Skip to content
Snippets Groups Projects
Commit 348dbf43 authored by Michal Simek's avatar Michal Simek
Browse files

arm64: zynqmp: Remove ep108 board 


ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.

Signed-off-by: default avatarMichal Simek <michal.simek@xilinx.com>
parent 83bf2ff0
No related branches found
No related tags found
No related merge requests found
Hide whitespace changes
Inline Side-by-side
arch/arm/dts/Makefile
+ 0
− 1
View file @ 348dbf43
......@@ -146,7 +146,6 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
zynq-zturn-myir.dtb \
zynq-zybo.dtb
dtb-$(CONFIG_ARCH_ZYNQMP) += \
zynqmp-ep108.dtb \
zynqmp-mini-emmc.dtb \
zynqmp-mini-nand.dtb \
zynqmp-zcu102-revA.dtb \
......
arch/arm/dts/zynqmp-ep108-clk.dtsi deleted 100644 → 0
+ 0
− 172
View file @ 83bf2ff0
/*
* clock specification for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/ {
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
u-boot,dm-pre-reloc;
};
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <111111111>;
};
sata_clk: sata_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <75000000>;
};
dp_aclk: clock0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
clock-accuracy = <100>;
};
clk100: clk100 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
clk600: clk600 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <600000000>;
};
dp_aud_clk: clock1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22579200>;
clock-accuracy = <100>;
};
};
&can0 {
clocks = <&misc_clk &misc_clk>;
};
&can1 {
clocks = <&misc_clk &misc_clk>;
};
&fpd_dma_chan1 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan2 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan3 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan4 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan5 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan6 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan7 {
clocks = <&clk600>, <&clk100>;
};
&fpd_dma_chan8 {
clocks = <&clk600>, <&clk100>;
};
&gem0 {
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
};
&gpio {
clocks = <&misc_clk>;
};
&i2c0 {
clocks = <&i2c_clk>;
};
&i2c1 {
clocks = <&i2c_clk>;
};
&nand0 {
clocks = <&misc_clk &misc_clk>;
};
&qspi {
clocks = <&misc_clk &misc_clk>;
};
&sata {
clocks = <&sata_clk>;
};
&sdhci0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&sdhci1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&spi0 {
clocks = <&misc_clk &misc_clk>;
};
&spi1 {
clocks = <&misc_clk &misc_clk>;
};
&uart0 {
clocks = <&misc_clk &misc_clk>;
};
&usb0 {
clocks = <&misc_clk>, <&misc_clk>;
};
&usb1 {
clocks = <&misc_clk>, <&misc_clk>;
};
&watchdog0 {
clocks= <&misc_clk>;
};
&xilinx_drm {
clocks = <&misc_clk>;
};
&xlnx_dp {
clocks = <&dp_aclk>, <&dp_aud_clk>;
};
&xlnx_dp_snd_codec0 {
clocks = <&dp_aud_clk>;
};
&xlnx_dpdma {
clocks = <&misc_clk>;
};
arch/arm/dts/zynqmp-ep108.dts deleted 100644 → 0
+ 0
− 235
View file @ 83bf2ff0
/*
* dts file for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2014 - 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "zynqmp.dtsi"
#include "zynqmp-ep108-clk.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
ethernet0 = &gem0;
mmc0 = &sdhci0;
mmc1 = &sdhci1;
serial0 = &uart0;
spi0 = &qspi;
spi1 = &spi0;
spi2 = &spi1;
usb0 = &usb0;
usb1 = &usb1;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
};
&can0 {
status = "okay";
};
&can1 {
status = "okay";
};
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: phy@0 {
reg = <0>;
max-speed = <100>;
};
};
&gpio {
status = "okay";
};
&i2c0 {
status = "okay";
clock-frequency = <400000>;
eeprom@54 {
compatible = "atmel,24c64";
reg = <0x54>;
};
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
eeprom@55 {
compatible = "atmel,24c64";
reg = <0x55>;
};
};
&nand0 {
status = "okay";
arasan,has-mdma;
num-cs = <1>;
partition@0 { /* for testing purpose */
label = "nand-fsbl-uboot";
reg = <0x0 0x0 0x400000>;
};
partition@1 { /* for testing purpose */
label = "nand-linux";
reg = <0x0 0x400000 0x1400000>;
};
partition@2 { /* for testing purpose */
label = "nand-device-tree";
reg = <0x0 0x1800000 0x400000>;
};
partition@3 { /* for testing purpose */
label = "nand-rootfs";
reg = <0x0 0x1C00000 0x1400000>;
};
partition@4 { /* for testing purpose */
label = "nand-bitstream";
reg = <0x0 0x3000000 0x400000>;
};
partition@5 { /* for testing purpose */
label = "nand-misc";
reg = <0x0 0x3400000 0xFCC00000>;
};
};
&qspi {
status = "okay";
flash@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <10000000>;
partition@qspi-fsbl-uboot { /* for testing purpose */
label = "qspi-fsbl-uboot";
reg = <0x0 0x100000>;
};
partition@qspi-linux { /* for testing purpose */
label = "qspi-linux";
reg = <0x100000 0x500000>;
};
partition@qspi-device-tree { /* for testing purpose */
label = "qspi-device-tree";
reg = <0x600000 0x20000>;
};
partition@qspi-rootfs { /* for testing purpose */
label = "qspi-rootfs";
reg = <0x620000 0x5E0000>;
};
};
};
&sata {
status = "okay";
ceva,broken-gen2;
/* SATA Phy OOB timing settings */
ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
};
&sdhci0 {
status = "okay";
bus-width = <8>;
xlnx,mio_bank = <2>;
};
&sdhci1 {
status = "okay";
xlnx,mio_bank = <1>;
};
&spi0 {
status = "okay";
num-cs = <1>;
spi0_flash0: spi0_flash0@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
spi0_flash0@0 {
label = "spi0_flash0";
reg = <0x0 0x100000>;
};
};
};
&spi1 {
status = "okay";
num-cs = <1>;
spi1_flash0: spi1_flash0@0 {
compatible = "m25p80";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
spi1_flash0@0 {
label = "spi1_flash0";
reg = <0x0 0x100000>;
};
};
};
&uart0 {
status = "okay";
};
&usb0 {
status = "okay";
};
&dwc3_0 {
status = "okay";
dr_mode = "peripheral";
maximum-speed = "high-speed";
};
&usb1 {
status = "okay";
};
&dwc3_1 {
status = "okay";
dr_mode = "host";
maximum-speed = "high-speed";
};
&watchdog0 {
status = "okay";
};
&xlnx_dp {
xlnx,max-pclock-frequency = <200000>;
};
&xlnx_dpdma {
xlnx,axi-clock-freq = <200000000>;
};
configs/xilinx_zynqmp_ep_defconfig deleted 100644 → 0
+ 0
− 102
View file @ 83bf2ff0
CONFIG_ARM=y
CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep"
CONFIG_ARCH_ZYNQMP=y
CONFIG_SYS_TEXT_BASE=0x8000000
CONFIG_SYS_MALLOC_F_LEN=0x8000
CONFIG_SPL=y
CONFIG_ZYNQ_SDHCI_MAX_FREQ=52000000
CONFIG_ZYNQMP_USB=y
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108"
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_PROMPT="ZynqMP> "
CONFIG_FASTBOOT=y
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_THOR_DOWNLOAD=y
# CONFIG_CMD_EDITENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
CONFIG_CMD_CLK=y
CONFIG_CMD_DFU=y
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND_LOCK_UNLOCK=y
CONFIG_CMD_USB=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_TIME=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_ISO_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_EMBED=y
CONFIG_ENV_IS_IN_FAT=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SCSI_AHCI=y
CONFIG_SATA_CEVA=y
CONFIG_DFU_RAM=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_ZYNQMPPL=y
CONFIG_DM_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_CADENCE=y
CONFIG_MISC=y
CONFIG_DM_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_ZYNQ=y
CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000
CONFIG_NAND=y
CONFIG_NAND_ARASAN=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_WINBOND=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHY_MARVELL=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_REALTEK=y
CONFIG_PHY_TI=y
CONFIG_PHY_VITESSE=y
CONFIG_DM_ETH=y
CONFIG_PHY_GIGE=y
CONFIG_ZYNQ_GEM=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_DEBUG_UART_ZYNQ=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=25000000
CONFIG_DEBUG_UART_ANNOUNCE=y
CONFIG_ZYNQ_SERIAL=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_XHCI_ZYNQMP=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Xilinx"
CONFIG_USB_GADGET_VENDOR_NUM=0x03fd
CONFIG_USB_GADGET_PRODUCT_NUM=0x0300
CONFIG_USB_FUNCTION_THOR=y
# CONFIG_REGEX is not set
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
include/configs/xilinx_zynqmp_ep.h deleted 100644 → 0
+ 0
− 24
View file @ 83bf2ff0
/*
* Configuration for Xilinx ZynqMP emulation platforms
*
* (C) Copyright 2014 - 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
* Siva Durga Prasad Paladugu <sivadur@xilinx.com>
*
* Based on Configuration for Versatile Express
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_ZYNQMP_EP_H
#define __CONFIG_ZYNQMP_EP_H
#define CONFIG_ZYNQ_EEPROM
#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \
ZYNQMP_USB1_XHCI_BASEADDR}
#define COUNTER_FREQUENCY 4000000
#include <configs/xilinx_zynqmp.h>
#endif /* __CONFIG_ZYNQMP_EP_H */
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment