Select Git revision
Forked from
Reform / reform-boundary-uboot
Source project has a limited visibility.
-
Joakim Tjernlund authored
After issuing a STOP one must wait until the STOP has completed on the bus before doing something new to the controller. Also add an extra read of SR as the manual mentions doing that is a good idea. Remove surplus write of CR just before a write, isn't required and could potentially disturb the I2C bus. Signed-off-by:Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Joakim Tjernlund authoredAfter issuing a STOP one must wait until the STOP has completed on the bus before doing something new to the controller. Also add an extra read of SR as the manual mentions doing that is a good idea. Remove surplus write of CR just before a write, isn't required and could potentially disturb the I2C bus. Signed-off-by:
