pcie_imx: Add mx6solox support

Let PCI on mx6solox also be supported.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>

arch/arm/cpu/armv7/mx6/clock.c

@@ -599,6 +599,7 @@ int enable_pcie_clock(void)
 	struct anatop_regs *anatop_regs =
 		(struct anatop_regs *)ANATOP_BASE_ADDR;
 	struct mxc_ccm_reg *ccm_regs = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+	u32 lvds1_clk_sel;
 
 	/*
 	 * Here be dragons!
@@ -608,17 +609,25 @@ int enable_pcie_clock(void)
 	 * marked as ANATOP_MISC1 is actually documented in the PMU section
 	 * of the datasheet as PMU_MISC1.
 	 *
-	 * Switch LVDS clock source to SATA (0xb), disable clock INPUT and
-	 * enable clock OUTPUT. This is important for PCI express link that
-	 * is clocked from the i.MX6.
+	 * Switch LVDS clock source to SATA (0xb) on mx6q/dl or PCI (0xa) on
+	 * mx6sx, disable clock INPUT and enable clock OUTPUT. This is important
+	 * for PCI express link that is clocked from the i.MX6.
 	 */
 #define ANADIG_ANA_MISC1_LVDSCLK1_IBEN		(1 << 12)
 #define ANADIG_ANA_MISC1_LVDSCLK1_OBEN		(1 << 10)
 #define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK	0x0000001F
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF	0xa
+#define ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF	0xb
+
+	if (is_cpu_type(MXC_CPU_MX6SX))
+		lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_PCIE_REF;
+	else
+		lvds1_clk_sel = ANADIG_ANA_MISC1_LVDS1_CLK_SEL_SATA_REF;
+
 	clrsetbits_le32(&anatop_regs->ana_misc1,
 			ANADIG_ANA_MISC1_LVDSCLK1_IBEN |
 			ANADIG_ANA_MISC1_LVDS1_CLK_SEL_MASK,
-			ANADIG_ANA_MISC1_LVDSCLK1_OBEN | 0xb);
+			ANADIG_ANA_MISC1_LVDSCLK1_OBEN | lvds1_clk_sel);
 
 	/* PCIe reference clock sourced from AXI. */
 	clrbits_le32(&ccm_regs->cbcmr, MXC_CCM_CBCMR_PCIE_AXI_CLK_SEL);

arch/arm/include/asm/arch-mx6/iomux.h

@@ -18,6 +18,12 @@
 #define IOMUXC_GPR1_REF_SSP_EN			(1 << 16)
 #define IOMUXC_GPR1_TEST_POWERDOWN		(1 << 18)
 
+/*
+ * IOMUXC_GPR5 bit fields
+ */
+#define IOMUXC_GPR5_PCIE_BTNRST			(1 << 19)
+#define IOMUXC_GPR5_PCIE_PERST			(1 << 18)
+
 /*
  * IOMUXC_GPR8 bit fields
  */
@@ -35,12 +41,15 @@
 /*
  * IOMUXC_GPR12 bit fields
  */
+#define IOMUXC_GPR12_RX_EQ_2			(0x2 << 0)
+#define IOMUXC_GPR12_RX_EQ_MASK			(0x7 << 0)
 #define IOMUXC_GPR12_LOS_LEVEL_9		(0x9 << 4)
 #define IOMUXC_GPR12_LOS_LEVEL_MASK		(0x1f << 4)
 #define IOMUXC_GPR12_APPS_LTSSM_ENABLE		(1 << 10)
 #define IOMUXC_GPR12_DEVICE_TYPE_EP		(0x0 << 12)
 #define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x4 << 12)
 #define IOMUXC_GPR12_DEVICE_TYPE_MASK		(0xf << 12)
+#define IOMUXC_GPR12_TEST_POWERDOWN		(1 << 30)
 
 /*
  * IOMUXC_GPR13 bit fields

drivers/pci/pcie_imx.c

@@ -23,13 +23,20 @@
 #define PCI_ACCESS_READ  0
 #define PCI_ACCESS_WRITE 1
 
+#ifdef CONFIG_MX6SX
+#define MX6_DBI_ADDR	0x08ffc000
+#define MX6_IO_ADDR	0x08000000
+#define MX6_MEM_ADDR	0x08100000
+#define MX6_ROOT_ADDR	0x08f00000
+#else
 #define MX6_DBI_ADDR	0x01ffc000
-#define MX6_DBI_SIZE	0x4000
 #define MX6_IO_ADDR	0x01000000
-#define MX6_IO_SIZE	0x100000
 #define MX6_MEM_ADDR	0x01100000
-#define MX6_MEM_SIZE	0xe00000
 #define MX6_ROOT_ADDR	0x01f00000
+#endif
+#define MX6_DBI_SIZE	0x4000
+#define MX6_IO_SIZE	0x100000
+#define MX6_MEM_SIZE	0xe00000
 #define MX6_ROOT_SIZE	0xfc000
 
 /* PCIe Port Logic registers (memory-mapped) */
@@ -57,6 +64,8 @@
 #define PHY_RX_OVRD_IN_LO_RX_DATA_EN (1 << 5)
 #define PHY_RX_OVRD_IN_LO_RX_PLL_EN (1 << 3)
 
+#define PCIE_PHY_PUP_REQ		(1 << 7)
+
 /* iATU registers */
 #define PCIE_ATU_VIEWPORT		0x900
 #define PCIE_ATU_REGION_INBOUND		(0x1 << 31)
@@ -421,9 +430,19 @@ static int imx_pcie_write_config(struct pci_controller *hose, pci_dev_t d,
 static int imx6_pcie_assert_core_reset(void)
 {
 	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
-
+#if defined(CONFIG_MX6SX)
+	struct gpc *gpc_regs = (struct gpc *)GPC_BASE_ADDR;
+
+	/* SSP_EN is not used on MX6SX anymore */
+	setbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
+	/* Force PCIe PHY reset */
+	setbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
+	/* Power up PCIe PHY */
+	setbits_le32(&gpc_regs->cntr, PCIE_PHY_PUP_REQ);
+#else
 	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
 	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
+#endif
 
 	return 0;
 }
@@ -441,6 +460,12 @@ static int imx6_pcie_init_phy(void)
 			IOMUXC_GPR12_LOS_LEVEL_MASK,
 			IOMUXC_GPR12_LOS_LEVEL_9);
 
+#ifdef CONFIG_MX6SX
+	clrsetbits_le32(&iomuxc_regs->gpr[12],
+			IOMUXC_GPR12_RX_EQ_MASK,
+			IOMUXC_GPR12_RX_EQ_2);
+#endif
+
 	writel((0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN1_OFFSET) |
 	       (0x0 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_3P5DB_OFFSET) |
 	       (20 << IOMUXC_GPR8_PCS_TX_DEEMPH_GEN2_6DB_OFFSET) |
@@ -517,9 +542,16 @@ static int imx6_pcie_deassert_core_reset(void)
 	 */
 	mdelay(50);
 
+#if defined(CONFIG_MX6SX)
+	/* SSP_EN is not used on MX6SX anymore */
+	clrbits_le32(&iomuxc_regs->gpr[12], IOMUXC_GPR12_TEST_POWERDOWN);
+	/* Clear PCIe PHY reset bit */
+	clrbits_le32(&iomuxc_regs->gpr[5], IOMUXC_GPR5_PCIE_BTNRST);
+#else
 	/* Enable PCIe */
 	clrbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_TEST_POWERDOWN);
 	setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_REF_SSP_EN);
+#endif
 
 	imx6_pcie_toggle_reset();