nitrogen8m_som.c

/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 * Copyright 2017-2018 NXP
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <malloc.h>
#include <errno.h>
#include <asm/io.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/mach-imx/boot_mode.h>
#include <asm/mach-imx/fbpanel.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm-generic/gpio.h>
#include <fsl_esdhc_imx.h>
#include <mmc.h>
#include <asm/arch/imx8mq_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-imx/gpio.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/arch/clock.h>
#include <asm/mach-imx/video.h>
#include <video_fb.h>
#include <spl.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <dm.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <linux/usb/dwc3.h>
#include "../common/padctrl.h"
#include "../common/bd_common.h"

DECLARE_GLOBAL_DATA_PTR;

static iomux_v3_cfg_t const init_pads[] = {
	IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
	IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
	IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
#define GP_LCM_JM430_BKL_EN		IMX_GPIO_NR(1, 1)
#define GP_LTK08_MIPI_EN		IMX_GPIO_NR(1, 1)
	IMX8MQ_PAD_GPIO1_IO01__GPIO1_IO1 | MUX_PAD_CTRL(0x16),

#define GPIRQ_GT911 			IMX_GPIO_NR(3, 12)
	IMX8MQ_PAD_NAND_DATA06__GPIO3_IO12 | MUX_PAD_CTRL(0xd6),
#define GP_GT911_RESET			IMX_GPIO_NR(3, 13)
#define GP_ST1633_RESET			IMX_GPIO_NR(3, 13)
	IMX8MQ_PAD_NAND_DATA07__GPIO3_IO13 | MUX_PAD_CTRL(0x49),

#define GP_ARM_DRAM_VSEL		IMX_GPIO_NR(3, 24)
	IMX8MQ_PAD_SAI5_RXD3__GPIO3_IO24 | MUX_PAD_CTRL(0x16),
#define GP_DRAM_1P1_VSEL		IMX_GPIO_NR(2, 11)
	IMX8MQ_PAD_SD1_STROBE__GPIO2_IO11 | MUX_PAD_CTRL(0x16),
#define GP_SOC_GPU_VPU_VSEL		IMX_GPIO_NR(2, 20)
	IMX8MQ_PAD_SD2_WP__GPIO2_IO20 | MUX_PAD_CTRL(0x16),

#define GP_FASTBOOT_KEY			IMX_GPIO_NR(1, 7)
	IMX8MQ_PAD_GPIO1_IO07__GPIO1_IO7 | MUX_PAD_CTRL(WEAK_PULLUP),

#define GP_I2C1_PCA9546_RESET		IMX_GPIO_NR(1, 4)
	IMX8MQ_PAD_GPIO1_IO04__GPIO1_IO4 | MUX_PAD_CTRL(0x46),

#define GP_TC358762_EN			IMX_GPIO_NR(3, 15)
#define GP_I2C1D_SN65DSI83_EN		IMX_GPIO_NR(3, 15)
#define GP_MIPI_RESET			IMX_GPIO_NR(3, 15)
	IMX8MQ_PAD_NAND_RE_B__GPIO3_IO15 | MUX_PAD_CTRL(0x6),


#define GP_EMMC_RESET			IMX_GPIO_NR(2, 10)
	IMX8MQ_PAD_SD1_RESET_B__GPIO2_IO10 | MUX_PAD_CTRL(0x41),

#define GP_CSI1_MIPI_PWDN		IMX_GPIO_NR(3, 3)
	IMX8MQ_PAD_NAND_CE2_B__GPIO3_IO3 | MUX_PAD_CTRL(0x61),
#define GP_CSI1_MIPI_RESET		IMX_GPIO_NR(3, 17)
	IMX8MQ_PAD_NAND_WE_B__GPIO3_IO17 | MUX_PAD_CTRL(0x61),

#define GP_CSI2_MIPI_PWDN		IMX_GPIO_NR(3, 2)
	IMX8MQ_PAD_NAND_CE1_B__GPIO3_IO2 | MUX_PAD_CTRL(0x61),
#define GP_CSI2_MIPI_RESET		IMX_GPIO_NR(2, 19)
	IMX8MQ_PAD_SD2_RESET_B__GPIO2_IO19 |MUX_PAD_CTRL(0x61),
#ifdef CONFIG_FEC_MXC
	IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, PAD_CTRL_ENET_MDIO),
	IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, PAD_CTRL_ENET_MDC),
	IOMUX_PAD_CTRL(ENET_TX_CTL__ENET_RGMII_TX_CTL, PAD_CTRL_ENET_TX),
	IOMUX_PAD_CTRL(ENET_TD0__ENET_RGMII_TD0, PAD_CTRL_ENET_TX),
	IOMUX_PAD_CTRL(ENET_TD1__ENET_RGMII_TD1, PAD_CTRL_ENET_TX),
	IOMUX_PAD_CTRL(ENET_TD2__ENET_RGMII_TD2, PAD_CTRL_ENET_TX),
	IOMUX_PAD_CTRL(ENET_TD3__ENET_RGMII_TD3, PAD_CTRL_ENET_TX),
	IOMUX_PAD_CTRL(ENET_TXC__ENET_RGMII_TXC, PAD_CTRL_ENET_TX),
#endif
#define GP_RGMII_PHY_RESET	IMX_GPIO_NR(1, 9)
	IOMUX_PAD_CTRL(GPIO1_IO09__GPIO1_IO9, WEAK_PULLUP),
#define GPIRQ_ENET_PHY		IMX_GPIO_NR(1, 2)
	IOMUX_PAD_CTRL(GPIO1_IO11__GPIO1_IO11, WEAK_PULLUP),
};

int board_early_init_f(void)
{
	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;

	imx_iomux_v3_setup_multiple_pads(init_pads, ARRAY_SIZE(init_pads));
	set_wdog_reset(wdog);

	gpio_direction_output(GP_ARM_DRAM_VSEL, 0);
	gpio_direction_output(GP_DRAM_1P1_VSEL, 0);
	gpio_direction_output(GP_SOC_GPU_VPU_VSEL, 0);
	gpio_direction_output(GP_EMMC_RESET, 1);
	gpio_direction_output(GP_I2C1_PCA9546_RESET, 0);
	gpio_direction_output(GP_I2C1D_SN65DSI83_EN, 0);
	gpio_direction_output(GP_CSI1_MIPI_PWDN, 1);
	gpio_direction_output(GP_CSI1_MIPI_RESET, 0);
	gpio_direction_output(GP_CSI2_MIPI_PWDN, 1);
	gpio_direction_output(GP_CSI2_MIPI_RESET, 0);

	return 0;
}

#ifdef CONFIG_BOARD_POSTCLK_INIT
int board_postclk_init(void)
{
	/* TODO */
	return 0;
}
#endif

#define MAX_LOW_SIZE	(0x100000000ULL - CONFIG_SYS_SDRAM_BASE)
#define SDRAM_SIZE	((1ULL * CONFIG_DDR_MB) << 20)

#if SDRAM_SIZE > MAX_LOW_SIZE
#define MEM_SIZE	MAX_LOW_SIZE
#else
#define MEM_SIZE	SDRAM_SIZE
#endif

int dram_init_banksize(void)
{
	gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
	gd->bd->bi_dram[0].size = SDRAM_SIZE;
	return 0;
}

int dram_init(void)
{
	/* rom_pointer[1] contains the size of TEE occupies */
	gd->ram_size = MEM_SIZE - rom_pointer[1];
	return 0;
}

#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
	return 0;
}
#endif


#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_IMX8M)

#define USB_PHY_CTRL0			0xF0040
#define USB_PHY_CTRL0_REF_SSP_EN	BIT(2)

#define USB_PHY_CTRL1			0xF0044
#define USB_PHY_CTRL1_RESET		BIT(0)
#define USB_PHY_CTRL1_COMMONONN		BIT(1)
#define USB_PHY_CTRL1_ATERESET		BIT(3)
#define USB_PHY_CTRL1_VDATSRCENB0	BIT(19)
#define USB_PHY_CTRL1_VDATDETENB0	BIT(20)

#define USB_PHY_CTRL2			0xF0048
#define USB_PHY_CTRL2_TXENABLEN0	BIT(8)

static struct dwc3_device dwc3_device_data = {
	.maximum_speed = USB_SPEED_SUPER,
	.base = USB1_BASE_ADDR,
	.dr_mode = USB_DR_MODE_PERIPHERAL,
	.index = 0,
//	.power_down_scale = 2,
};

int usb_gadget_handle_interrupts(void)
{
	dwc3_uboot_handle_interrupt(0);
	return 0;
}

static void dwc3_nxp_usb_phy_init(struct dwc3_device *dwc3)
{
	struct dwc3 *dwc3_reg = (struct dwc3 *)(dwc3->base + DWC3_REG_OFFSET);
	u32 val;

	val = readl(dwc3->base + USB_PHY_CTRL1);
	val &= ~(USB_PHY_CTRL1_VDATSRCENB0 | USB_PHY_CTRL1_VDATDETENB0 |
			USB_PHY_CTRL1_COMMONONN);
	val |= USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET;
	writel(val, dwc3->base + USB_PHY_CTRL1);

	val = readl(dwc3->base + USB_PHY_CTRL0);
	val |= USB_PHY_CTRL0_REF_SSP_EN;
	writel(val, dwc3->base + USB_PHY_CTRL0);

	val = readl(dwc3->base + USB_PHY_CTRL2);
	val |= USB_PHY_CTRL2_TXENABLEN0;
	writel(val, dwc3->base + USB_PHY_CTRL2);

	val = readl(dwc3->base + USB_PHY_CTRL1);
	val &= ~(USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET);
	writel(val, dwc3->base + USB_PHY_CTRL1);

	val = readl(&dwc3_reg->g_ctl);
	val &= ~(DWC3_GCTL_PWRDNSCALE_MASK);
	val |= DWC3_GCTL_PWRDNSCALE(2);

	writel(val, &dwc3_reg->g_ctl);
}
#endif

#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_IMX8M)
int board_usb_init(int index, enum usb_init_type init)
{
	int ret = 0;
	imx8m_usb_power(index, true);

	if (index == 0 && init == USB_INIT_DEVICE) {
		dwc3_nxp_usb_phy_init(&dwc3_device_data);
		return dwc3_uboot_init(&dwc3_device_data);
	} else if (index == 0 && init == USB_INIT_HOST) {
		return ret;
	}

	if (index == 1) {
		/* Release HUB reset */
#define GP_USB1_HUB_RESET	IMX_GPIO_NR(1, 14)
		imx_iomux_v3_setup_pad(IMX8MQ_PAD_GPIO1_IO14__GPIO1_IO14 |
				       MUX_PAD_CTRL(WEAK_PULLUP));
		gpio_request(GP_USB1_HUB_RESET, "usb1_rst");
		gpio_direction_output(GP_USB1_HUB_RESET, 1);
	}

	return 0;
}

int board_usb_cleanup(int index, enum usb_init_type init)
{
	int ret = 0;
	if (index == 0 && init == USB_INIT_DEVICE)
		dwc3_uboot_exit(index);

	imx8m_usb_power(index, false);

	return ret;
}
#endif

#ifdef CONFIG_CMD_FBPANEL

int board_detect_hdmi(struct display_info_t const *di)
{
  printf("board_detect_hdmi()");
	return hdmi_hpd_status() ? 1 : 0;
}

// TODO: port internal MIPI DSI -> eDP display
static const struct display_info_t displays[] = {
	VD_1920_1080M_60(HDMI, board_detect_hdmi, 0, 0x50)
};

#define display_cnt	ARRAY_SIZE(displays)
#else
#define displays	NULL
#define display_cnt	0
#endif

int board_init(void)
{
	return 0;
}

// FIXME Reform: ideally we would save the env on the SD card, not the eMMC
// but setting this to 1 crashes u-boot
int board_mmc_get_env_dev(int devno)
{
	return 0;
}

#if defined(CONFIG_CMD_FASTBOOT) || defined(CONFIG_CMD_DFU)
extern void imx_get_mac_from_fuse(int dev_id, unsigned char *mac);
static void addserial_env(const char* env_var)
{
	unsigned char mac_address[8];
	char serialbuf[20];

	if (!env_get(env_var)) {
		imx_get_mac_from_fuse(0, mac_address);
		snprintf(serialbuf, sizeof(serialbuf), "%02x%02x%02x%02x%02x%02x",
			 mac_address[0], mac_address[1], mac_address[2],
			 mac_address[3], mac_address[4], mac_address[5]);
		env_set(env_var, serialbuf);
	}
}
#endif

#ifdef CONFIG_CMD_BMODE
const struct boot_mode board_boot_modes[] = {
        /* 4 bit bus width */
	{"emmc0",	MAKE_CFGVAL(0x22, 0x20, 0x00, 0x10)},
        {NULL,          0},
};
#endif

static int fastboot_key_pressed(void)
{
	//gpio_request(GP_FASTBOOT_KEY, "fastboot_key");
	//gpio_direction_input(GP_FASTBOOT_KEY);
	//return !gpio_get_value(GP_FASTBOOT_KEY);
  return 0;
}

void board_late_mmc_env_init(void);
void init_usb_clk(int usbno);

static void set_env_vars(void)
{
  printf("set_env_vars()");
	env_set("board", "MNT Reform 2.0"); // "nitrogen8m_som");
	env_set("soc", "imx8mq");
	env_set("imx_cpu", get_imx_type((get_cpu_rev() & 0xFF000) >> 12));
	env_set("uboot_defconfig", CONFIG_DEFCONFIG);

  // MNT Reform 2
  env_set("fdt_addr", "0x50000000");
  env_set("bootargs", "noinitrd root=/dev/mmcblk1p1 rootwait rw console=ttymxc0,115200 cma=512M no_console_suspend pci=nomsi");
  env_set("bootcmd", "ext4load mmc 1 ${loadaddr} /Image; ext4load mmc 1 ${fdt_addr} /imx8mq-mnt-reform2.dtb; booti ${loadaddr} - ${fdt_addr}");
}

void board_set_default_env(void)
{
	set_env_vars();
#ifdef CONFIG_CMD_FBPANEL
	fbp_setup_env_cmds();
#endif
	board_eth_addresses();
}

int board_late_init(void)
{
	set_env_vars();
#if defined(CONFIG_USB_FUNCTION_FASTBOOT) || defined(CONFIG_CMD_DFU)
	addserial_env("serial#");
	if (fastboot_key_pressed()) {
		printf("Starting fastboot...\n");
		env_set("preboot", "fastboot 0");
	}
#endif
#ifdef CONFIG_ENV_IS_IN_MMC
	board_late_mmc_env_init();
#endif
#ifdef CONFIG_CMD_BMODE
	add_board_boot_modes(board_boot_modes);
#endif
	init_usb_clk(0);
	init_usb_clk(1);
	return 0;
}