Skip to content
Snippets Groups Projects
Select Git revision
4 results

processor.h

Blame
  • Forked from Reform / reform-boundary-uboot
    Source project has a limited visibility.
    • Timur Tabi's avatar
      4905443f
      powerpc/85xx: Add P5040 processor support · 4905443f
      Timur Tabi authored
      
      Add support for the Freescale P5040 SOC, which is similar to the P5020.
      Features of the P5040 are:
      
      Four P5040 single-threaded e5500 cores built
          Up to 2.4 GHz with 64-bit ISA support
          Three levels of instruction: user, supervisor, hypervisor
      CoreNet platform cache (CPC)
          2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
      Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
              support Up to 1600MT/s
          Memory pre-fetch engine
      DPAA incorporating acceleration for the following functions
          Packet parsing, classification, and distribution (FMAN)
          Queue management for scheduling, packet sequencing and
          congestion management (QMAN)
          Hardware buffer management for buffer allocation and
          de-allocation (BMAN)
          Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes
          20 lanes at up to 5 Gbps
          Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
          Two 10 Gbps Ethernet MACs
          Ten 1 Gbps Ethernet MACs
      High-speed peripheral interfaces
          Two PCI Express 2.0/3.0 controllers
      Additional peripheral interfaces
          Two serial ATA (SATA 2.0) controllers
          Two high-speed USB 2.0 controllers with integrated PHY
          Enhanced secure digital host controller (SD/MMC/eMMC)
          Enhanced serial peripheral interface (eSPI)
          Two I2C controllers
          Four UARTs
          Integrated flash controller supporting NAND and NOR flash
      DMA
          Dual four channel
      Support for hardware virtualization and partitioning enforcement
          Extra privileged level for hypervisor support
      QorIQ Trust Architecture 1.1
          Secure boot, secure debug, tamper detection, volatile key storage
      
      Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>
      4905443f
      History
      powerpc/85xx: Add P5040 processor support
      Timur Tabi authored
      
      Add support for the Freescale P5040 SOC, which is similar to the P5020.
      Features of the P5040 are:
      
      Four P5040 single-threaded e5500 cores built
          Up to 2.4 GHz with 64-bit ISA support
          Three levels of instruction: user, supervisor, hypervisor
      CoreNet platform cache (CPC)
          2.0 MB configures as dual 1 MB blocks hierarchical interconnect fabric
      Two 64-bit DDR3/3L SDRAM memory controllers with ECC and interleaving
              support Up to 1600MT/s
          Memory pre-fetch engine
      DPAA incorporating acceleration for the following functions
          Packet parsing, classification, and distribution (FMAN)
          Queue management for scheduling, packet sequencing and
          congestion management (QMAN)
          Hardware buffer management for buffer allocation and
          de-allocation (BMAN)
          Cryptography acceleration (SEC 5.2) at up to 40 Gbps SerDes
          20 lanes at up to 5 Gbps
          Supports SGMII, XAUI, PCIe rev1.1/2.0, SATA Ethernet interfaces
          Two 10 Gbps Ethernet MACs
          Ten 1 Gbps Ethernet MACs
      High-speed peripheral interfaces
          Two PCI Express 2.0/3.0 controllers
      Additional peripheral interfaces
          Two serial ATA (SATA 2.0) controllers
          Two high-speed USB 2.0 controllers with integrated PHY
          Enhanced secure digital host controller (SD/MMC/eMMC)
          Enhanced serial peripheral interface (eSPI)
          Two I2C controllers
          Four UARTs
          Integrated flash controller supporting NAND and NOR flash
      DMA
          Dual four channel
      Support for hardware virtualization and partitioning enforcement
          Extra privileged level for hypervisor support
      QorIQ Trust Architecture 1.1
          Secure boot, secure debug, tamper detection, volatile key storage
      
      Signed-off-by: default avatarTimur Tabi <timur@freescale.com>
      Signed-off-by: default avatarAndy Fleming <afleming@freescale.com>