board: ge: bx50v3: remove redundant targets

This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3.
The boards are identified automatically at runtime.

Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Nandor Han <nandor.han@ge.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>

arch/arm/mach-imx/mx6/Kconfig

@@ -167,18 +167,8 @@ config TARGET_EMBESTMX6BOARDS
 	bool "embestmx6boards"
 	select BOARD_LATE_INIT
 
-config TARGET_GE_B450V3
-	bool "General Electric B450v3"
-	select BOARD_LATE_INIT
-	select MX6Q
-
-config TARGET_GE_B650V3
-	bool "General Electric B650v3"
-	select BOARD_LATE_INIT
-	select MX6Q
-
-config TARGET_GE_B850V3
-	bool "General Electric B850v3"
+config TARGET_GE_BX50V3
+	bool "General Electric Bx50v3"
 	select BOARD_LATE_INIT
 	select MX6Q
 

board/ge/bx50v3/Kconfig

-if TARGET_GE_B450V3 || TARGET_GE_B650V3 || TARGET_GE_B850V3
+if TARGET_GE_BX50V3
 
 config IMX_CONFIG
 	default "board/ge/bx50v3/bx50v3.cfg"

configs/ge_b650v3_defconfig

-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_TARGET_GE_B650V3=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_DEFAULT_FDT_FILE="imx6q-b650v3.dtb"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_EXT=y
-CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
-CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_CMD_E1000=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_SPI_FLASH_WINBOND=y

configs/ge_b850v3_defconfig

-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_TARGET_GE_B850V3=y
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=1
-CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
-CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_DEFAULT_FDT_FILE="imx6q-b850v3.dtb"
-CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_LAST_STAGE_INIT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SF=y
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FS_GENERIC=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_EXT=y
-CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="1:5"
-CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000
-CONFIG_FSL_ESDHC=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_NETDEVICES=y
-CONFIG_E1000=y
-CONFIG_CMD_E1000=y
-CONFIG_SPI=y
-CONFIG_MXC_SPI=y
-CONFIG_OF_LIBFDT=y
-# CONFIG_EFI_LOADER is not set
-CONFIG_SPI_FLASH_WINBOND=y

configs/ge_b450v3_defconfig → configs/ge_bx50v3_defconfig

 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x17800000
-CONFIG_TARGET_GE_B450V3=y
+CONFIG_TARGET_GE_BX50V3=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=1
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_DEFAULT_FDT_FILE="imx6q-b450v3.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_HUSH_PARSER=y

include/configs/ge_bx50v3.h

@@ -14,16 +14,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/mach-imx/gpio.h>
 
-#if defined(CONFIG_TARGET_GE_B450V3)
-#define CONFIG_BOARD_NAME	"General Electric B450v3"
-#elif defined(CONFIG_TARGET_GE_B650V3)
-#define CONFIG_BOARD_NAME	"General Electric B650v3"
-#elif defined(CONFIG_TARGET_GE_B850V3)
-#define CONFIG_BOARD_NAME	"General Electric B850v3"
-#undef BX50V3_BOOTARGS_EXTRA
-#else
-#define CONFIG_BOARD_NAME	"General Electric BA16 Generic"
-#endif
+#define CONFIG_BOARD_NAME	"General Electric Bx50v3"
 
 #define CONFIG_MXC_UART_BASE	UART3_BASE
 #define CONSOLE_DEV	"ttymxc2"