Skip to content
Snippets Groups Projects
Select Git revision
  • master default protected
  • early-display
  • variant-emmc-nvme-boot
  • 2023-01-25
  • v3
  • variant-emmc-nvme-boot
  • 2020-06-01
7 results

fsl_pci_init.c

Blame
  • Forked from Reform / reform-boundary-uboot
    Source project has a limited visibility.
    • Liu Gang's avatar
      c8b28152
      powerpc/boot: Change the macro of Boot from SRIO and PCIE master module · c8b28152
      Liu Gang authored
      
      Currently, the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" can enable
      the master module of Boot from SRIO and PCIE on a platform. But this
      is not a silicon feature, it's just a specific booting mode based on
      the SRIO and PCIE interfaces. So it's inappropriate to put the macro
      into the file arch/powerpc/include/asm/config_mpc85xx.h.
      
      Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to
      "CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from
      arch/powerpc/include/asm/config_mpc85xx.h file, and add those macros
      in configuration header file of each board which can support the
      master module of Boot from SRIO and PCIE.
      
      Signed-off-by: default avatarLiu Gang <Gang.Liu@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
      c8b28152
      History
      powerpc/boot: Change the macro of Boot from SRIO and PCIE master module
      Liu Gang authored
      
      Currently, the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" can enable
      the master module of Boot from SRIO and PCIE on a platform. But this
      is not a silicon feature, it's just a specific booting mode based on
      the SRIO and PCIE interfaces. So it's inappropriate to put the macro
      into the file arch/powerpc/include/asm/config_mpc85xx.h.
      
      Change the macro "CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER" to
      "CONFIG_SRIO_PCIE_BOOT_MASTER", remove them from
      arch/powerpc/include/asm/config_mpc85xx.h file, and add those macros
      in configuration header file of each board which can support the
      master module of Boot from SRIO and PCIE.
      
      Signed-off-by: default avatarLiu Gang <Gang.Liu@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
    flash.h NaN GiB