h: initial addtion, Boundary Devices board

Includes hsolo1g and hquad2g
h.h: CONFIG_IPUV3_CLK 264000000
h: setup_dispay is done in fbpanel
h: add CONFIG_CMD_GPIO
h: explicit fbp_detect_i2c
h: verify port in board_ehci_hcd_init
h: use boundary.h
h: setup rgb_gpio_pads in board_early_init_f
h: add CONFIG_SPI_FLASH_SPANSION
h: hquad2g_defconfig add CONFIG_BLOCK_CACHE
hsolo1g: hsolo1g_defconfig add CONFIG_BLOCK_CACHE
h: use common code for eth init
h: eth.c now in common directory
h: move misc_init_r/do_kbd to common
h: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common
h: use common 1066mhz_4x256mx16.cfg
h: add  CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs
h: use common ddr scripts
h: port to v2018.07

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

h: update to v2017.01
h: update to v2017.03

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>

arch/arm/mach-imx/mx6/Kconfig

@@ -401,6 +401,9 @@ config TARGET_DASH
 config TARGET_EO
 	bool "eo"
 
+config TARGET_H
+	bool "h"
+
 config TARGET_NITROGEN6X
 	bool "nitrogen6x"
 	imply USB_HOST_ETHER
@@ -557,6 +560,7 @@ source "board/boundary/cob/Kconfig"
 source "board/boundary/cob2/Kconfig"
 source "board/boundary/dash/Kconfig"
 source "board/boundary/eo/Kconfig"
+source "board/boundary/h/Kconfig"
 source "board/boundary/nitrogen6x/Kconfig"
 source "board/boundary/ys/Kconfig"
 source "board/bticino/mamoj/Kconfig"

board/boundary/h/6x_bootscript.txt

+setenv bootargs enable_wait_mode=off ldb=sep0
+setenv nextcon 0;
+setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+setenv nextcon 1
+setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,INNOLUX-WVGA,if=RGB666
+setenv nextcon 2
+setenv fbmem "fbmem=28M,10M";
+
+while test "4" -ne $nextcon ; do
+	setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+	setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs $fbmem
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0
+${fs}load ${dtype} ${disk}:1 10800000 /boot/uImage
+&& ${fs}load ${dtype} ${disk}:1 12800000 /boot/uramdisk.img
+&& bootm 10800000 12800000 ;
+echo "Error loading kernel image"

board/boundary/h/Kconfig

+if TARGET_H
+
+config SYS_CPU
+	default "armv7"
+
+config SYS_BOARD
+	default "h"
+
+config SYS_VENDOR
+	default "boundary"
+
+config SYS_SOC
+	default "mx6"
+
+config SYS_CONFIG_NAME
+	default "h"
+
+source "board/boundary/common/Kconfig"
+
+endif

board/boundary/h/MAINTAINERS

+H BOARD
+M:	Troy Kisky <troy.kisky@boundarydevices.com>
+S:	Maintained
+F:	board/boundary/h/
+F:	include/configs/h.h
+F:	configs/hsolo1g_defconfig
+F:	configs/hquad2g_defconfig
+

board/boundary/h/Makefile

+#
+# Copyright (C) 2012-2013, Guennadi Liakhovetski <lg@denx.de>
+# (C) Copyright 2012-2013 Freescale Semiconductor, Inc.
+# Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y  := h.o

board/boundary/h/h.c

+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <malloc.h>
+#include <asm/arch/mx6-pins.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/fbpanel.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/sata.h>
+#include <asm/mach-imx/spi.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <i2c.h>
+#include <input.h>
+#include <usb/ehci-ci.h>
+#include "../common/bd_common.h"
+#include "../common/padctrl.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |	       \
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |	       \
+	PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |	       \
+	PAD_CTL_PUS_47K_UP  | PAD_CTL_SPEED_LOW |	       \
+	PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
+
+#define RGB_PAD_CTRL	PAD_CTL_DSE_120ohm
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS |				\
+	PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm     | PAD_CTL_SRE_FAST)
+
+#define I2C_PAD_CTRL	(PAD_CTL_PKE | PAD_CTL_PUE |		\
+	PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |		\
+	PAD_CTL_DSE_40ohm | PAD_CTL_HYS |			\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+/*
+ *
+ */
+static const iomux_v3_cfg_t init_pads[] = {
+	/* ECSPI1 pads */
+	IOMUX_PAD_CTRL(EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
+	IOMUX_PAD_CTRL(EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
+	IOMUX_PAD_CTRL(EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
+#define GP_ECSPI1_NOR_CS		IMX_GPIO_NR(3, 19)
+	IOMUX_PAD_CTRL(EIM_D19__GPIO3_IO19, SPI_PAD_CTRL),
+
+	/* ENET pads that don't change for PHY reset */
+	IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, PAD_CTRL_ENET_MDIO),
+	IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, PAD_CTRL_ENET_MDC),
+	IOMUX_PAD_CTRL(RGMII_TXC__RGMII_TXC, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(RGMII_TD0__RGMII_TD0, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(RGMII_TD1__RGMII_TD1, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(RGMII_TD2__RGMII_TD2, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(RGMII_TD3__RGMII_TD3, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(RGMII_TX_CTL__RGMII_TX_CTL, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(ENET_REF_CLK__ENET_TX_CLK, PAD_CTRL_ENET_TX),
+	IOMUX_PAD_CTRL(EIM_D23__GPIO3_IO23, WEAK_PULLUP),
+	/* pin 42 PHY nRST */
+#define GP_RGMII_PHY_RESET		IMX_GPIO_NR(1, 27)
+	IOMUX_PAD_CTRL(ENET_RXD0__GPIO1_IO27, WEAK_PULLUP),
+
+	/* i2c mux pads */
+#define GP_I2C_EN_MIPI		IMX_GPIO_NR(2, 16)
+	IOMUX_PAD_CTRL(EIM_A22__GPIO2_IO16, WEAK_PULLDN),	/* mipi I2C enable */
+#define GP_I2C_EN_LVDS0		IMX_GPIO_NR(2, 21)
+	IOMUX_PAD_CTRL(EIM_A17__GPIO2_IO21, WEAK_PULLDN),	/* LVDS0 I2C enable */
+#define GP_I2C_EN_LVDS1		IMX_GPIO_NR(2, 22)
+	IOMUX_PAD_CTRL(EIM_A16__GPIO2_IO22, WEAK_PULLDN),	/* LVDS1 I2C enable */
+#define GP_I2C_EN_RTC		IMX_GPIO_NR(2, 23)
+	IOMUX_PAD_CTRL(EIM_CS0__GPIO2_IO23, WEAK_PULLDN),	/* RTC I2C enable */
+#define GP_I2C_EN_AR1020	IMX_GPIO_NR(7, 13)
+	IOMUX_PAD_CTRL(GPIO_18__GPIO7_IO13, WEAK_PULLDN),	/* AR1020 I2C enable */
+
+	/* Broadcom bcm4330 pads */
+#define GP_WL_EN		IMX_GPIO_NR(6, 7)	/* NANDF_CLE - active high */
+        IOMUX_PAD_CTRL(NANDF_CLE__GPIO6_IO07, OUTPUT_40OHM),	/* wlan regulator enable */
+#define GP_WL_WAKE_IRQ		IMX_GPIO_NR(6, 14)	/* NANDF_CS1 - active low */
+	IOMUX_PAD_CTRL(NANDF_CS1__GPIO6_IO14, WEAK_PULLDN),	/* wlan wake irq */
+#define GP_WL_BT_REG_EN		IMX_GPIO_NR(6, 15)	/* NANDF_CS2 - active high */
+	IOMUX_PAD_CTRL(NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM),	/* bt regulator enable */
+#define GP_WL_BT_WAKE_IRQ	IMX_GPIO_NR(6, 16)	/* NANDF_CS3 - active low */
+	IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM),	/* bt wake irq */
+	IOMUX_PAD_CTRL(NANDF_D2__GPIO2_IO02, OUTPUT_40OHM),		/* bt wake */
+#define GP_WL_BT_RESET		IMX_GPIO_NR(6, 8)	/* NANDF_ALE - active low */
+	IOMUX_PAD_CTRL(NANDF_ALE__GPIO6_IO08, OUTPUT_40OHM),	/* bt reset */
+#define GP_WL_CLK_REQ_IRQ	IMX_GPIO_NR(6, 9)	/* NANDF_WP_B - active low */
+
+#define GP_RGB_BACKLIGHT_PWM		IMX_GPIO_NR(1, 21)
+	IOMUX_PAD_CTRL(SD1_DAT3__GPIO1_IO21, WEAK_PULLDN),
+#define GP_LVDS0_BACKLIGHT_PWM		IMX_GPIO_NR(1, 18)
+	IOMUX_PAD_CTRL(SD1_CMD__GPIO1_IO18, WEAK_PULLDN),
+#define GP_LVDS1_BACKLIGHT_PWM		IMX_GPIO_NR(1, 17)
+	IOMUX_PAD_CTRL(SD1_DAT1__GPIO1_IO17, WEAK_PULLDN),
+#define GP_RGB_MIRROR_H			IMX_GPIO_NR(2, 25)
+	IOMUX_PAD_CTRL(EIM_OE__GPIO2_IO25, WEAK_PULLUP),	/* DI0 display left/right mirror */
+#define GP_RGB_MIRROR_V			IMX_GPIO_NR(2, 27)
+	IOMUX_PAD_CTRL(EIM_LBA__GPIO2_IO27, WEAK_PULLUP),	/* DI0 display up/down mirror */
+#define GP_LVDS0_12V_5V_BL_SELECT	IMX_GPIO_NR(4, 5)
+	IOMUX_PAD_CTRL(GPIO_19__GPIO4_IO05, WEAK_PULLDN),	/* LVDS0 12v/5v select, 0 - 5v, 1 - 12v */
+#define GP_RGB_LVDS1_12V_5V_BL_SELECT	IMX_GPIO_NR(1, 7)
+	IOMUX_PAD_CTRL(GPIO_7__GPIO1_IO07, WEAK_PULLDN),	/* rgb/LVDS1 12v/5v select, 0 - 5v, 1 - 12v */
+#define GP_12V_POWER_EN			IMX_GPIO_NR(4, 20)
+	IOMUX_PAD_CTRL(DI0_PIN4__GPIO4_IO20, WEAK_PULLDN),	/* 12v power enable */
+
+	/* UART1 */
+	IOMUX_PAD_CTRL(SD3_DAT6__UART1_RX_DATA, UART_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_DAT7__UART1_TX_DATA, UART_PAD_CTRL),
+
+	/* UART2 */
+	IOMUX_PAD_CTRL(EIM_D26__UART2_TX_DATA, UART_PAD_CTRL),
+	IOMUX_PAD_CTRL(EIM_D27__UART2_RX_DATA, UART_PAD_CTRL),
+
+	/* USB */
+#define GP_USB_HUB_RESET	IMX_GPIO_NR(7, 12)
+	IOMUX_PAD_CTRL(GPIO_17__GPIO7_IO12, WEAK_PULLUP),	/* Hub reset */
+	IOMUX_PAD_CTRL(GPIO_1__USB_OTG_ID, USDHC_PAD_CTRL), /* USBOTG ID pin */
+	IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, WEAK_PULLUP),	/* usbotg power */
+	IOMUX_PAD_CTRL(KEY_COL4__USB_OTG_OC, WEAK_PULLUP),	/* USBOTG OC pin */
+	IOMUX_PAD_CTRL(EIM_RW__GPIO2_IO26, WEAK_PULLUP),	/* Rev1 usb power */
+	IOMUX_PAD_CTRL(EIM_D20__GPIO3_IO20, WEAK_PULLUP),	/* Rev1 usb power */
+	IOMUX_PAD_CTRL(EIM_A25__GPIO5_IO02, WEAK_PULLUP),	/* Rev1 usb power */
+
+	/* USDHC3 - sdcard */
+	IOMUX_PAD_CTRL(SD3_CLK__SD3_CLK, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_CMD__SD3_CMD, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL),
+#define GP_USDHC3_CD		IMX_GPIO_NR(7, 0)
+	IOMUX_PAD_CTRL(SD3_DAT5__GPIO7_IO00, WEAK_PULLUP), /* CD */
+
+	/* USDHC4  */
+	IOMUX_PAD_CTRL(SD4_CLK__SD4_CLK, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD4_CMD__SD4_CMD, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD4_DAT0__SD4_DATA0, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD4_DAT1__SD4_DATA1, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD4_DAT2__SD4_DATA2, USDHC_PAD_CTRL),
+	IOMUX_PAD_CTRL(SD4_DAT3__SD4_DATA3, USDHC_PAD_CTRL),
+#define GP_USDHC4_CD		IMX_GPIO_NR(2, 6)
+	IOMUX_PAD_CTRL(NANDF_D6__GPIO2_IO06, WEAK_PULLUP), /* CD */
+};
+
+#ifdef CONFIG_CMD_FBPANEL
+static const iomux_v3_cfg_t rgb_pads[] = {
+	IOMUX_PAD_CTRL(DI0_DISP_CLK__IPU1_DI0_DISP_CLK, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DI0_PIN15__IPU1_DI0_PIN15, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DI0_PIN2__IPU1_DI0_PIN02, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DI0_PIN3__IPU1_DI0_PIN03, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT0__IPU1_DISP0_DATA00, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT1__IPU1_DISP0_DATA01, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT2__IPU1_DISP0_DATA02, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT3__IPU1_DISP0_DATA03, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT4__IPU1_DISP0_DATA04, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT5__IPU1_DISP0_DATA05, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT6__IPU1_DISP0_DATA06, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT7__IPU1_DISP0_DATA07, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT8__IPU1_DISP0_DATA08, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT9__IPU1_DISP0_DATA09, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT10__IPU1_DISP0_DATA10, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT11__IPU1_DISP0_DATA11, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT12__IPU1_DISP0_DATA12, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT13__IPU1_DISP0_DATA13, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT14__IPU1_DISP0_DATA14, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT15__IPU1_DISP0_DATA15, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT16__IPU1_DISP0_DATA16, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT17__IPU1_DISP0_DATA17, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT18__IPU1_DISP0_DATA18, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT19__IPU1_DISP0_DATA19, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT20__IPU1_DISP0_DATA20, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT21__IPU1_DISP0_DATA21, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT22__IPU1_DISP0_DATA22, RGB_PAD_CTRL),
+	IOMUX_PAD_CTRL(DISP0_DAT23__IPU1_DISP0_DATA23, RGB_PAD_CTRL),
+};
+#endif
+
+static const iomux_v3_cfg_t rgb_gpio_pads[] = {
+	IOMUX_PAD_CTRL(DI0_DISP_CLK__GPIO4_IO16, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DI0_PIN15__GPIO4_IO17, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DI0_PIN2__GPIO4_IO18, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DI0_PIN3__GPIO4_IO19, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DI0_PIN4__GPIO4_IO20, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT0__GPIO4_IO21, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT1__GPIO4_IO22, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT2__GPIO4_IO23, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT3__GPIO4_IO24, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT4__GPIO4_IO25, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT5__GPIO4_IO26, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT6__GPIO4_IO27, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT7__GPIO4_IO28, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT8__GPIO4_IO29, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT9__GPIO4_IO30, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT10__GPIO4_IO31, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT11__GPIO5_IO05, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT12__GPIO5_IO06, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT13__GPIO5_IO07, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT14__GPIO5_IO08, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT15__GPIO5_IO09, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT16__GPIO5_IO10, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT17__GPIO5_IO11, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT18__GPIO5_IO12, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT19__GPIO5_IO13, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT20__GPIO5_IO14, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT21__GPIO5_IO15, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT22__GPIO5_IO16, WEAK_PULLUP),
+	IOMUX_PAD_CTRL(DISP0_DAT23__GPIO5_IO17, WEAK_PULLUP),
+};
+
+static const struct i2c_pads_info i2c_pads[] = {
+	/* I2C1, SGTL5000 */
+	I2C_PADS_INFO_ENTRY(I2C1, EIM_D21, 3, 21, EIM_D28, 3, 28, I2C_PAD_CTRL),
+	/* I2C3, J15 - RGB connector */
+	I2C_PADS_INFO_ENTRY(I2C3, GPIO_5, 1, 05, GPIO_16, 7, 11, I2C_PAD_CTRL),
+};
+#define I2C_BUS_CNT	2
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+	if (port) {
+		/* Reset USB hub */
+		gpio_direction_output(GP_USB_HUB_RESET, 0);
+		mdelay(2);
+		gpio_set_value(GP_USB_HUB_RESET, 1);
+	}
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg board_usdhc_cfg[] = {
+	{.esdhc_base = USDHC3_BASE_ADDR, .bus_width = 4,
+			.gp_cd = GP_USDHC3_CD},
+	{.esdhc_base = USDHC4_BASE_ADDR, .bus_width = 8,
+			.gp_cd = GP_USDHC4_CD},
+};
+#endif
+
+#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+	return (bus == 0 && cs == 0) ? GP_ECSPI1_NOR_CS : -1;
+}
+#endif
+
+#ifdef CONFIG_CMD_FBPANEL
+void board_enable_lcd(const struct display_info_t *di, int enable)
+{
+	if (enable)
+		SETUP_IOMUX_PADS(rgb_pads);
+	else
+		SETUP_IOMUX_PADS(rgb_gpio_pads);
+	gpio_direction_output(GP_RGB_BACKLIGHT_PWM, enable);
+}
+
+void board_enable_lvds(const struct display_info_t *di, int enable)
+{
+	gpio_direction_output(GP_LVDS0_BACKLIGHT_PWM, enable);
+	gpio_direction_output(GP_LVDS1_BACKLIGHT_PWM, enable ^ 1);
+}
+
+void board_enable_lvds2(const struct display_info_t *di, int enable)
+{
+	gpio_direction_output(GP_LVDS0_BACKLIGHT_PWM, enable ^ 1);
+	gpio_direction_output(GP_LVDS1_BACKLIGHT_PWM, enable);
+}
+
+static const struct display_info_t displays[] = {
+	VD_1024_600(LVDS, fbp_detect_i2c, 2, 0x04),
+	VD_INNOLUX_WVGA(LVDS2, fbp_detect_i2c, 2, 0x48),
+};
+#define display_cnt	ARRAY_SIZE(displays)
+#else
+#define displays	NULL
+#define display_cnt	0
+#endif
+
+static const unsigned short gpios_out_low[] = {
+	GP_RGMII_PHY_RESET,
+	/* Disable wl1271 */
+	GP_WL_EN,
+	GP_WL_BT_REG_EN,
+	GP_WL_BT_RESET,
+	GP_RGB_MIRROR_V,
+	GP_LVDS0_12V_5V_BL_SELECT,
+	GP_RGB_LVDS1_12V_5V_BL_SELECT,
+	GP_12V_POWER_EN,
+	GP_I2C_EN_MIPI,
+	GP_I2C_EN_LVDS0,
+	GP_I2C_EN_LVDS1,
+	GP_I2C_EN_RTC,
+	GP_I2C_EN_AR1020,
+};
+
+static const unsigned short gpios_out_high[] = {
+	GP_ECSPI1_NOR_CS,
+	GP_RGB_MIRROR_H,
+};
+
+static const unsigned short gpios_in[] = {
+	GP_WL_WAKE_IRQ,
+	GP_WL_BT_WAKE_IRQ,
+	GP_WL_CLK_REQ_IRQ,
+	GP_RGB_BACKLIGHT_PWM,
+	GP_LVDS0_BACKLIGHT_PWM,
+	GP_LVDS1_BACKLIGHT_PWM,
+	GP_USDHC3_CD,
+	GP_USDHC4_CD,
+};
+
+int board_early_init_f(void)
+{
+	set_gpios_in(gpios_in, ARRAY_SIZE(gpios_in));
+	set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
+	set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
+	SETUP_IOMUX_PADS(init_pads);
+	SETUP_IOMUX_PADS(rgb_gpio_pads);
+	return 0;
+}
+
+int board_init(void)
+{
+	common_board_init(i2c_pads, I2C_BUS_CNT, IOMUXC_GPR1_OTG_ID_GPIO1,
+			displays, display_cnt, 0);
+	return 0;
+}
+
+const struct button_key board_buttons[] = {
+	{NULL, 0, 0, 0},
+};
+
+#ifdef CONFIG_CMD_BMODE
+const struct boot_mode board_boot_modes[] = {
+	/* 4 bit bus width */
+	{"mmc0",	MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+	{"mmc1",	MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
+	{NULL,		0},
+};
+#endif

board/boundary/h/hquad2g.cfg

+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* NC YET */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL	0x42740304
+#define MX6_MMDC_P0_MPDGCTRL1_VAL	0x026e0265
+#define MX6_MMDC_P1_MPDGCTRL0_VAL	0x02750306
+#define MX6_MMDC_P1_MPDGCTRL1_VAL	0x02720244
+#define MX6_MMDC_P0_MPRDDLCTL_VAL	0x463d4041
+#define MX6_MMDC_P1_MPRDDLCTL_VAL	0x42413c47
+#define MX6_MMDC_P0_MPWRDLCTL_VAL	0x37414441
+#define MX6_MMDC_P1_MPWRDLCTL_VAL	0x4633473b
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL	0x0025001f
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL	0x00290027
+#define MX6_MMDC_P1_MPWLDECTRL0_VAL	0x001f002b
+#define MX6_MMDC_P1_MPWLDECTRL1_VAL	0x000f0029
+#define WALAT	1
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 64
+/* BOM removed, not supported */
+#include "../common/mx6/1066mhz_256mx16.cfg"
+#include "../common/mx6/clocks.cfg"

board/boundary/h/hsolo1g.cfg

+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer docs/README.imxmage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM      spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* NC YET */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL	0x42350231
+#define MX6_MMDC_P0_MPDGCTRL1_VAL	0x021A0218
+#define MX6_MMDC_P0_MPRDDLCTL_VAL	0x4B4B4E49
+#define MX6_MMDC_P0_MPWRDLCTL_VAL	0x3F3F3035
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL	0x0040003C
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL	0x0032003E
+#define WALAT	1
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 32
+/* BOM removed, not supported */
+#include "../common/mx6/800mhz_256mx16.cfg"
+#include "../common/mx6/clocks.cfg"

configs/hquad2g_defconfig

+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_H=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/h/hquad2g.cfg,MX6Q,DDR_MB=2048,DEFCONFIG=\"hquad2g\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SATA=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DWC_AHSATA=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y

configs/hsolo1g_defconfig

+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_H=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/h/hsolo1g.cfg,MX6S,DDR_MB=1024,DEFCONFIG=\"hsolo1g\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SATA=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_DWC_AHSATA=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_PHY_MICREL_KSZ90X1=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y

include/configs/h.h

+/*
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the Boundary Devices H board.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+
+#define CONFIG_MACH_TYPE	3769
+
+#define CONFIG_VIDEO_LOGO
+
+#define CONFIG_ARP_TIMEOUT     200UL
+
+#define CONFIG_SYS_FSL_USDHC_NUM	2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define BD_I2C_MASK	7
+
+#include "boundary.h"
+#define CONFIG_EXTRA_ENV_SETTINGS BD_BOUNDARY_ENV_SETTINGS \
+	"disable_giga=1\0" \
+
+#endif	       /* __CONFIG_H */