powerpc/t1040: enable PBL tool for T1040

Use a default RCW of protocol 0x66.
A PBI configure file which uses CPC as 256KB SRAM. It can be used by
PBL tool on T1040 to build a pbl boot image.

Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>

board/freescale/t1040qds/t1040_pbi.cfg

+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#Configure CPC1 as 512KB SRAM
+09010100 00000000
+09010104 fffc0007
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000cf0 00000000
+09000cf4 fffc0000
+09000cf8 81000011
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Configure SPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000

board/freescale/t1040qds/t1040_rcw.cfg

+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x66
+0a10000c 0c000000 00000000 00000000
+66000002 00000000 fc027000 01000000
+00000000 00000000 00000000 00030810
+00000000 03fc500f 00000000 00000000

include/configs/T1040QDS.h

@@ -32,6 +32,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t1040qds/t1040_rcw.cfg
 #endif
 
 /* High Level Configuration Options */