Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
/*
* Freescale i.MX28 SPI driver
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
* NOTE: This driver only supports the SPI-controller chipselects,
* GPIO driven chipselects are not supported.
*/
#include <common.h>
#include <malloc.h>
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#define MXS_SPI_MAX_TIMEOUT 1000000
#define MXS_SPI_PORT_OFFSET 0x2000
struct mxs_spi_slave {
struct spi_slave slave;
uint32_t max_khz;
uint32_t mode;
struct mx28_ssp_regs *regs;
};
static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
{
return container_of(slave, struct mxs_spi_slave, slave);
}
void spi_init(void)
{
}
struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int mode)
{
struct mxs_spi_slave *mxs_slave;
uint32_t addr;
if (bus > 3) {
printf("MXS SPI: Max bus number is 3\n");
return NULL;
}
mxs_slave = malloc(sizeof(struct mxs_spi_slave));
if (!mxs_slave)
return NULL;
addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET);
mxs_slave->slave.bus = bus;
mxs_slave->slave.cs = cs;
mxs_slave->max_khz = max_hz / 1000;
mxs_slave->mode = mode;
mxs_slave->regs = (struct mx28_ssp_regs *)addr;
return &mxs_slave->slave;
}
void spi_free_slave(struct spi_slave *slave)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
free(mxs_slave);
}
int spi_claim_bus(struct spi_slave *slave)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
uint32_t reg = 0;
mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
writel(reg, &ssp_regs->hw_ssp_ctrl1);
writel(0, &ssp_regs->hw_ssp_cmd0);
mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
return 0;
}
void spi_release_bus(struct spi_slave *slave)
{
}
static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs)
{
writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
}
static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs)
{
writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
int len = bitlen / 8;
const char *tx = dout;
char *rx = din;
char dummy;
if (bitlen == 0) {
if (flags & SPI_XFER_END) {
rx = &dummy;
len = 1;
} else
return 0;
}
if (!rx && !tx)
return 0;
if (flags & SPI_XFER_BEGIN)
mxs_spi_start_xfer(ssp_regs);
while (len--) {
/* We transfer 1 byte */
writel(1, &ssp_regs->hw_ssp_xfer_size);
if ((flags & SPI_XFER_END) && !len)
mxs_spi_end_xfer(ssp_regs);
if (tx)
writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
else
writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for start\n");
}
if (tx)
writel(*tx++, &ssp_regs->hw_ssp_data);
writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
if (rx) {
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for data\n");
}
*rx = readl(&ssp_regs->hw_ssp_data);
rx++;
}
if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
printf("MXS SPI: Timeout waiting for finish\n");