arm: mvebu: Add SPI driver model support

This patch enables the DM support for the SPI driver and the
SPI NOR flash chips. Some MVEBU boards boot from SPI NOR, so
adding the aliases and enabling CONFIG_DM_SEQ_ALIAS is needed
here.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Simon Glass <sjg@chromium.org>

arch/arm/Kconfig

@@ -118,8 +118,11 @@ config ARCH_MVEBU
 	select OF_SEPARATE
 	select DM
 	select DM_SERIAL
+	select DM_SPI
+	select DM_SPI_FLASH
 	select SPL_DM
 	select SPL_OF_CONTROL
+	select SPL_SIMPLE_BUS
 
 config TARGET_DEVKIT3250
 	bool "Support devkit3250"

arch/arm/dts/armada-388-gp.dts

@@ -51,6 +51,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	aliases {
+		spi0 = &spi0;
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>; /* 2 GB */
@@ -65,8 +69,10 @@
 				pinctrl-names = "default";
 				pinctrl-0 = <&spi0_pins>;
 				status = "okay";
+				u-boot,dm-pre-reloc;
 
 				spi-flash@0 {
+					u-boot,dm-pre-reloc;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "st,m25p128", "jedec,spi-nor";

arch/arm/dts/armada-38x.dtsi

@@ -70,6 +70,7 @@
 
 	soc {
 		compatible = "marvell,armada380-mbus", "simple-bus";
+		u-boot,dm-pre-reloc;
 		#address-cells = <2>;
 		#size-cells = <1>;
 		controller = <&mbusc>;
@@ -134,6 +135,7 @@
 
 		internal-regs {
 			compatible = "simple-bus";
+			u-boot,dm-pre-reloc;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;

arch/arm/dts/armada-xp-gp.dts

@@ -68,6 +68,10 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	aliases {
+		spi0 = &spi0;
+	};
+
 	memory {
 		device_type = "memory";
 		/*
@@ -224,8 +228,10 @@
 
 			spi0: spi@10600 {
 				status = "okay";
+				u-boot,dm-pre-reloc;
 
 				spi-flash@0 {
+					u-boot,dm-pre-reloc;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					compatible = "n25q128a13", "jedec,spi-nor";

arch/arm/dts/armada-xp.dtsi

@@ -63,6 +63,7 @@
 
 	soc {
 		compatible = "marvell,armadaxp-mbus", "simple-bus";
+		u-boot,dm-pre-reloc;
 
 		bootrom {
 			compatible = "marvell,bootrom";

arch/arm/mach-mvebu/include/mach/config.h

@@ -47,8 +47,7 @@
  * SPI Flash configuration
  */
 #ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
-#define CONFIG_KIRKWOOD_SPI		1
+#define CONFIG_KIRKWOOD_SPI
 #ifndef CONFIG_ENV_SPI_BUS
 # define CONFIG_ENV_SPI_BUS		0
 #endif
@@ -60,6 +59,9 @@
 #endif
 #endif
 
+/* Needed for SPI NOR booting in SPL */
+#define CONFIG_DM_SEQ_ALIAS		1
+
 /*
  * Ethernet Driver configuration
  */

arch/arm/mach-mvebu/include/mach/soc.h

@@ -47,7 +47,6 @@
 #define MVEBU_SDRAM_SCRATCH	(MVEBU_REGISTER(0x01504))
 #define MVEBU_L2_CACHE_BASE	(MVEBU_REGISTER(0x08000))
 #define CONFIG_SYS_PL310_BASE	MVEBU_L2_CACHE_BASE
-#define MVEBU_SPI_BASE		(MVEBU_REGISTER(0x10600))
 #define MVEBU_TWSI_BASE		(MVEBU_REGISTER(0x11000))
 #define MVEBU_MPP_BASE		(MVEBU_REGISTER(0x18000))
 #define MVEBU_GPIO0_BASE	(MVEBU_REGISTER(0x18100))

include/configs/db-88f6820-gp.h

@@ -160,7 +160,7 @@
 #define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SPL_SPI_BUS		0
 #define CONFIG_SPL_SPI_CS		0
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 #define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
 #endif