Newer
Older
/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* based on a the Linux rtc-x1207.c driver which is:
* Copyright 2004 Karen Spearel
* Copyright 2005 Alessandro Zummo
*
* Information and datasheet:
* http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Date & Time support for Xicor/Intersil X1205 RTC
*/
/* #define DEBUG */
#include <common.h>
#include <command.h>
#include <rtc.h>
#include <i2c.h>
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
#define CCR_SEC 0
#define CCR_MIN 1
#define CCR_HOUR 2
#define CCR_MDAY 3
#define CCR_MONTH 4
#define CCR_YEAR 5
#define CCR_WDAY 6
#define CCR_Y2K 7
#define X1205_REG_SR 0x3F /* status register */
#define X1205_REG_Y2K 0x37
#define X1205_REG_DW 0x36
#define X1205_REG_YR 0x35
#define X1205_REG_MO 0x34
#define X1205_REG_DT 0x33
#define X1205_REG_HR 0x32
#define X1205_REG_MN 0x31
#define X1205_REG_SC 0x30
#define X1205_REG_DTR 0x13
#define X1205_REG_ATR 0x12
#define X1205_REG_INT 0x11
#define X1205_REG_0 0x10
#define X1205_REG_Y2K1 0x0F
#define X1205_REG_DWA1 0x0E
#define X1205_REG_YRA1 0x0D
#define X1205_REG_MOA1 0x0C
#define X1205_REG_DTA1 0x0B
#define X1205_REG_HRA1 0x0A
#define X1205_REG_MNA1 0x09
#define X1205_REG_SCA1 0x08
#define X1205_REG_Y2K0 0x07
#define X1205_REG_DWA0 0x06
#define X1205_REG_YRA0 0x05
#define X1205_REG_MOA0 0x04
#define X1205_REG_DTA0 0x03
#define X1205_REG_HRA0 0x02
#define X1205_REG_MNA0 0x01
#define X1205_REG_SCA0 0x00
#define X1205_CCR_BASE 0x30 /* Base address of CCR */
#define X1205_ALM0_BASE 0x00 /* Base address of ALARM0 */
#define X1205_SR_RTCF 0x01 /* Clock failure */
#define X1205_SR_WEL 0x02 /* Write Enable Latch */
#define X1205_SR_RWEL 0x04 /* Register Write Enable */
#define X1205_DTR_DTR0 0x01
#define X1205_DTR_DTR1 0x02
#define X1205_DTR_DTR2 0x04
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
static void rtc_write(int reg, u8 val)
{
i2c_write(CONFIG_SYS_I2C_RTC_ADDR, reg, 2, &val, 1);
}
/*
* In the routines that deal directly with the x1205 hardware, we use
* rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch
* Epoch is initialized as 2000. Time is set to UTC.
*/
i2c_read(CONFIG_SYS_I2C_RTC_ADDR, X1205_CCR_BASE, 2, buf, 8);
debug("%s: raw read data - sec=%02x, min=%02x, hr=%02x, "
"mday=%02x, mon=%02x, year=%02x, wday=%02x, y2k=%02x\n",
__FUNCTION__,
buf[0], buf[1], buf[2], buf[3],
buf[4], buf[5], buf[6], buf[7]);
tm->tm_sec = bcd2bin(buf[CCR_SEC]);
tm->tm_min = bcd2bin(buf[CCR_MIN]);
tm->tm_hour = bcd2bin(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */
tm->tm_mday = bcd2bin(buf[CCR_MDAY]);
tm->tm_mon = bcd2bin(buf[CCR_MONTH]); /* mon is 0-11 */
tm->tm_year = bcd2bin(buf[CCR_YEAR])
+ (bcd2bin(buf[CCR_Y2K]) * 100);
tm->tm_wday = buf[CCR_WDAY];
debug("%s: tm is secs=%d, mins=%d, hours=%d, "
"mday=%d, mon=%d, year=%d, wday=%d\n",
__FUNCTION__,
tm->tm_sec, tm->tm_min, tm->tm_hour,
tm->tm_mday, tm->tm_mon, tm->tm_year, tm->tm_wday);
Jean-Christophe PLAGNIOL-VILLARD
committed
int rtc_set(struct rtc_time *tm)
{
int i;
u8 buf[8];
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
buf[CCR_SEC] = bin2bcd(tm->tm_sec);
buf[CCR_MIN] = bin2bcd(tm->tm_min);
/* set hour and 24hr bit */
buf[CCR_HOUR] = bin2bcd(tm->tm_hour) | X1205_HR_MIL;
buf[CCR_MDAY] = bin2bcd(tm->tm_mday);
buf[CCR_MONTH] = bin2bcd(tm->tm_mon);
/* year, since the rtc epoch*/
buf[CCR_YEAR] = bin2bcd(tm->tm_year % 100);
buf[CCR_WDAY] = tm->tm_wday & 0x07;
buf[CCR_Y2K] = bin2bcd(tm->tm_year / 100);
/* this sequence is required to unlock the chip */
rtc_write(X1205_REG_SR, X1205_SR_WEL);
rtc_write(X1205_REG_SR, X1205_SR_WEL | X1205_SR_RWEL);
/* write register's data */
for (i = 0; i < 8; i++)
rtc_write(X1205_CCR_BASE + i, buf[i]);
rtc_write(X1205_REG_SR, 0);
Jean-Christophe PLAGNIOL-VILLARD
committed
return 0;