arc: select cache settings via menuconfig

This change allows to keep board description clean and minimalistic.
This is especially helpful if one board may house different CPUs with
different features.

It is applicable to both FPGA-based boards or those that have CPUs
mounted on interchnagable daughter-boards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

arch/arc/Kconfig

@@ -47,6 +47,25 @@ config ARC_MMU_V3
 
 endchoice
 
+config SYS_ICACHE_OFF
+	bool "Do not use Instruction Cache"
+	default n
+
+config SYS_DCACHE_OFF
+	bool "Do not use Data Cache"
+	default n
+
+config ARC_CACHE_LINE_SHIFT
+	int "Cache Line Length (as power of 2)"
+	range 5 7
+	default "6"
+	depends on !SYS_DCACHE_OFF || !SYS_DCACHE_OFF
+	help
+	  Starting with ARC700 4.9, Cache line length is configurable,
+	  This option specifies "N", with Line-len = 2 power N
+	  So line lengths of 32, 64, 128 are specified by 5,6,7, respectively
+	  Linux only supports same line lengths for I and D caches.
+
 choice
 	prompt "Target select"
 

arch/arc/include/asm/cache.h

@@ -9,14 +9,11 @@
 
 #include <config.h>
 
-/*
- * The current upper bound for ARC L1 data cache line sizes is 128 bytes.
- * We use that value for aligning DMA buffers unless the board config has
- * specified an alternate cache line size.
- */
-#ifdef CONFIG_SYS_CACHELINE_SIZE
+#ifdef CONFIG_ARC_CACHE_LINE_SHIFT
+#define CONFIG_SYS_CACHELINE_SIZE	(1 << CONFIG_ARC_CACHE_LINE_SHIFT)
 #define ARCH_DMA_MINALIGN		CONFIG_SYS_CACHELINE_SIZE
 #else
+/* Satisfy users of ARCH_DMA_MINALIGN */
 #define ARCH_DMA_MINALIGN		128
 #endif
 

arch/arc/lib/cache.c

@@ -6,6 +6,7 @@
 
 #include <config.h>
 #include <asm/arcregs.h>
+#include <asm/cache.h>
 
 /* Bit values in IC_CTRL */
 #define IC_CTRL_CACHE_DISABLE	(1 << 0)

configs/axs101_defconfig

 CONFIG_ARC=y
 CONFIG_TARGET_AXS101=y
 CONFIG_SYS_CLK_FREQ=750000000
+CONFIG_ARC_CACHE_LINE_SHIFT=5
+CONFIG_SYS_DCACHE_OFF=y
\ No newline at end of file

configs/tb100_defconfig

 CONFIG_ARC=y
 CONFIG_TARGET_TB100=y
 CONFIG_SYS_CLK_FREQ=500000000
+CONFIG_ARC_CACHE_LINE_SHIFT=5

include/configs/arcangel4-be.h

@@ -11,7 +11,6 @@
  *  CPU configuration
  */
 #define CONFIG_SYS_BIG_ENDIAN
-#define CONFIG_SYS_CACHELINE_SIZE	64
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
 /*

include/configs/arcangel4.h

@@ -10,7 +10,6 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	64
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
 /*

include/configs/axs101.h

@@ -10,12 +10,8 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	32
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
-/* NAND controller DMA doesn't work correctly with D$ enabled */
-#define CONFIG_SYS_DCACHE_OFF
-
 /*
  * Board configuration
  */

include/configs/tb100.h

@@ -12,7 +12,6 @@
 /*
  *  CPU configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE	32
 #define CONFIG_SYS_TIMER_RATE		CONFIG_SYS_CLK_FREQ
 
 /*