fdt_support.c

	da = of_read_number(addr, na);

	debug("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n",
	    cp, s, da);

	if (da < cp || da >= (cp + s))
		return OF_BAD_ADDR;
	return da - cp;
}

static int of_bus_default_translate(fdt32_t *addr, u64 offset, int na)
{
	u64 a = of_read_number(addr, na);
	memset(addr, 0, na * 4);
	a += offset;
	if (na > 1)
		addr[na - 2] = cpu_to_fdt32(a >> 32);
	addr[na - 1] = cpu_to_fdt32(a & 0xffffffffu);

	return 0;
}

/* Array of bus specific translators */
static struct of_bus of_busses[] = {
	/* Default */
	{
		.name = "default",
		.addresses = "reg",
		.count_cells = of_bus_default_count_cells,
		.map = of_bus_default_map,
		.translate = of_bus_default_translate,
	},
};

static int of_translate_one(void * blob, int parent, struct of_bus *bus,
			    struct of_bus *pbus, fdt32_t *addr,
			    int na, int ns, int pna, const char *rprop)
{
	const fdt32_t *ranges;
	int rlen;
	int rone;
	u64 offset = OF_BAD_ADDR;

	/* Normally, an absence of a "ranges" property means we are
	 * crossing a non-translatable boundary, and thus the addresses
	 * below the current not cannot be converted to CPU physical ones.
	 * Unfortunately, while this is very clear in the spec, it's not
	 * what Apple understood, and they do have things like /uni-n or
	 * /ht nodes with no "ranges" property and a lot of perfectly
	 * useable mapped devices below them. Thus we treat the absence of
	 * "ranges" as equivalent to an empty "ranges" property which means
	 * a 1:1 translation at that level. It's up to the caller not to try
	 * to translate addresses that aren't supposed to be translated in
	 * the first place. --BenH.
	 */
	ranges = fdt_getprop(blob, parent, rprop, &rlen);
	if (ranges == NULL || rlen == 0) {
		offset = of_read_number(addr, na);
		memset(addr, 0, pna * 4);
		debug("OF: no ranges, 1:1 translation\n");
		goto finish;
	}

	debug("OF: walking ranges...\n");

	/* Now walk through the ranges */
	rlen /= 4;
	rone = na + pna + ns;
	for (; rlen >= rone; rlen -= rone, ranges += rone) {
		offset = bus->map(addr, ranges, na, ns, pna);
		if (offset != OF_BAD_ADDR)
			break;
	}
	if (offset == OF_BAD_ADDR) {
		debug("OF: not found !\n");
		return 1;
	}
	memcpy(addr, ranges + na, 4 * pna);

 finish:
	of_dump_addr("OF: parent translation for:", addr, pna);
	debug("OF: with offset: "PRu64"\n", offset);

	/* Translate it into parent bus space */
	return pbus->translate(addr, offset, pna);
}

/*
 * Translate an address from the device-tree into a CPU physical address,
 * this walks up the tree and applies the various bus mappings on the
 * way.
 *
 * Note: We consider that crossing any level with #size-cells == 0 to mean
 * that translation is impossible (that is we are not dealing with a value
 * that can be mapped to a cpu physical address). This is not really specified
 * that way, but this is traditionally the way IBM at least do things
 */
static u64 __of_translate_address(void *blob, int node_offset, const fdt32_t *in_addr,
				  const char *rprop)
{
	int parent;
	struct of_bus *bus, *pbus;
	fdt32_t addr[OF_MAX_ADDR_CELLS];
	int na, ns, pna, pns;
	u64 result = OF_BAD_ADDR;

	debug("OF: ** translation for device %s **\n",
		fdt_get_name(blob, node_offset, NULL));

	/* Get parent & match bus type */
	parent = fdt_parent_offset(blob, node_offset);
	if (parent < 0)
		goto bail;
	bus = &of_busses[0];

	/* Cound address cells & copy address locally */
	bus->count_cells(blob, parent, &na, &ns);
	if (!OF_CHECK_COUNTS(na, ns)) {
		printf("%s: Bad cell count for %s\n", __FUNCTION__,
		       fdt_get_name(blob, node_offset, NULL));
		goto bail;
	}
	memcpy(addr, in_addr, na * 4);

	debug("OF: bus is %s (na=%d, ns=%d) on %s\n",
	    bus->name, na, ns, fdt_get_name(blob, parent, NULL));
	of_dump_addr("OF: translating address:", addr, na);

	/* Translate */
	for (;;) {
		/* Switch to parent bus */
		node_offset = parent;
		parent = fdt_parent_offset(blob, node_offset);

		/* If root, we have finished */
		if (parent < 0) {
			debug("OF: reached root node\n");
			result = of_read_number(addr, na);
			break;
		}

		/* Get new parent bus and counts */
		pbus = &of_busses[0];
		pbus->count_cells(blob, parent, &pna, &pns);
		if (!OF_CHECK_COUNTS(pna, pns)) {
			printf("%s: Bad cell count for %s\n", __FUNCTION__,
				fdt_get_name(blob, node_offset, NULL));
			break;
		}

		debug("OF: parent bus is %s (na=%d, ns=%d) on %s\n",
		    pbus->name, pna, pns, fdt_get_name(blob, parent, NULL));

		/* Apply bus translation */
		if (of_translate_one(blob, node_offset, bus, pbus,
					addr, na, ns, pna, rprop))
			break;

		/* Complete the move up one level */
		na = pna;
		ns = pns;
		bus = pbus;

		of_dump_addr("OF: one level translation:", addr, na);
	}
 bail:

	return result;
}

u64 fdt_translate_address(void *blob, int node_offset, const fdt32_t *in_addr)
{
	return __of_translate_address(blob, node_offset, in_addr, "ranges");
}

/**
 * fdt_node_offset_by_compat_reg: Find a node that matches compatiable and
 * who's reg property matches a physical cpu address
 *
 * @blob: ptr to device tree
 * @compat: compatiable string to match
 * @compat_off: property name
 *
 */
int fdt_node_offset_by_compat_reg(void *blob, const char *compat,
					phys_addr_t compat_off)
{
	int len, off = fdt_node_offset_by_compatible(blob, -1, compat);
	while (off != -FDT_ERR_NOTFOUND) {
		const fdt32_t *reg = fdt_getprop(blob, off, "reg", &len);
		if (reg) {
			if (compat_off == fdt_translate_address(blob, off, reg))
				return off;
		}
		off = fdt_node_offset_by_compatible(blob, off, compat);
	}

	return -FDT_ERR_NOTFOUND;
}

/**
 * fdt_alloc_phandle: Return next free phandle value
 *
 * @blob: ptr to device tree
 */
int fdt_alloc_phandle(void *blob)
{
	int offset, phandle = 0;

	for (offset = fdt_next_node(blob, -1, NULL); offset >= 0;
	     offset = fdt_next_node(blob, offset, NULL)) {
		phandle = max(phandle, fdt_get_phandle(blob, offset));
	}

	return phandle + 1;
}

/*
 * fdt_set_phandle: Create a phandle property for the given node
 *
 * @fdt: ptr to device tree
 * @nodeoffset: node to update
 * @phandle: phandle value to set (must be unique)
 */
int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle)
{
	int ret;

#ifdef DEBUG
	int off = fdt_node_offset_by_phandle(fdt, phandle);

	if ((off >= 0) && (off != nodeoffset)) {
		char buf[64];

		fdt_get_path(fdt, nodeoffset, buf, sizeof(buf));
		printf("Trying to update node %s with phandle %u ",
		       buf, phandle);

		fdt_get_path(fdt, off, buf, sizeof(buf));
		printf("that already exists in node %s.\n", buf);
		return -FDT_ERR_BADPHANDLE;
	}
#endif

	ret = fdt_setprop_cell(fdt, nodeoffset, "phandle", phandle);
	if (ret < 0)
		return ret;

	/*
	 * For now, also set the deprecated "linux,phandle" property, so that we
	 * don't break older kernels.
	 */
	ret = fdt_setprop_cell(fdt, nodeoffset, "linux,phandle", phandle);

	return ret;
}

/*
 * fdt_create_phandle: Create a phandle property for the given node
 *
 * @fdt: ptr to device tree
 * @nodeoffset: node to update
 */
unsigned int fdt_create_phandle(void *fdt, int nodeoffset)
{
	/* see if there is a phandle already */
	int phandle = fdt_get_phandle(fdt, nodeoffset);

	/* if we got 0, means no phandle so create one */
	if (phandle == 0) {
		int ret;

		phandle = fdt_alloc_phandle(fdt);
		ret = fdt_set_phandle(fdt, nodeoffset, phandle);
		if (ret < 0) {
			printf("Can't set phandle %u: %s\n", phandle,
			       fdt_strerror(ret));
			return 0;
		}
	}

	return phandle;
}

/*
 * fdt_set_node_status: Set status for the given node
 *
 * @fdt: ptr to device tree
 * @nodeoffset: node to update
 * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
 *	    FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
 * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
 */
int fdt_set_node_status(void *fdt, int nodeoffset,
			enum fdt_status status, unsigned int error_code)
{
	char buf[16];
	int ret = 0;

	if (nodeoffset < 0)
		return nodeoffset;

	switch (status) {
	case FDT_STATUS_OKAY:
		ret = fdt_setprop_string(fdt, nodeoffset, "status", "okay");
		break;
	case FDT_STATUS_DISABLED:
		ret = fdt_setprop_string(fdt, nodeoffset, "status", "disabled");
		break;
	case FDT_STATUS_FAIL:
		ret = fdt_setprop_string(fdt, nodeoffset, "status", "fail");
		break;
	case FDT_STATUS_FAIL_ERROR_CODE:
		sprintf(buf, "fail-%d", error_code);
		ret = fdt_setprop_string(fdt, nodeoffset, "status", buf);
		break;
	default:
		printf("Invalid fdt status: %x\n", status);
		ret = -1;
		break;
	}

	return ret;
}

/*
 * fdt_set_status_by_alias: Set status for the given node given an alias
 *
 * @fdt: ptr to device tree
 * @alias: alias of node to update
 * @status: FDT_STATUS_OKAY, FDT_STATUS_DISABLED,
 *	    FDT_STATUS_FAIL, FDT_STATUS_FAIL_ERROR_CODE
 * @error_code: optional, only used if status is FDT_STATUS_FAIL_ERROR_CODE
 */
int fdt_set_status_by_alias(void *fdt, const char* alias,
			    enum fdt_status status, unsigned int error_code)
{
	int offset = fdt_path_offset(fdt, alias);

	return fdt_set_node_status(fdt, offset, status, error_code);
}

#if defined(CONFIG_VIDEO) || defined(CONFIG_LCD)
int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf)
{
	int noff;
	int ret;

	noff = fdt_node_offset_by_compatible(blob, -1, compat);
	if (noff != -FDT_ERR_NOTFOUND) {
		debug("%s: %s\n", fdt_get_name(blob, noff, 0), compat);
add_edid:
		ret = fdt_setprop(blob, noff, "edid", edid_buf, 128);
		if (ret == -FDT_ERR_NOSPACE) {
			ret = fdt_increase_size(blob, 512);
			if (!ret)
				goto add_edid;
			else
				goto err_size;
		} else if (ret < 0) {
			printf("Can't add property: %s\n", fdt_strerror(ret));
			return ret;
		}
	}
	return 0;
err_size:
	printf("Can't increase blob size: %s\n", fdt_strerror(ret));
	return ret;
}
#endif

/*
 * Verify the physical address of device tree node for a given alias
 *
 * This function locates the device tree node of a given alias, and then
 * verifies that the physical address of that device matches the given
 * parameter.  It displays a message if there is a mismatch.
 *
 * Returns 1 on success, 0 on failure
 */
int fdt_verify_alias_address(void *fdt, int anode, const char *alias, u64 addr)
{
	const char *path;
	const fdt32_t *reg;
	int node, len;
	u64 dt_addr;

	path = fdt_getprop(fdt, anode, alias, NULL);
	if (!path) {
		/* If there's no such alias, then it's not a failure */
		return 1;
	}

	node = fdt_path_offset(fdt, path);
	if (node < 0) {
		printf("Warning: device tree alias '%s' points to invalid "
		       "node %s.\n", alias, path);
		return 0;
	}

	reg = fdt_getprop(fdt, node, "reg", &len);
	if (!reg) {
		printf("Warning: device tree node '%s' has no address.\n",
		       path);
		return 0;
	}

	dt_addr = fdt_translate_address(fdt, node, reg);
	if (addr != dt_addr) {
		printf("Warning: U-Boot configured device %s at address %llx,\n"
		       " but the device tree has it address %llx.\n",
		       alias, addr, dt_addr);
		return 0;
	}

	return 1;
}

/*
 * Returns the base address of an SOC or PCI node
 */
u64 fdt_get_base_address(void *fdt, int node)
{
	int size;
	u32 naddr;
	const fdt32_t *prop;

	prop = fdt_getprop(fdt, node, "#address-cells", &size);
	if (prop && size == 4)
		naddr = be32_to_cpup(prop);
	else
		naddr = 2;

	prop = fdt_getprop(fdt, node, "ranges", &size);

	return prop ? fdt_translate_address(fdt, node, prop + naddr) : 0;
}