Skip to content
Snippets Groups Projects
tegra2_mmc.c 14.4 KiB
Newer Older
  • Learn to ignore specific revisions
  • /*
     * (C) Copyright 2009 SAMSUNG Electronics
     * Minkyu Kang <mk7.kang@samsung.com>
     * Jaehoon Chung <jh80.chung@samsung.com>
     * Portions Copyright 2011 NVIDIA Corporation
     *
     * This program is free software; you can redistribute it and/or modify
     * it under the terms of the GNU General Public License as published by
     * the Free Software Foundation; either version 2 of the License, or
     * (at your option) any later version.
     *
     * This program is distributed in the hope that it will be useful,
     * but WITHOUT ANY WARRANTY; without even the implied warranty of
     * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     * GNU General Public License for more details.
     *
     * You should have received a copy of the GNU General Public License
     * along with this program; if not, write to the Free Software
     * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
     */
    
    #include <common.h>
    #include <mmc.h>
    
    #include <asm/io.h>
    #include <asm/arch/clk_rst.h>
    
    #include <asm/arch/clock.h>
    
    #include "tegra2_mmc.h"
    
    /* support 4 mmc hosts */
    struct mmc mmc_dev[4];
    struct mmc_host mmc_host[4];
    
    
    
    /**
     * Get the host address and peripheral ID for a device. Devices are numbered
     * from 0 to 3.
     *
     * @param host		Structure to fill in (base, reg, mmc_id)
     * @param dev_index	Device index (0-3)
     */
    static void tegra2_get_setup(struct mmc_host *host, int dev_index)
    
    {
    	debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
    
    	switch (dev_index) {
    	case 1:
    
    		host->base = TEGRA2_SDMMC3_BASE;
    		host->mmc_id = PERIPH_ID_SDMMC3;
    
    		host->base = TEGRA2_SDMMC2_BASE;
    		host->mmc_id = PERIPH_ID_SDMMC2;
    
    		host->base = TEGRA2_SDMMC1_BASE;
    		host->mmc_id = PERIPH_ID_SDMMC1;
    
    	case 0:
    
    		host->base = TEGRA2_SDMMC4_BASE;
    		host->mmc_id = PERIPH_ID_SDMMC4;
    
    	host->reg = (struct tegra2_mmc *)host->base;
    
    }
    
    static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
    {
    	unsigned char ctrl;
    
    	debug("data->dest: %08X, data->blocks: %u, data->blocksize: %u\n",
    	(u32)data->dest, data->blocks, data->blocksize);
    
    	writel((u32)data->dest, &host->reg->sysad);
    	/*
    	 * DMASEL[4:3]
    	 * 00 = Selects SDMA
    	 * 01 = Reserved
    	 * 10 = Selects 32-bit Address ADMA2
    	 * 11 = Selects 64-bit Address ADMA2
    	 */
    	ctrl = readb(&host->reg->hostctl);
    
    	ctrl &= ~TEGRA_MMC_HOSTCTL_DMASEL_MASK;
    	ctrl |= TEGRA_MMC_HOSTCTL_DMASEL_SDMA;
    
    	writeb(ctrl, &host->reg->hostctl);
    
    	/* We do not handle DMA boundaries, so set it to max (512 KiB) */
    	writew((7 << 12) | (data->blocksize & 0xFFF), &host->reg->blksize);
    	writew(data->blocks, &host->reg->blkcnt);
    }
    
    static void mmc_set_transfer_mode(struct mmc_host *host, struct mmc_data *data)
    {
    	unsigned short mode;
    	debug(" mmc_set_transfer_mode called\n");
    	/*
    	 * TRNMOD
    	 * MUL1SIN0[5]	: Multi/Single Block Select
    	 * RD1WT0[4]	: Data Transfer Direction Select
    	 *	1 = read
    	 *	0 = write
    	 * ENACMD12[2]	: Auto CMD12 Enable
    	 * ENBLKCNT[1]	: Block Count Enable
    	 * ENDMA[0]	: DMA Enable
    	 */
    
    	mode = (TEGRA_MMC_TRNMOD_DMA_ENABLE |
    		TEGRA_MMC_TRNMOD_BLOCK_COUNT_ENABLE);
    
    
    		mode |= TEGRA_MMC_TRNMOD_MULTI_BLOCK_SELECT;
    
    
    	if (data->flags & MMC_DATA_READ)
    
    		mode |= TEGRA_MMC_TRNMOD_DATA_XFER_DIR_SEL_READ;
    
    	if (data->flags & MMC_DATA_WRITE) {
    		if ((uintptr_t)data->src & (ARCH_DMA_MINALIGN - 1))
    			printf("Warning: unaligned write to %p may fail\n",
    			       data->src);
    		flush_dcache_range((ulong)data->src, (ulong)data->src +
    			data->blocks * data->blocksize);
    	}
    
    
    static int mmc_wait_inhibit(struct mmc_host *host,
    			    struct mmc_cmd *cmd,
    			    struct mmc_data *data,
    			    unsigned int timeout)
    
    	 * CMDINHDAT[1] : Command Inhibit (DAT)
    	 * CMDINHCMD[0] : Command Inhibit (CMD)
    
    	unsigned int mask = TEGRA_MMC_PRNSTS_CMD_INHIBIT_CMD;
    
    
    	/*
    	 * We shouldn't wait for data inhibit for stop commands, even
    	 * though they might use busy signaling
    	 */
    
    	if ((data == NULL) && (cmd->resp_type & MMC_RSP_BUSY))
    		mask |= TEGRA_MMC_PRNSTS_CMD_INHIBIT_DAT;
    
    
    	while (readl(&host->reg->prnsts) & mask) {
    		if (timeout == 0) {
    			printf("%s: timeout error\n", __func__);
    			return -1;
    		}
    		timeout--;
    		udelay(1000);
    	}
    
    
    	return 0;
    }
    
    static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
    			struct mmc_data *data)
    {
    	struct mmc_host *host = (struct mmc_host *)mmc->priv;
    	int flags, i;
    	int result;
    	unsigned int mask;
    	unsigned int retry = 0x100000;
    	debug(" mmc_send_cmd called\n");
    
    	result = mmc_wait_inhibit(host, cmd, data, 10 /* ms */);
    
    	if (result < 0)
    		return result;
    
    
    	if (data)
    		mmc_prepare_data(host, data);
    
    	debug("cmd->arg: %08x\n", cmd->cmdarg);
    	writel(cmd->cmdarg, &host->reg->argument);
    
    	if (data)
    		mmc_set_transfer_mode(host, data);
    
    	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
    		return -1;
    
    	/*
    	 * CMDREG
    	 * CMDIDX[13:8]	: Command index
    	 * DATAPRNT[5]	: Data Present Select
    	 * ENCMDIDX[4]	: Command Index Check Enable
    	 * ENCMDCRC[3]	: Command CRC Check Enable
    	 * RSPTYP[1:0]
    	 *	00 = No Response
    	 *	01 = Length 136
    	 *	10 = Length 48
    	 *	11 = Length 48 Check busy after response
    	 */
    	if (!(cmd->resp_type & MMC_RSP_PRESENT))
    
    		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_NO_RESPONSE;
    
    	else if (cmd->resp_type & MMC_RSP_136)
    
    		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_136;
    
    	else if (cmd->resp_type & MMC_RSP_BUSY)
    
    		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48_BUSY;
    
    		flags = TEGRA_MMC_CMDREG_RESP_TYPE_SELECT_LENGTH_48;
    
    		flags |= TEGRA_MMC_TRNMOD_CMD_CRC_CHECK;
    
    	if (cmd->resp_type & MMC_RSP_OPCODE)
    
    		flags |= TEGRA_MMC_TRNMOD_CMD_INDEX_CHECK;
    
    		flags |= TEGRA_MMC_TRNMOD_DATA_PRESENT_SELECT_DATA_TRANSFER;
    
    
    	debug("cmd: %d\n", cmd->cmdidx);
    
    	writew((cmd->cmdidx << 8) | flags, &host->reg->cmdreg);
    
    	for (i = 0; i < retry; i++) {
    		mask = readl(&host->reg->norintsts);
    		/* Command Complete */
    
    		if (mask & TEGRA_MMC_NORINTSTS_CMD_COMPLETE) {
    
    			if (!data)
    				writel(mask, &host->reg->norintsts);
    			break;
    		}
    	}
    
    	if (i == retry) {
    		printf("%s: waiting for status update\n", __func__);
    
    		writel(mask, &host->reg->norintsts);
    
    	if (mask & TEGRA_MMC_NORINTSTS_CMD_TIMEOUT) {
    
    		/* Timeout Error */
    		debug("timeout: %08x cmd %d\n", mask, cmd->cmdidx);
    
    		writel(mask, &host->reg->norintsts);
    
    	} else if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
    
    		/* Error Interrupt */
    		debug("error: %08x cmd %d\n", mask, cmd->cmdidx);
    
    		writel(mask, &host->reg->norintsts);
    
    		return -1;
    	}
    
    	if (cmd->resp_type & MMC_RSP_PRESENT) {
    		if (cmd->resp_type & MMC_RSP_136) {
    			/* CRC is stripped so we need to do some shifting. */
    			for (i = 0; i < 4; i++) {
    				unsigned int offset =
    					(unsigned int)(&host->reg->rspreg3 - i);
    				cmd->response[i] = readl(offset) << 8;
    
    				if (i != 3) {
    					cmd->response[i] |=
    						readb(offset - 1);
    				}
    				debug("cmd->resp[%d]: %08x\n",
    						i, cmd->response[i]);
    			}
    		} else if (cmd->resp_type & MMC_RSP_BUSY) {
    			for (i = 0; i < retry; i++) {
    				/* PRNTDATA[23:20] : DAT[3:0] Line Signal */
    				if (readl(&host->reg->prnsts)
    					& (1 << 20))	/* DAT[0] */
    					break;
    			}
    
    			if (i == retry) {
    				printf("%s: card is still busy\n", __func__);
    
    				writel(mask, &host->reg->norintsts);
    
    				return TIMEOUT;
    			}
    
    			cmd->response[0] = readl(&host->reg->rspreg0);
    			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
    		} else {
    			cmd->response[0] = readl(&host->reg->rspreg0);
    			debug("cmd->resp[0]: %08x\n", cmd->response[0]);
    		}
    	}
    
    	if (data) {
    
    		unsigned long	start = get_timer(0);
    
    
    		while (1) {
    			mask = readl(&host->reg->norintsts);
    
    
    			if (mask & TEGRA_MMC_NORINTSTS_ERR_INTERRUPT) {
    
    				/* Error Interrupt */
    				writel(mask, &host->reg->norintsts);
    				printf("%s: error during transfer: 0x%08x\n",
    						__func__, mask);
    				return -1;
    
    			} else if (mask & TEGRA_MMC_NORINTSTS_DMA_INTERRUPT) {
    
    				/*
    				 * DMA Interrupt, restart the transfer where
    				 * it was interrupted.
    				 */
    				unsigned int address = readl(&host->reg->sysad);
    
    
    				writel(TEGRA_MMC_NORINTSTS_DMA_INTERRUPT,
    				       &host->reg->norintsts);
    				writel(address, &host->reg->sysad);
    
    			} else if (mask & TEGRA_MMC_NORINTSTS_XFER_COMPLETE) {
    
    				/* Transfer Complete */
    				debug("r/w is done\n");
    				break;
    
    			} else if (get_timer(start) > 2000UL) {
    				writel(mask, &host->reg->norintsts);
    				printf("%s: MMC Timeout\n"
    				       "    Interrupt status        0x%08x\n"
    				       "    Interrupt status enable 0x%08x\n"
    				       "    Interrupt signal enable 0x%08x\n"
    				       "    Present status          0x%08x\n",
    				       __func__, mask,
    				       readl(&host->reg->norintstsen),
    				       readl(&host->reg->norintsigen),
    				       readl(&host->reg->prnsts));
    				return -1;
    
    		if (data->flags & MMC_DATA_READ) {
    			if ((uintptr_t)data->dest & (ARCH_DMA_MINALIGN - 1))
    				printf("Warning: unaligned read from %p "
    					"may fail\n", data->dest);
    			invalidate_dcache_range((ulong)data->dest,
    				(ulong)data->dest +
    					data->blocks * data->blocksize);
    		}
    
    	}
    
    	udelay(1000);
    	return 0;
    }
    
    static void mmc_change_clock(struct mmc_host *host, uint clock)
    {
    
    	int div;
    
    	unsigned short clk;
    	unsigned long timeout;
    
    	/*
    	 * Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
    	 * PLLP_OUT0
    	 */
    
    	clock_adjust_periph_pll_div(host->mmc_id, CLOCK_ID_PERIPH, clock,
    				    &div);
    	debug("div = %d\n", div);
    
    
    	writew(0, &host->reg->clkcon);
    
    	/*
    	 * CLKCON
    	 * SELFREQ[15:8]	: base clock divided by value
    	 * ENSDCLK[2]		: SD Clock Enable
    	 * STBLINTCLK[1]	: Internal Clock Stable
    	 * ENINTCLK[0]		: Internal Clock Enable
    	 */
    
    	div >>= 1;
    
    	clk = ((div << TEGRA_MMC_CLKCON_SDCLK_FREQ_SEL_SHIFT) |
    	       TEGRA_MMC_CLKCON_INTERNAL_CLOCK_ENABLE);
    
    	writew(clk, &host->reg->clkcon);
    
    	/* Wait max 10 ms */
    	timeout = 10;
    
    	while (!(readw(&host->reg->clkcon) &
    		 TEGRA_MMC_CLKCON_INTERNAL_CLOCK_STABLE)) {
    
    		if (timeout == 0) {
    			printf("%s: timeout error\n", __func__);
    			return;
    		}
    		timeout--;
    		udelay(1000);
    	}
    
    
    	clk |= TEGRA_MMC_CLKCON_SD_CLOCK_ENABLE;
    
    	writew(clk, &host->reg->clkcon);
    
    	debug("mmc_change_clock: clkcon = %08X\n", clk);
    
    out:
    	host->clock = clock;
    }
    
    static void mmc_set_ios(struct mmc *mmc)
    {
    	struct mmc_host *host = mmc->priv;
    	unsigned char ctrl;
    	debug(" mmc_set_ios called\n");
    
    	debug("bus_width: %x, clock: %d\n", mmc->bus_width, mmc->clock);
    
    	/* Change clock first */
    	mmc_change_clock(host, mmc->clock);
    
    	ctrl = readb(&host->reg->hostctl);
    
    	/*
    	 * WIDE8[5]
    	 * 0 = Depend on WIDE4
    	 * 1 = 8-bit mode
    	 * WIDE4[1]
    	 * 1 = 4-bit mode
    	 * 0 = 1-bit mode
    	 */
    	if (mmc->bus_width == 8)
    		ctrl |= (1 << 5);
    	else if (mmc->bus_width == 4)
    		ctrl |= (1 << 1);
    	else
    		ctrl &= ~(1 << 1);
    
    	writeb(ctrl, &host->reg->hostctl);
    	debug("mmc_set_ios: hostctl = %08X\n", ctrl);
    }
    
    static void mmc_reset(struct mmc_host *host)
    {
    	unsigned int timeout;
    	debug(" mmc_reset called\n");
    
    	/*
    	 * RSTALL[0] : Software reset for all
    	 * 1 = reset
    	 * 0 = work
    	 */
    
    	writeb(TEGRA_MMC_SWRST_SW_RESET_FOR_ALL, &host->reg->swrst);
    
    
    	host->clock = 0;
    
    	/* Wait max 100 ms */
    	timeout = 100;
    
    	/* hw clears the bit when it's done */
    
    	while (readb(&host->reg->swrst) & TEGRA_MMC_SWRST_SW_RESET_FOR_ALL) {
    
    		if (timeout == 0) {
    			printf("%s: timeout error\n", __func__);
    			return;
    		}
    		timeout--;
    		udelay(1000);
    	}
    }
    
    static int mmc_core_init(struct mmc *mmc)
    {
    	struct mmc_host *host = (struct mmc_host *)mmc->priv;
    	unsigned int mask;
    	debug(" mmc_core_init called\n");
    
    	mmc_reset(host);
    
    	host->version = readw(&host->reg->hcver);
    	debug("host version = %x\n", host->version);
    
    	/* mask all */
    	writel(0xffffffff, &host->reg->norintstsen);
    	writel(0xffffffff, &host->reg->norintsigen);
    
    	writeb(0xe, &host->reg->timeoutcon);	/* TMCLK * 2^27 */
    	/*
    	 * NORMAL Interrupt Status Enable Register init
    	 * [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
    	 * [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
    
    	 * [3] ENSTADMAINT   : DMA boundary interrupt
    
    	 * [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
    	 * [0] ENSTACMDCMPLT : Command Complete Status Enable
    	*/
    	mask = readl(&host->reg->norintstsen);
    	mask &= ~(0xffff);
    
    	mask |= (TEGRA_MMC_NORINTSTSEN_CMD_COMPLETE |
    		 TEGRA_MMC_NORINTSTSEN_XFER_COMPLETE |
    
    		 TEGRA_MMC_NORINTSTSEN_DMA_INTERRUPT |
    
    		 TEGRA_MMC_NORINTSTSEN_BUFFER_WRITE_READY |
    		 TEGRA_MMC_NORINTSTSEN_BUFFER_READ_READY);
    
    	writel(mask, &host->reg->norintstsen);
    
    	/*
    	 * NORMAL Interrupt Signal Enable Register init
    	 * [1] ENSTACMDCMPLT : Transfer Complete Signal Enable
    	 */
    	mask = readl(&host->reg->norintsigen);
    	mask &= ~(0xffff);
    
    	mask |= TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE;
    
    	writel(mask, &host->reg->norintsigen);
    
    	return 0;
    }
    
    
    int tegra2_mmc_getcd(struct mmc *mmc)
    {
    	struct mmc_host *host = (struct mmc_host *)mmc->priv;
    
    	debug("tegra2_mmc_getcd called\n");
    
    	if (host->cd_gpio >= 0)
    		return !gpio_get_value(host->cd_gpio);
    
    	return 1;
    }
    
    
    int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
    
    	char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
    
    	debug(" tegra2_mmc_init: index %d, bus width %d "
    		"pwr_gpio %d cd_gpio %d\n",
    		dev_index, bus_width, pwr_gpio, cd_gpio);
    
    	host = &mmc_host[dev_index];
    
    	host->clock = 0;
    
    	host->pwr_gpio = pwr_gpio;
    	host->cd_gpio = cd_gpio;
    
    	tegra2_get_setup(host, dev_index);
    
    	clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
    
    
    	if (host->pwr_gpio >= 0) {
    		sprintf(gpusage, "SD/MMC%d PWR", dev_index);
    		gpio_request(host->pwr_gpio, gpusage);
    		gpio_direction_output(host->pwr_gpio, 1);
    	}
    
    	if (host->cd_gpio >= 0) {
    		sprintf(gpusage, "SD/MMC%d CD", dev_index);
    		gpio_request(host->cd_gpio, gpusage);
    		gpio_direction_input(host->cd_gpio);
    	}
    
    
    	mmc = &mmc_dev[dev_index];
    
    	sprintf(mmc->name, "Tegra2 SD/MMC");
    
    	mmc->send_cmd = mmc_send_cmd;
    	mmc->set_ios = mmc_set_ios;
    	mmc->init = mmc_core_init;
    
    	mmc->getcd = tegra2_mmc_getcd;
    
    
    	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
    	if (bus_width == 8)
    		mmc->host_caps = MMC_MODE_8BIT;
    	else
    		mmc->host_caps = MMC_MODE_4BIT;
    
    	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC;
    
    
    	/*
    	 * min freq is for card identification, and is the highest
    	 *  low-speed SDIO card frequency (actually 400KHz)
    	 * max freq is highest HS eMMC clock as per the SD/MMC spec
    	 *  (actually 52MHz)
    	 * Both of these are the closest equivalents w/216MHz source
    	 *  clock and Tegra2 SDMMC divisors.
    	 */
    	mmc->f_min = 375000;
    	mmc->f_max = 48000000;
    
    	mmc_register(mmc);
    
    	return 0;
    }