cmd: add sdp command

Add a new command to start USB Serial Download Protocol (SDP)
state machine.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Stefano Babic <sbabic@denx.de>

cmd/Kconfig

@@ -895,6 +895,13 @@ config CMD_USB
 	help
 	  USB support.
 
+config CMD_USB_SDP
+	bool "sdp"
+	select USB_FUNCTION_SDP
+	help
+	  Enables the command "sdp" which is used to have U-Boot emulating the
+	  Serial Download Protocol (SDP) via USB.
+
 config CMD_USB_MASS_STORAGE
 	bool "UMS usb mass storage"
 	help

cmd/Makefile

@@ -132,6 +132,7 @@ obj-$(CONFIG_CMD_FASTBOOT) += fastboot.o
 obj-$(CONFIG_CMD_FS_UUID) += fs_uuid.o
 
 obj-$(CONFIG_CMD_USB_MASS_STORAGE) += usb_mass_storage.o
+obj-$(CONFIG_CMD_USB_SDP) += usb_gadget_sdp.o
 obj-$(CONFIG_CMD_THOR_DOWNLOAD) += thordown.o
 obj-$(CONFIG_CMD_XIMG) += ximg.o
 obj-$(CONFIG_CMD_YAFFS2) += yaffs2.o

cmd/usb_gadget_sdp.c

+/*
+ * cmd_sdp.c -- sdp command
+ *
+ * Copyright (C) 2016 Toradex
+ * Author: Stefan Agner <stefan.agner@toradex.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <g_dnl.h>
+#include <sdp.h>
+#include <usb.h>
+
+static int do_sdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int ret = CMD_RET_FAILURE;
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	char *usb_controller = argv[1];
+	int controller_index = simple_strtoul(usb_controller, NULL, 0);
+	board_usb_init(controller_index, USB_INIT_DEVICE);
+
+	g_dnl_clear_detach();
+	g_dnl_register("usb_dnl_sdp");
+
+	ret = sdp_init(controller_index);
+	if (ret) {
+		error("SDP init failed: %d", ret);
+		goto exit;
+	}
+
+	/* This command typically does not return but jumps to an image */
+	sdp_handle(controller_index);
+	error("SDP ended");
+
+exit:
+	g_dnl_unregister();
+	board_usb_cleanup(controller_index, USB_INIT_DEVICE);
+
+	return ret;
+}
+
+U_BOOT_CMD(sdp, 2, 1, do_sdp,
+	"Serial Downloader Protocol",
+	"<USB_controller>\n"
+	"  - serial downloader protocol via <USB_controller>\n"
+);