configs: dra7xx_evm: Enable SPL_DM

Enable SPL_DM on all DRA7 based platforms.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

configs/dra7xx_evm_defconfig

 CONFIG_ARM=y
 CONFIG_OMAP54XX=y
-CONFIG_TARGET_DRA7XX_EVM=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
 # CONFIG_SPL_NAND_SUPPORT is not set
+CONFIG_TARGET_DRA7XX_EVM=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_ARMV7_LPAE=y
@@ -14,7 +15,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_SPL_OS_BOOT=y
 CONFIG_HUSH_PARSER=y
@@ -52,8 +55,10 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
 CONFIG_DM=y
+CONFIG_SPL_DM=y
 # CONFIG_BLK is not set
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -96,4 +101,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_SPL_OF_LIBFDT=y

configs/dra7xx_hs_evm_defconfig

@@ -20,7 +20,9 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_DMA_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_FASTBOOT=y
@@ -57,8 +59,10 @@ CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_ISO_PARTITION=y
 CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIST="dra7-evm dra72-evm dra72-evm-revc dra71-evm"
 CONFIG_DM=y
+CONFIG_SPL_DM=y
 # CONFIG_BLK is not set
 CONFIG_DFU_MMC=y
 CONFIG_DFU_RAM=y
@@ -101,4 +105,3 @@ CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
 CONFIG_G_DNL_VENDOR_NUM=0x0451
 CONFIG_G_DNL_PRODUCT_NUM=0xd022
-CONFIG_SPL_OF_LIBFDT=y

include/configs/dra7xx_evm.h

@@ -122,11 +122,6 @@
 #define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
 #define CONFIG_QSPI_QUAD_SUPPORT
 
-#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_SPI
-#undef CONFIG_DM_SPI_FLASH
-#endif
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)

include/configs/ti_omap5_common.h

@@ -42,7 +42,7 @@
  * Hardware drivers
  */
 #define CONFIG_SYS_NS16550_CLK		48000000
-#if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
+#if !defined(CONFIG_DM_SERIAL)
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #endif
@@ -160,14 +160,8 @@
 #define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
 #endif
 
-/*
- * Disable MMC DM for SPL build and can be re-enabled after adding
- * DM support in SPL
- */
 #ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_MMC
 #undef CONFIG_TIMER
-#undef CONFIG_DM_ETH
 #endif
 
 #endif /* __CONFIG_TI_OMAP5_COMMON_H */