mpc85xx: powerpc: usb: Enable Usb phy initialisation settings for P1010

CONFIG_SYS_FSL_USB1_PHY_ENABLE is set and the USB Phy
offset are set to enable the initial setting of Usb Phy for P1010.

Signed-off-by: Sriram Dash <sriram.dash@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

arch/powerpc/include/asm/config_mpc85xx.h

@@ -162,6 +162,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447
 #define CONFIG_SYS_FSL_ERRATUM_A004508
 #define CONFIG_SYS_FSL_ERRATUM_A007075
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
 #define CONFIG_SYS_FSL_ERRATUM_A006261
 #define CONFIG_SYS_FSL_ERRATUM_A004477
 #define CONFIG_SYS_FSL_A004447_SVR_REV	0x10

arch/powerpc/include/asm/immap_85xx.h

@@ -2953,6 +2953,8 @@ struct ccsr_pman {
 #define CONFIG_SYS_MPC85xx_DMA_OFFSET		0x21000
 #define CONFIG_SYS_MPC85xx_USB1_OFFSET		0x22000
 #define CONFIG_SYS_MPC85xx_USB2_OFFSET		0x23000
+#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET	0xE5000
+#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET	0xE5100
 #ifdef CONFIG_TSECV2
 #define CONFIG_SYS_TSEC1_OFFSET			0xB0000
 #elif defined(CONFIG_TSECV2_1)