Skip to content
Snippets Groups Projects
image-sparse.c 7.89 KiB
Newer Older
  • Learn to ignore specific revisions
  • /*
     * Copyright (c) 2009, Google Inc.
     * All rights reserved.
     *
     * Copyright (c) 2009-2014, The Linux Foundation. All rights reserved.
    
     * Portions Copyright 2014 Broadcom Corporation.
    
     *
     * Redistribution and use in source and binary forms, with or without
     * modification, are permitted provided that the following conditions are met:
     *     * Redistributions of source code must retain the above copyright
     *       notice, this list of conditions and the following disclaimer.
     *     * Redistributions in binary form must reproduce the above copyright
     *       notice, this list of conditions and the following disclaimer in the
     *       documentation and/or other materials provided with the distribution.
     *     * Neither the name of The Linux Foundation nor
     *       the names of its contributors may be used to endorse or promote
     *       products derived from this software without specific prior written
     *       permission.
     *
     * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
     * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     * IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
     * NON-INFRINGEMENT ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
     * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
     * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
     * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
     * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
     * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     *
    
     * NOTE:
     *   Although it is very similar, this license text is not identical
     *   to the "BSD-3-Clause", therefore, DO NOT MODIFY THIS LICENSE TEXT!
    
    #include <config.h>
    #include <common.h>
    
    #include <image-sparse.h>
    
    #include <malloc.h>
    #include <part.h>
    #include <sparse_format.h>
    
    
    #include <linux/math64.h>
    
    
    static void default_log(const char *ignored, char *response) {}
    
    
    int write_sparse_image(struct sparse_storage *info,
    
    		       const char *part_name, void *data, char *response)
    
    	lbaint_t blk;
    	lbaint_t blkcnt;
    	lbaint_t blks;
    	uint32_t bytes_written = 0;
    	unsigned int chunk;
    	unsigned int offset;
    	unsigned int chunk_data_sz;
    	uint32_t *fill_buf = NULL;
    	uint32_t fill_val;
    	sparse_header_t *sparse_header;
    	chunk_header_t *chunk_header;
    	uint32_t total_blocks = 0;
    
    	fill_buf_num_blks = CONFIG_IMAGE_SPARSE_FILLBUF_SIZE / info->blksz;
    
    	/* Read and skip over sparse image header */
    
    	sparse_header = (sparse_header_t *)data;
    
    	data += sparse_header->file_hdr_sz;
    	if (sparse_header->file_hdr_sz > sizeof(sparse_header_t)) {
    		/*
    		 * Skip the remaining bytes in a header that is longer than
    		 * we expected.
    		 */
    		data += (sparse_header->file_hdr_sz - sizeof(sparse_header_t));
    	}
    
    	if (!info->mssg)
    		info->mssg = default_log;
    
    
    	debug("=== Sparse Image Header ===\n");
    	debug("magic: 0x%x\n", sparse_header->magic);
    	debug("major_version: 0x%x\n", sparse_header->major_version);
    	debug("minor_version: 0x%x\n", sparse_header->minor_version);
    	debug("file_hdr_sz: %d\n", sparse_header->file_hdr_sz);
    	debug("chunk_hdr_sz: %d\n", sparse_header->chunk_hdr_sz);
    	debug("blk_sz: %d\n", sparse_header->blk_sz);
    	debug("total_blks: %d\n", sparse_header->total_blks);
    	debug("total_chunks: %d\n", sparse_header->total_chunks);
    
    
    	/*
    	 * Verify that the sparse block size is a multiple of our
    	 * storage backend block size
    	 */
    
    	div_u64_rem(sparse_header->blk_sz, info->blksz, &offset);
    
    	if (offset) {
    
    		printf("%s: Sparse image block size issue [%u]\n",
    		       __func__, sparse_header->blk_sz);
    
    		info->mssg("sparse image block size issue", response);
    
    	puts("Flashing Sparse Image\n");
    
    	/* Start processing chunks */
    
    	for (chunk = 0; chunk < sparse_header->total_chunks; chunk++) {
    
    		/* Read and skip over chunk header */
    		chunk_header = (chunk_header_t *)data;
    		data += sizeof(chunk_header_t);
    
    		if (chunk_header->chunk_type != CHUNK_TYPE_RAW) {
    			debug("=== Chunk Header ===\n");
    			debug("chunk_type: 0x%x\n", chunk_header->chunk_type);
    			debug("chunk_data_sz: 0x%x\n", chunk_header->chunk_sz);
    			debug("total_size: 0x%x\n", chunk_header->total_sz);
    
    		if (sparse_header->chunk_hdr_sz > sizeof(chunk_header_t)) {
    			/*
    			 * Skip the remaining bytes in a header that is longer
    			 * than we expected.
    			 */
    			data += (sparse_header->chunk_hdr_sz -
    				 sizeof(chunk_header_t));
    
    		chunk_data_sz = sparse_header->blk_sz * chunk_header->chunk_sz;
    		blkcnt = chunk_data_sz / info->blksz;
    		switch (chunk_header->chunk_type) {
    		case CHUNK_TYPE_RAW:
    			if (chunk_header->total_sz !=
    			    (sparse_header->chunk_hdr_sz + chunk_data_sz)) {
    
    				info->mssg("Bogus chunk size for chunk type Raw",
    					   response);
    
    			}
    
    			if (blk + blkcnt > info->start + info->size) {
    				printf(
    				    "%s: Request would exceed partition size!\n",
    				    __func__);
    
    				info->mssg("Request would exceed partition size!",
    					   response);
    
    			blks = info->write(info, blk, blkcnt, data);
    			/* blks might be > blkcnt (eg. NAND bad-blocks) */
    			if (blks < blkcnt) {
    				printf("%s: %s" LBAFU " [" LBAFU "]\n",
    				       __func__, "Write failed, block #",
    				       blk, blks);
    
    				info->mssg("flash write failure", response);
    
    			}
    			blk += blks;
    			bytes_written += blkcnt * info->blksz;
    			total_blocks += chunk_header->chunk_sz;
    			data += chunk_data_sz;
    			break;
    
    		case CHUNK_TYPE_FILL:
    			if (chunk_header->total_sz !=
    			    (sparse_header->chunk_hdr_sz + sizeof(uint32_t))) {
    
    				info->mssg("Bogus chunk size for chunk type FILL", response);
    
    			fill_buf = (uint32_t *)
    				   memalign(ARCH_DMA_MINALIGN,
    
    					    ROUNDUP(
    						info->blksz * fill_buf_num_blks,
    						ARCH_DMA_MINALIGN));
    
    				info->mssg("Malloc failed for: CHUNK_TYPE_FILL",
    					   response);
    
    			fill_val = *(uint32_t *)data;
    			data = (char *)data + sizeof(uint32_t);
    
    			for (i = 0;
    			     i < (info->blksz * fill_buf_num_blks /
    				  sizeof(fill_val));
    			     i++)
    
    				fill_buf[i] = fill_val;
    
    			if (blk + blkcnt > info->start + info->size) {
    				printf(
    				    "%s: Request would exceed partition size!\n",
    				    __func__);
    
    				info->mssg("Request would exceed partition size!",
    					   response);
    
    			for (i = 0; i < blkcnt;) {
    				j = blkcnt - i;
    				if (j > fill_buf_num_blks)
    					j = fill_buf_num_blks;
    				blks = info->write(info, blk, j, fill_buf);
    				/* blks might be > j (eg. NAND bad-blocks) */
    				if (blks < j) {
    					printf("%s: %s " LBAFU " [%d]\n",
    					       __func__,
    					       "Write failed, block #",
    					       blk, j);
    
    					info->mssg("flash write failure",
    						   response);
    
    			}
    			bytes_written += blkcnt * info->blksz;
    			total_blocks += chunk_data_sz / sparse_header->blk_sz;
    			free(fill_buf);
    			break;
    
    		case CHUNK_TYPE_DONT_CARE:
    
    			blk += info->reserve(info, blk, blkcnt);
    
    			total_blocks += chunk_header->chunk_sz;
    			break;
    
    		case CHUNK_TYPE_CRC32:
    			if (chunk_header->total_sz !=
    			    sparse_header->chunk_hdr_sz) {
    
    				info->mssg("Bogus chunk size for chunk type Dont Care",
    					   response);
    
    			}
    			total_blocks += chunk_header->chunk_sz;
    			data += chunk_data_sz;
    			break;
    
    		default:
    			printf("%s: Unknown chunk type: %x\n", __func__,
    			       chunk_header->chunk_type);
    
    			info->mssg("Unknown chunk type", response);
    
    	debug("Wrote %d blocks, expected to write %d blocks\n",
    
    	      total_blocks, sparse_header->total_blks);
    	printf("........ wrote %u bytes to '%s'\n", bytes_written, part_name);
    
    	if (total_blocks != sparse_header->total_blks) {
    
    		info->mssg("sparse image write failure", response);