cpu.c

/*
 * Copyright (C) 2005-2006 Atmel Corporation
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#include <common.h>
#include <command.h>

#include <asm/io.h>
#include <asm/sections.h>
#include <asm/sysreg.h>

#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>

#include "hsmc3.h"

/* Sanity checks */
#if (CONFIG_SYS_CLKDIV_CPU > CONFIG_SYS_CLKDIV_HSB)		\
	|| (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBA)	\
	|| (CONFIG_SYS_CLKDIV_HSB > CONFIG_SYS_CLKDIV_PBB)
# error Constraint fCPU >= fHSB >= fPB{A,B} violated
#endif
#if defined(CONFIG_PLL) && ((CONFIG_SYS_PLL0_MUL < 1) || (CONFIG_SYS_PLL0_DIV < 1))
# error Invalid PLL multiplier and/or divider
#endif

DECLARE_GLOBAL_DATA_PTR;

int arch_cpu_init(void)
{
	extern void _evba(void);

	gd->arch.cpu_hz = CONFIG_SYS_OSC0_HZ;

	/* TODO: Move somewhere else, but needs to be run before we
	 * increase the clock frequency. */
	hsmc3_writel(MODE0, 0x00031103);
	hsmc3_writel(CYCLE0, 0x000c000d);
	hsmc3_writel(PULSE0, 0x0b0a0906);
	hsmc3_writel(SETUP0, 0x00010002);

	clk_init();

	/* Update the CPU speed according to the PLL configuration */
	gd->arch.cpu_hz = get_cpu_clk_rate();

	/* Set up the exception handler table and enable exceptions */
	sysreg_write(EVBA, (unsigned long)&_evba);
	asm volatile("csrf	%0" : : "i"(SYSREG_EM_OFFSET));

	return 0;
}

void prepare_to_boot(void)
{
	/* Flush both caches and the write buffer */
	asm volatile("cache  %0[4], 010\n\t"
		     "cache  %0[0], 000\n\t"
		     "sync   0" : : "r"(0) : "memory");
}

int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	/* This will reset the CPU core, caches, MMU and all internal busses */
	__builtin_mtdr(8, 1 << 13);	/* set DC:DBE */
	__builtin_mtdr(8, 1 << 30);	/* set DC:RES */

	/* Flush the pipeline before we declare it a failure */
	asm volatile("sub   pc, pc, -4");

	return -1;
}