board/BuR: split bur_am335x_common.h into am335x-specific and BuR common parts

bur_am335x_common.h today holds all common configuration which is shared
over all B&R boards.

In future we want to bring up boards which are not based on AM335x only
but we still want to have common configuration over all B&R boards
independent from their architecture.

To prepare this we introduce a new file "bur_cfg_common.h", where we
move all common things, which are not architecture specific, from
bur_am335x_common.h.

On B&R am335x boards we include from now:

#include <configs/bur_cfg_common.h>
#include <configs/bur_am335x_common.h>

On other B&R boards, we include only
#include <configs/bur_cfg_common.h>

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Reviewed-by: Tom Rini <trini@konsulko.com>

include/configs/bur_am335x_common.h

@@ -3,7 +3,7 @@
  *
  * common parts used by B&R AM335x based boards
  *
- * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
  * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
  *
  * SPDX-License-Identifier:        GPL-2.0+
@@ -12,24 +12,9 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
-#define BUR_COMMON_ENV \
-"usbscript=usb start && fatload usb 0 0x80000000 usbscript.img && source\0" \
-"brdefaultip=if test -r ${ipaddr}; then; else" \
-" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
-" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
-"netconsole=echo switching to network console ...; " \
-"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
-"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
-"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
-"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
-
-#define CONFIG_PREBOOT			"run brdefaultip"
-
-
 #define CONFIG_AM33XX
 #define CONFIG_OMAP
 #define CONFIG_OMAP_COMMON
-#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_CACHELINE_SIZE	64
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
@@ -52,17 +37,11 @@
 #define CONFIG_BAUDRATE			115200
 
 /* Network defines */
-#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT		2
 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_NATSEMI
-/* Network console */
-#define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
+
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -103,38 +82,6 @@
 #define CONFIG_SYS_I2C_OMAP24XX
 /* GPIO */
 #define CONFIG_OMAP_GPIO
-/*
- * ----------------------------------------------------------------------------
- * The following are general good-enough settings for U-Boot.  We set a
- * large malloc pool as we generally have a lot of DDR, and we opt for
- * function over binary size in the main portion of U-Boot as this is
- * generally easily constrained later if needed.  We enable the config
- * options that give us information in the environment about what board
- * we are on so we do not need to rely on the command prompt.  We set a
- * console baudrate of 115200 and use the default baud rate table.
- */
-#define CONFIG_SYS_MALLOC_LEN		(5120 << 10)
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-
-/* As stated above, the following choices are optional. */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-
-/* We set the max number of command args high to avoid HUSH bugs. */
-#define CONFIG_SYS_MAXARGS		64
-
-/* Console I/O Buffer Size */
-#define CONFIG_SYS_CBSIZE		512
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +\
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
 /*
  * Our platforms make use of SPL to initalize the hardware (primarily

include/configs/bur_cfg_common.h

+/*
+ * bur_cfg_common.h
+ *
+ * common parts used over all B&R boards
+ *
+ * Copyright (C) 2016 Hannes Schmelzer <oe5hpm@oevsv.at> -
+ * Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
+ *
+ * SPDX-License-Identifier:        GPL-2.0+
+ */
+
+#ifndef __BUR_CFG_COMMON_H__
+#define __BUR_CFG_COMMON_H__
+/* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"usbscript=usb start && fatload usb 0 ${scradr} usbscript.img &&" \
+" source ${scradr}\0" \
+"brdefaultip=if test -r ${ipaddr}; then; else" \
+" setenv ipaddr 192.168.60.1; setenv serverip 192.168.60.254;" \
+" setenv gatewayip 192.168.60.254; setenv netmask 255.255.255.0; fi;\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then; else run brdefaultip; fi; setenv ncip ${serverip}; " \
+"setcurs 1 9; lcdputs myip; setcurs 10 9; lcdputs ${ipaddr};" \
+"setcurs 1 10;lcdputs serverip; setcurs 10 10; lcdputs ${serverip};" \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_PREBOOT			"run cfgscr; run brdefaultip"
+
+#define CONFIG_BOARD_LATE_INIT
+
+/* Network defines */
+#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_NET_RETRY_COUNT		2
+
+/* Network console */
+#define CONFIG_NETCONSOLE		1
+#define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+
+/* As stated above, the following choices are optional. */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_VERSION_VARIABLE
+
+/* We set the max number of command args high to avoid HUSH bugs. */
+#define CONFIG_SYS_MAXARGS		64
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		512
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE +\
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#endif	/* __BUR_CFG_COMMON_H__ */

include/configs/kwb.h

@@ -12,6 +12,7 @@
 #ifndef __CONFIG_KWB_H__
 #define __CONFIG_KWB_H__
 
+#include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
 /* ------------------------------------------------------------------------- */
 #define CONFIG_AM335X_LCD
@@ -27,6 +28,9 @@
 #define CONFIG_BMP_24BMP
 #define CONFIG_BMP_32BPP
 
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
+
 /* Clock Defines */
 #define V_OSCK				26000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)

include/configs/tseries.h

@@ -12,6 +12,7 @@
 #ifndef __CONFIG_TSERIES_H__
 #define __CONFIG_TSERIES_H__
 
+#include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
 /* ------------------------------------------------------------------------- */
 #define CONFIG_AM335X_LCD
@@ -30,6 +31,10 @@
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0x44E3E000
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_BOOTCOUNT_AM33XX
+
+/* memory */
+#define CONFIG_SYS_MALLOC_LEN		(5 * 1024 * 1024)
+
 /* Clock Defines */
 #define V_OSCK				26000000  /* Clock output from T2 */
 #define V_SCLK				(V_OSCK)