dm: x86: queensbay: Add an interrupt driver

Add a driver for interrupts on queensbay and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>

arch/x86/cpu/queensbay/Makefile

@@ -4,5 +4,5 @@
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += fsp_configs.o
+obj-y += fsp_configs.o irq.o
 obj-y += tnc.o topcliff.o

arch/x86/cpu/queensbay/irq.c

+/*
+ * Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
+ * Copyright (C) 2015 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/arch/device.h>
+#include <asm/arch/tnc.h>
+
+int queensbay_irq_router_probe(struct udevice *dev)
+{
+	struct tnc_rcba *rcba;
+	u32 base;
+
+	base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
+	base &= ~MEM_BAR_EN;
+	rcba = (struct tnc_rcba *)base;
+
+	/* Make sure all internal PCI devices are using INTA */
+	writel(INTA, &rcba->d02ip);
+	writel(INTA, &rcba->d03ip);
+	writel(INTA, &rcba->d27ip);
+	writel(INTA, &rcba->d31ip);
+	writel(INTA, &rcba->d23ip);
+	writel(INTA, &rcba->d24ip);
+	writel(INTA, &rcba->d25ip);
+	writel(INTA, &rcba->d26ip);
+
+	/*
+	 * Route TunnelCreek PCI device interrupt pin to PIRQ
+	 *
+	 * Since PCIe downstream ports received INTx are routed to PIRQ
+	 * A/B/C/D directly and not configurable, we have to route PCIe
+	 * root ports' INTx to PIRQ A/B/C/D as well. For other devices
+	 * on TunneCreek, route them to PIRQ E/F/G/H.
+	 */
+	writew(PIRQE, &rcba->d02ir);
+	writew(PIRQF, &rcba->d03ir);
+	writew(PIRQG, &rcba->d27ir);
+	writew(PIRQH, &rcba->d31ir);
+	writew(PIRQA, &rcba->d23ir);
+	writew(PIRQB, &rcba->d24ir);
+	writew(PIRQC, &rcba->d25ir);
+	writew(PIRQD, &rcba->d26ir);
+
+	return irq_router_common_init(dev);
+}
+
+static const struct udevice_id queensbay_irq_router_ids[] = {
+	{ .compatible = "intel,queensbay-irq-router" },
+	{ }
+};
+
+U_BOOT_DRIVER(queensbay_irq_router_drv) = {
+	.name		= "queensbay_intel_irq",
+	.id		= UCLASS_IRQ,
+	.of_match	= queensbay_irq_router_ids,
+	.probe		= queensbay_irq_router_probe,
+};

arch/x86/cpu/queensbay/tnc.c

@@ -69,43 +69,6 @@ int arch_early_init_r(void)
 	return 0;
 }
 
-void cpu_irq_init(void)
-{
-	struct tnc_rcba *rcba;
-	u32 base;
-
-	base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
-	base &= ~MEM_BAR_EN;
-	rcba = (struct tnc_rcba *)base;
-
-	/* Make sure all internal PCI devices are using INTA */
-	writel(INTA, &rcba->d02ip);
-	writel(INTA, &rcba->d03ip);
-	writel(INTA, &rcba->d27ip);
-	writel(INTA, &rcba->d31ip);
-	writel(INTA, &rcba->d23ip);
-	writel(INTA, &rcba->d24ip);
-	writel(INTA, &rcba->d25ip);
-	writel(INTA, &rcba->d26ip);
-
-	/*
-	 * Route TunnelCreek PCI device interrupt pin to PIRQ
-	 *
-	 * Since PCIe downstream ports received INTx are routed to PIRQ
-	 * A/B/C/D directly and not configurable, we have to route PCIe
-	 * root ports' INTx to PIRQ A/B/C/D as well. For other devices
-	 * on TunneCreek, route them to PIRQ E/F/G/H.
-	 */
-	writew(PIRQE, &rcba->d02ir);
-	writew(PIRQF, &rcba->d03ir);
-	writew(PIRQG, &rcba->d27ir);
-	writew(PIRQH, &rcba->d31ir);
-	writew(PIRQA, &rcba->d23ir);
-	writew(PIRQB, &rcba->d24ir);
-	writew(PIRQC, &rcba->d25ir);
-	writew(PIRQD, &rcba->d26ir);
-}
-
 int arch_misc_init(void)
 {
 	unprotect_spi_flash();

arch/x86/dts/crownbay.dts

@@ -164,7 +164,7 @@
 			compatible = "intel,pch7";
 
 			irq-router {
-				compatible = "intel,irq-router";
+				compatible = "intel,queensbay-irq-router";
 				intel,pirq-config = "pci";
 				intel,pirq-link = <0x60 8>;
 				intel,pirq-mask = <0xcee0>;