configs: Re-sync CONFIG_CMD_IMLS with moveconfig

The option is specified in Kconfig, but still a few config header files
are overriding the choice by #undef'ing it. Re-sync the option with
moveconfig to rid of the #undefs.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>

configs/ls1012afrdm_qspi_defconfig

@@ -14,7 +14,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y

configs/ls1012aqds_qspi_defconfig

@@ -14,7 +14,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_GPT=y

configs/ls1012ardb_qspi_defconfig

@@ -14,7 +14,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y

configs/ls1021aiot_qspi_defconfig

@@ -3,7 +3,6 @@ CONFIG_TARGET_LS1021AIOT=y
 CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
 CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y

configs/ls1021aiot_sdcard_defconfig

@@ -6,7 +6,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xe8
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_FAT=y

configs/ls1088aqds_qspi_defconfig

@@ -10,7 +10,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y

configs/ls1088ardb_qspi_defconfig

@@ -10,7 +10,6 @@ CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
 CONFIG_CMD_I2C=y

configs/ls2080aqds_nand_defconfig

@@ -18,7 +18,6 @@ CONFIG_SPL=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_GPT=y

configs/ls2080aqds_qspi_defconfig

@@ -10,7 +10,6 @@ CONFIG_QSPI_BOOT=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256"
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_GPT=y

configs/ls2080aqds_sdcard_defconfig

@@ -21,7 +21,6 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/mx7ulp_evk_defconfig

@@ -4,7 +4,6 @@ CONFIG_TARGET_MX7ULP_EVK=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/mx7ulp_evk_plugin_defconfig

@@ -4,7 +4,6 @@ CONFIG_TARGET_MX7ULP_EVK=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
 CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/s32v234evb_defconfig

@@ -7,6 +7,5 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyLF0 root=/dev/ram rw"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_IMLS=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_OF_LIBFDT=y

configs/zc5202_defconfig

@@ -18,7 +18,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

configs/zc5601_defconfig

@@ -18,7 +18,6 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_CMD_IMLS=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y

include/configs/el6x_common.h

@@ -56,9 +56,6 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_MXC_UART_BASE	UART2_BASE
 
-/* Command definition */
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_BOARD_NAME	EL6Q
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

include/configs/ls1012a_common.h

@@ -82,9 +82,6 @@
 
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 
-/* Command line configuration */
-#undef CONFIG_CMD_IMLS
-
 #define CONFIG_SYS_HZ			1000
 
 #define CONFIG_HWCONFIG

include/configs/ls1021aiot.h

@@ -215,10 +215,6 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT)
-#undef	CONFIG_CMD_IMLS
-#endif
-
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LAYERSCAPE_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR		0x01ee0200

include/configs/ls1088aqds.h

@@ -35,7 +35,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
 
-#undef CONFIG_CMD_IMLS
 #define CONFIG_SYS_CLK_FREQ		100000000
 #define CONFIG_DDR_CLK_FREQ		100000000
 #else

include/configs/ls1088ardb.h

@@ -26,7 +26,6 @@
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_QIXIS_I2C_ACCESS
 #define SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #endif
 
 #define CONFIG_SYS_CLK_FREQ		100000000