ 0
− 4
View file @ 61b57c4a
...@@ -110,9 +110,6 @@ config TARGET_CATCENTER ...@@ -110,9 +110,6 @@ config TARGET_CATCENTER
config TARGET_PPCHAMELEONEVB config TARGET_PPCHAMELEONEVB
bool "Support PPChameleonEVB" bool "Support PPChameleonEVB"
config TARGET_AR405
bool "Support AR405"
config TARGET_ASH405 config TARGET_ASH405
bool "Support ASH405" bool "Support ASH405"
...@@ -254,7 +251,6 @@ source "board/avnet/v5fx30teval/Kconfig" ...@@ -254,7 +251,6 @@ source "board/avnet/v5fx30teval/Kconfig"
source "board/csb272/Kconfig" source "board/csb272/Kconfig"
source "board/csb472/Kconfig" source "board/csb472/Kconfig"
source "board/dave/PPChameleonEVB/Kconfig" source "board/dave/PPChameleonEVB/Kconfig"
source "board/esd/ar405/Kconfig"
source "board/esd/ash405/Kconfig" source "board/esd/ash405/Kconfig"
source "board/esd/cms700/Kconfig" source "board/esd/cms700/Kconfig"
source "board/esd/cpci2dp/Kconfig" source "board/esd/cpci2dp/Kconfig"
......
board/esd/ar405/Kconfig deleted 100644 → 0
+ 0
− 12
View file @ 2b8a04e5
if TARGET_AR405
config SYS_BOARD
default "ar405"
config SYS_VENDOR
default "esd"
config SYS_CONFIG_NAME
default "AR405"
endif
board/esd/ar405/MAINTAINERS deleted 100644 → 0
+ 0
− 6
View file @ 2b8a04e5
AR405 BOARD
M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
S: Maintained
F: board/esd/ar405/
F: include/configs/AR405.h
F: configs/AR405_defconfig
board/esd/ar405/Makefile deleted 100644 → 0
+ 0
− 8
View file @ 2b8a04e5
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-y = ar405.o flash.o ../common/misc.o
board/esd/ar405/ar405.c deleted 100644 → 0
+ 0
− 394
View file @ 2b8a04e5
/*
* (C) Copyright 2001-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "ar405.h"
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>
DECLARE_GLOBAL_DATA_PTR;
extern void lxt971_no_sleep(void);
/* ------------------------------------------------------------------------- */
#if 0
#define FPGA_DEBUG
#endif
/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] = {
#include "fpgadata.c"
};
const unsigned char fpgadata_xl30[] = {
#include "fpgadata_xl30.c"
};
/*
* include common fpga code (for esd boards)
*/
#include "../common/fpga.c"
int board_early_init_f (void)
{
int index, len, i;
int status;
#ifdef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f ();
#endif
/*
* Boot onboard FPGA
*/
/* first try 40er image */
gd->board_type = 40;
status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
if (status != 0) {
/* try xl30er image */
gd->board_type = 30;
status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30));
if (status != 0) {
/* booting FPGA failed */
#ifndef FPGA_DEBUG
/* set up serial port with default baudrate */
(void) get_clocks ();
gd->baudrate = CONFIG_BAUDRATE;
serial_init ();
console_init_f ();
#endif
printf ("\nFPGA: Booting failed ");
switch (status) {
case ERROR_FPGA_PRG_INIT_LOW:
printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_INIT_HIGH:
printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
break;
case ERROR_FPGA_PRG_DONE:
printf ("(Timeout: DONE not high after programming FPGA)\n ");
break;
}
/* display infos on fpgaimage */
index = 15;
for (i = 0; i < 4; i++) {
len = fpgadata[index];
printf ("FPGA: %s\n", &(fpgadata[index + 1]));
index += len + 3;
}
putc ('\n');
/* delayed reboot */
for (i = 20; i > 0; i--) {
printf ("Rebooting in %2d seconds \r", i);
for (index = 0; index < 1000; index++)
udelay (1000);
}
putc ('\n');
do_reset (NULL, 0, 0, NULL);
}
}
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 16 405GP internally generated; active low; level sensitive
* IRQ 17-24 RESERVED
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
* IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
* IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
* IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
* IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
mtdcr (UIC0ER, 0x00000000); /* disable all ints */
mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */
return 0;
}
/*
* Check Board Identity:
*/
int checkboard (void)
{
int index;
int len;
char str[64];
int i = getenv_f("serial#", str, sizeof (str));
const unsigned char *fpga;
puts ("Board: ");
if (i == -1) {
puts ("### No HW ID - assuming AR405");
} else {
puts(str);
}
puts ("\nFPGA: ");
/* display infos on fpgaimage */
if (gd->board_type == 30) {
fpga = fpgadata_xl30;
} else {
fpga = fpgadata;
}
index = 15;
for (i = 0; i < 4; i++) {
len = fpga[index];
printf ("%s ", &(fpga[index + 1]));
index += len + 3;
}
putc ('\n');
/*
* Disable sleep mode in LXT971
*/
lxt971_no_sleep();
return 0;
}
#if 1 /* test-only: some internal test routines... */
#define DIGEN ((void *)0xf03000b4) /* u8 */
#define DIGOUT ((void *)0xf03000b0) /* u16 */
#define DIGIN ((void *)0xf03000a0) /* u16 */
/*
* Some test routines
*/
int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i;
int k;
int start;
int end;
if (argc != 3) {
puts("Usage: digtest n_start n_end (digtest 0 7)\n");
return 0;
}
start = simple_strtol (argv[1], NULL, 10);
end = simple_strtol (argv[2], NULL, 10);
/*
* Enable digital outputs
*/
out_8(DIGEN, 0x08);
printf("\nStarting digital In-/Out Test from I/O %d to %d (Cntrl-C to abort)...\n",
start, end);
/*
* Set outputs one by one
*/
for (;;) {
for (i=start; i<=end; i++) {
out_be16(DIGOUT, 0x0001 << i);
for (k=0; k<200; k++)
udelay(1000);
if (in_be16(DIGIN) != (0x0001 << i)) {
printf("ERROR: OUT=0x%04X, IN=0x%04X\n",
0x0001 << i, in_be16(DIGIN));
return 0;
}
/* Abort if ctrl-c was pressed */
if (ctrlc()) {
puts("\nAbort\n");
return 0;
}
}
}
return 0;
}
U_BOOT_CMD(
digtest, 3, 1, do_digtest,
"Test digital in-/output",
""
);
#define ERROR_DELTA 256
struct io {
short val;
short dummy;
};
int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
short val;
int i;
int volt;
struct io *out;
struct io *in;
out = (struct io *)0xf0300090;
in = (struct io *)0xf0300000;
i = simple_strtol (argv[1], NULL, 10);
volt = 0;
printf("Setting Channel %d to %dV...\n", i, volt);
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
udelay(10000);
val = in_be16((void *)&(in[i*2].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
val = in_be16((void *)&(in[i*2+1].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
volt = 5;
printf("Setting Channel %d to %dV...\n", i, volt);
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
udelay(10000);
val = in_be16((void *)&(in[i*2].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
val = in_be16((void *)&(in[i*2+1].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
volt = 10;
printf("Setting Channel %d to %dV...\n", i, volt);
out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
udelay(10000);
val = in_be16((void *)&(in[i*2].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
val = in_be16((void *)&(in[i*2+1].val));
printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
(val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
((volt * 0x7fff) / 40) + ERROR_DELTA);
return -1;
}
printf("Channel %d OK!\n", i);
return 0;
}
U_BOOT_CMD(
anatest, 2, 1, do_anatest,
"Test analog in-/output",
""
);
int counter = 0;
void cyclicInt(void *ptr)
{
out_be16((void *)0xf03000e8, 0x0800); /* ack int */
counter++;
}
int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong *incin;
int i;
incin = (ulong *)0xf0300040;
/*
* Clear inc counter
*/
out_be32((void *)&incin[0], 0);
out_be32((void *)&incin[1], 0);
out_be32((void *)&incin[2], 0);
out_be32((void *)&incin[3], 0);
incin = (ulong *)0xf0300050;
/*
* Inc a little
*/
for (i=0; i<10000; i++) {
switch (i & 0x03) {
case 0:
out_8(DIGEN, 0x02);
break;
case 1:
out_8(DIGEN, 0x03);
break;
case 2:
out_8(DIGEN, 0x01);
break;
case 3:
out_8(DIGEN, 0x00);
break;
}
udelay(10);
}
printf("Inc 0 = %d\n", in_be32((void *)&incin[0]));
printf("Inc 1 = %d\n", in_be32((void *)&incin[1]));
printf("Inc 2 = %d\n", in_be32((void *)&incin[2]));
printf("Inc 3 = %d\n", in_be32((void *)&incin[3]));
out_be16((void *)0xf03000e0, 0x0c80-1); /* set counter */
out_be16((void *)0xf03000ec,
in_be16((void *)0xf03000ec) | 0x0800); /* enable int */
irq_install_handler (30, (interrupt_handler_t *) cyclicInt, NULL);
printf("counter=%d\n", counter);
return 0;
}
U_BOOT_CMD(
inctest, 3, 1, do_inctest,
"Test incremental encoder inputs",
""
);
#endif
board/esd/ar405/ar405.h deleted 100644 → 0
+ 0
− 28
View file @ 2b8a04e5
/*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/****************************************************************************
* FLASH Memory Map as used by TQ Monitor:
*
* Start Address Length
* +-----------------------+ 0x4000_0000 Start of Flash -----------------
* | MON8xx code | 0x4000_0100 Reset Vector
* +-----------------------+ 0x400?_????
* | (unused) |
* +-----------------------+ 0x4001_FF00
* | Ethernet Addresses | 0x78
* +-----------------------+ 0x4001_FF78
* | (Reserved for MON8xx) | 0x44
* +-----------------------+ 0x4001_FFBC
* | Lock Address | 0x04
* +-----------------------+ 0x4001_FFC0 ^
* | Hardware Information | 0x40 | MON8xx
* +=======================+ 0x4002_0000 (sector border) -----------------
* | Autostart Header | | Applications
* | ... | v
*
*****************************************************************************/
board/esd/ar405/flash.c deleted 100644 → 0
+ 0
− 85
View file @ 2b8a04e5
/*
* (C) Copyright 2001
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/ppc4xx.h>
#include <asm/processor.h>
/*
* include common flash code (for esd boards)
*/
#include "../common/flash.c"
/*-----------------------------------------------------------------------
* Functions
*/
static ulong flash_get_size (vu_long * addr, flash_info_t * info);
static void flash_get_offsets (ulong base, flash_info_t * info);
/*-----------------------------------------------------------------------
*/
unsigned long flash_init (void)
{
unsigned long size_b0;
int i;
uint pbcr;
unsigned long base_b0;
int size_val = 0;
/* Init: no FLASHes known */
for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
flash_info[i].flash_id = FLASH_UNKNOWN;
}
/* Static FLASH Bank configuration here - FIXME XXX */
size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
if (flash_info[0].flash_id == FLASH_UNKNOWN) {
printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
size_b0, size_b0<<20);
}
/* Setup offsets */
flash_get_offsets (-size_b0, &flash_info[0]);
/* Re-do sizing to get full correct info */
mtdcr(EBC0_CFGADDR, PB0CR);
pbcr = mfdcr(EBC0_CFGDATA);
mtdcr(EBC0_CFGADDR, PB0CR);
base_b0 = -size_b0;
switch (size_b0) {
case 1 << 20:
size_val = 0;
break;
case 2 << 20:
size_val = 1;
break;
case 4 << 20:
size_val = 2;
break;
case 8 << 20:
size_val = 3;
break;
case 16 << 20:
size_val = 4;
break;
}
pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
mtdcr(EBC0_CFGDATA, pbcr);
/* Monitor protection ON by default */
(void)flash_protect(FLAG_PROTECT_SET,
-CONFIG_SYS_MONITOR_LEN,
0xffffffff,
&flash_info[0]);
flash_info[0].size = size_b0;
return (size_b0);
}
board/esd/ar405/fpgadata.c deleted 100644 → 0
+ 0
− 5500
View file @ 2b8a04e5
This diff is collapsed.
board/esd/ar405/fpgadata_xl30.c deleted 100644 → 0
+ 0
− 4872
View file @ 2b8a04e5
This diff is collapsed.
configs/AR405_defconfig deleted 100644 → 0
+ 0
− 3
View file @ 2b8a04e5
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_AR405=y
doc/README.scrapyard
+ 1
− 0
View file @ 61b57c4a
...@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. ...@@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order.
Board Arch CPU Commit Removed Last known maintainer/contact Board Arch CPU Commit Removed Last known maintainer/contact
================================================================================================= =================================================================================================
AR405 ppc4xx 405gpr - - Matthias Fuchs <matthias.fuchs@esd.eu>
APC405 ppc4xx 405gpr - - Matthias Fuchs <matthias.fuchs@esd.eu> APC405 ppc4xx 405gpr - - Matthias Fuchs <matthias.fuchs@esd.eu>
TASREG m68k mcf52x2 - - Matthias Fuchs <matthias.fuchs@esd.eu> TASREG m68k mcf52x2 - - Matthias Fuchs <matthias.fuchs@esd.eu>
A3000 powerpc mpc824x - - A3000 powerpc mpc824x - -
......
include/configs/AR405.h deleted 100644 → 0
+ 0
− 253
View file @ 2b8a04e5
/*
* (C) Copyright 2001-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_405GP 1 /* This is a PPC405GP CPU */
#define CONFIG_AR405 1 /* ...on a AR405 board */
#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
#define CONFIG_BOARD_TYPES 1 /* support board types */
#define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
#if 1
#define CONFIG_BOOTCOMMAND "bootm fff00000" /* autoboot command */
#else
#define CONFIG_BOOTCOMMAND "bootp" /* autoboot command */
#endif
#if 0
#define CONFIG_BOOTARGS "root=/dev/nfs " \
"ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 " \
"nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
#else
#define CONFIG_BOOTARGS "root=/dev/hda1 " \
"ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
#endif
#define CONFIG_PREBOOT /* enable preboot variable */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_PPC4xx_EMAC
#define CONFIG_MII 1 /* MII PHY management */
#define CONFIG_PHY_ADDR 0 /* PHY address */
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PCI
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_ELF
#define CONFIG_CMD_MII
#undef CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_BSP
#undef CONFIG_WATCHDOG /* watchdog disabled */
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
#define CONFIG_SYS_EXT_SERIAL_CLOCK 14745600 /* use external serial clock */
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
57600, 115200, 230400, 460800, 921600 }
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
/*-----------------------------------------------------------------------
* PCI stuff
*-----------------------------------------------------------------------
*/
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
#define PCI_HOST_FORCE 1 /* configure as pci host */
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
#define CONFIG_PCI /* include pci support */
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
#define CONFIG_PCI_PNP /* do pci plug-and-play */
/* resource configuration */
#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0403 /* PCI Device ID: ARISTO405 */
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
#define CONFIG_SYS_PCI_PTM2LA 0xfff00000 /* point to flash */
#define CONFIG_SYS_PCI_PTM2MS 0xfff00001 /* 1MB, enable */
#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
/*
* The following defines are added for buggy IOP480 byte interface.
* All other boards should use the standard values (CPCI405 etc.)
*/
#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SECT_SIZE 0x10000 /* see README - env sector total size */
#define CONFIG_ENV_SIZE 0x04000 /* Size of Environment */
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
/*
* Init Memory Controller:
*
* BR0/1 and OR0/1 (FLASH)
*/
#define FLASH_BASE0_PRELIM 0xFFC00000 /* FLASH bank #0 */
/*-----------------------------------------------------------------------
* External Bus Controller (EBC) Setup
*/
/* Memory Bank 0 (Flash Bank 0) initialization */
#define CONFIG_SYS_EBC_PB0AP 0x92015480
#define CONFIG_SYS_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
/* Memory Bank 1 (CAN0, 1, 2, 3) initialization */
#define CONFIG_SYS_EBC_PB1AP 0x01000380 /* enable Ready, BEM=0 */
#define CONFIG_SYS_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
/* Memory Bank 2 (Expension Bus) initialization */
#define CONFIG_SYS_EBC_PB2AP 0x01000280 /* disable Ready, BEM=0 */
#define CONFIG_SYS_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
/* Memory Bank 3 (16552) initialization */
#define CONFIG_SYS_EBC_PB3AP 0x01000380 /* enable Ready, BEM=0 */
#define CONFIG_SYS_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
/* Memory Bank 4 (FPGA regs) initialization */
#define CONFIG_SYS_EBC_PB4AP 0x01005380 /* enable Ready, BEM=0 */
#define CONFIG_SYS_EBC_PB4CR 0xF031C000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=32bit */
/* Memory Bank 5 (Flash Bank 1/DUMMY) initialization */
#define CONFIG_SYS_EBC_PB5AP 0x92015480
#define CONFIG_SYS_EBC_PB5CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in data cache)
*/
#define CONFIG_SYS_INIT_DCACHE_CS 7 /* use cs # 7 for data cache memory */
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* use data cache */
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
#endif /* __CONFIG_H */
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment