Newer
Older
/* ax88180.h: ASIX AX88180 Non-PCI Gigabit Ethernet u-boot driver */
/*
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
*/
#ifndef _AX88180_H_
#define _AX88180_H_
#include <asm/types.h>
#include <config.h>
typedef enum _ax88180_link_state {
INS_LINK_DOWN,
INS_LINK_UP,
INS_LINK_UNKNOWN
} ax88180_link_state;
struct ax88180_private {
unsigned char BusWidth;
unsigned char PadSize;
unsigned short PhyAddr;
unsigned short PhyID0;
unsigned short FirstTxDesc;
unsigned short NextTxDesc;
ax88180_link_state LinkState;
};
#define BUS_WIDTH_16 1
#define BUS_WIDTH_32 2
#define ENABLE_JUMBO 1
#define DISABLE_JUMBO 0
#define ENABLE_BURST 1
#define DISABLE_BURST 0
#define NORMAL_RX_MODE 0
#define RX_LOOPBACK_MODE 1
#define RX_INIFINIT_LOOP_MODE 2
#define TX_INIFINIT_LOOP_MODE 3
#define DEFAULT_ETH_MTU 1500
/* Jumbo packet size 4086 bytes included 4 bytes CRC*/
#define MAX_JUMBO_MTU 4072
/* Max Tx Jumbo size 4086 bytes included 4 bytes CRC */
#define MAX_TX_JUMBO_SIZE 4086
/* Max Rx Jumbo size is 15K Bytes */
#define MAX_RX_SIZE 0x3C00
#define MARVELL_ALASKA_PHYSID0 0x141
#define MARVELL_88E1118_PHYSID1 0xE40
#define CICADA_CIS8201_PHYSID0 0x000F
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
#define MEDIA_AUTO 0
#define MEDIA_1000FULL 1
#define MEDIA_1000HALF 2
#define MEDIA_100FULL 3
#define MEDIA_100HALF 4
#define MEDIA_10FULL 5
#define MEDIA_10HALF 6
#define MEDIA_UNKNOWN 7
#define AUTO_MEDIA 0
#define FORCE_MEDIA 1
#define TXDP_MASK 3
#define TXDP0 0
#define TXDP1 1
#define TXDP2 2
#define TXDP3 3
#define CMD_MAP_SIZE 0x100
#if defined (CONFIG_DRIVER_AX88180_16BIT)
#define AX88180_MEMORY_SIZE 0x00004000
#define START_BASE 0x1000
#define RX_BUF_SIZE 0x1000
#define TX_BUF_SIZE 0x0F00
#define TX_BASE START_BASE
#define CMD_BASE (TX_BASE + TX_BUF_SIZE)
#define RX_BASE (CMD_BASE + CMD_MAP_SIZE)
#else
#define AX88180_MEMORY_SIZE 0x00010000
#define RX_BUF_SIZE 0x8000
#define TX_BUF_SIZE 0x7C00
#define RX_BASE 0x0000
#define TX_BASE (RX_BASE + RX_BUF_SIZE)
#define CMD_BASE (TX_BASE + TX_BUF_SIZE)
#endif
/* AX88180 Memory Mapping Definition */
#define RXBUFFER_START RX_BASE
#define RX_PACKET_LEN_OFFSET 0
#define RX_PAGE_NUM_MASK 0x7FF /* RX pages 0~7FFh */
#define TXBUFFER_START TX_BASE
/* AX88180 MAC Register Definition */
#define DECODE (0)
#define DECODE_EN 0x00000001
#define BASE (6)
#define CMD (CMD_BASE + 0x0000)
#define WAKEMOD 0x00000001
#define TXEN 0x00000100
#define RXEN 0x00000200
#define DEFAULT_CMD WAKEMOD
#define IMR (CMD_BASE + 0x0004)
#define IMR_RXBUFFOVR 0x00000001
#define IMR_WATCHDOG 0x00000002
#define IMR_TX 0x00000008
#define IMR_RX 0x00000010
#define IMR_PHY 0x00000020
#define CLEAR_IMR 0x00000000
#define DEFAULT_IMR (IMR_PHY | IMR_RX | IMR_TX |\
IMR_RXBUFFOVR | IMR_WATCHDOG)
#define ISR (CMD_BASE + 0x0008)
#define ISR_RXBUFFOVR 0x00000001
#define ISR_WATCHDOG 0x00000002
#define ISR_TX 0x00000008
#define ISR_RX 0x00000010
#define ISR_PHY 0x00000020
#define TXCFG (CMD_BASE + 0x0010)
#define AUTOPAD_CRC 0x00000050
#define DEFAULT_TXCFG AUTOPAD_CRC
#define TXCMD (CMD_BASE + 0x0014)
#define TXCMD_TXDP_MASK 0x00006000
#define TXCMD_TXDP0 0x00000000
#define TXCMD_TXDP1 0x00002000
#define TXCMD_TXDP2 0x00004000
#define TXCMD_TXDP3 0x00006000
#define TX_START_WRITE 0x00008000
#define TX_STOP_WRITE 0x00000000
#define DEFAULT_TXCMD 0x00000000
#define TXBS (CMD_BASE + 0x0018)
#define TXDP0_USED 0x00000001
#define TXDP1_USED 0x00000002
#define TXDP2_USED 0x00000004
#define TXDP3_USED 0x00000008
#define DEFAULT_TXBS 0x00000000
#define TXDES0 (CMD_BASE + 0x0020)
#define TXDPx_ENABLE 0x00008000
#define TXDPx_LEN_MASK 0x00001FFF
#define DEFAULT_TXDES0 0x00000000
#define TXDES1 (CMD_BASE + 0x0024)
#define TXDPx_ENABLE 0x00008000
#define TXDPx_LEN_MASK 0x00001FFF
#define DEFAULT_TXDES1 0x00000000
#define TXDES2 (CMD_BASE + 0x0028)
#define TXDPx_ENABLE 0x00008000
#define TXDPx_LEN_MASK 0x00001FFF
#define DEFAULT_TXDES2 0x00000000
#define TXDES3 (CMD_BASE + 0x002C)
#define TXDPx_ENABLE 0x00008000
#define TXDPx_LEN_MASK 0x00001FFF
#define DEFAULT_TXDES3 0x00000000
#define RXCFG (CMD_BASE + 0x0030)
#define RXBUFF_PROTECT 0x00000001
#define RXTCPCRC_CHECK 0x00000010
#define RXFLOW_ENABLE 0x00000100
#define DEFAULT_RXCFG RXBUFF_PROTECT
#define RXCURT (CMD_BASE + 0x0034)
#define DEFAULT_RXCURT 0x00000000
#define RXBOUND (CMD_BASE + 0x0038)
#define DEFAULT_RXBOUND 0x7FF /* RX pages 0~7FFh */
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
#define MACCFG0 (CMD_BASE + 0x0040)
#define MACCFG0_BIT3_0 0x00000007
#define IPGT_VAL 0x00000150
#define TXFLOW_ENABLE 0x00001000
#define SPEED100 0x00008000
#define DEFAULT_MACCFG0 (IPGT_VAL | MACCFG0_BIT3_0)
#define MACCFG1 (CMD_BASE + 0x0044)
#define RGMII_EN 0x00000002
#define RXFLOW_EN 0x00000020
#define FULLDUPLEX 0x00000040
#define MAX_JUMBO_LEN 0x00000780
#define RXJUMBO_EN 0x00000800
#define GIGA_MODE_EN 0x00001000
#define RXCRC_CHECK 0x00002000
#define RXPAUSE_DA_CHECK 0x00004000
#define JUMBO_LEN_4K 0x00000200
#define JUMBO_LEN_15K 0x00000780
#define DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK | \
RGMII_EN)
#define CICADA_DEFAULT_MACCFG1 (RXCRC_CHECK | RXPAUSE_DA_CHECK)
#define MACCFG2 (CMD_BASE + 0x0048)
#define MACCFG2_BIT15_8 0x00000100
#define JAM_LIMIT_MASK 0x000000FC
#define DEFAULT_JAM_LIMIT 0x00000064
#define DEFAULT_MACCFG2 MACCFG2_BIT15_8
#define MACCFG3 (CMD_BASE + 0x004C)
#define IPGR2_VAL 0x0000000E
#define IPGR1_VAL 0x00000600
#define NOABORT 0x00008000
#define DEFAULT_MACCFG3 (IPGR1_VAL | IPGR2_VAL)
#define TXPAUT (CMD_BASE + 0x0054)
#define DEFAULT_TXPAUT 0x001FE000
#define RXBTHD0 (CMD_BASE + 0x0058)
#define DEFAULT_RXBTHD0 0x00000300
#define RXBTHD1 (CMD_BASE + 0x005C)
#define DEFAULT_RXBTHD1 0x00000600
#define RXFULTHD (CMD_BASE + 0x0060)
#define DEFAULT_RXFULTHD 0x00000100
#define MISC (CMD_BASE + 0x0068)
/* Normal operation mode */
#define MISC_NORMAL 0x00000003
/* Clear bit 0 to reset MAC */
#define MISC_RESET_MAC 0x00000002
/* Clear bit 1 to reset PHY */
#define MISC_RESET_PHY 0x00000001
/* Clear bit 0 and 1 to reset MAC and PHY */
#define MISC_RESET_MAC_PHY 0x00000000
#define DEFAULT_MISC MISC_NORMAL
#define MACID0 (CMD_BASE + 0x0070)
#define MACID1 (CMD_BASE + 0x0074)
#define MACID2 (CMD_BASE + 0x0078)
#define TXLEN (CMD_BASE + 0x007C)
#define DEFAULT_TXLEN 0x000005FC
#define RXFILTER (CMD_BASE + 0x0080)
#define RX_RXANY 0x00000001
#define RX_MULTICAST 0x00000002
#define RX_UNICAST 0x00000004
#define RX_BROADCAST 0x00000008
#define RX_MULTI_HASH 0x00000010
#define DISABLE_RXFILTER 0x00000000
#define DEFAULT_RXFILTER (RX_BROADCAST + RX_UNICAST)
#define MDIOCTRL (CMD_BASE + 0x0084)
#define PHY_ADDR_MASK 0x0000001F
#define REG_ADDR_MASK 0x00001F00
#define READ_PHY 0x00004000
#define WRITE_PHY 0x00008000
#define MDIODP (CMD_BASE + 0x0088)
#define GPIOCTRL (CMD_BASE + 0x008C)
#define RXINDICATOR (CMD_BASE + 0x0090)
#define RX_START_READ 0x00000001
#define RX_STOP_READ 0x00000000
#define DEFAULT_RXINDICATOR RX_STOP_READ
#define TXST (CMD_BASE + 0x0094)
#define MDCCLKPAT (CMD_BASE + 0x00A0)
#define RXIPCRCCNT (CMD_BASE + 0x00A4)
#define RXCRCCNT (CMD_BASE + 0x00A8)
#define TXFAILCNT (CMD_BASE + 0x00AC)
#define PROMDP (CMD_BASE + 0x00B0)
#define PROMCTRL (CMD_BASE + 0x00B4)
#define RELOAD_EEPROM 0x00000200
#define MAXRXLEN (CMD_BASE + 0x00B8)
#define HASHTAB0 (CMD_BASE + 0x00C0)
#define HASHTAB1 (CMD_BASE + 0x00C4)
#define HASHTAB2 (CMD_BASE + 0x00C8)
#define HASHTAB3 (CMD_BASE + 0x00CC)
#define DOGTHD0 (CMD_BASE + 0x00E0)
#define DEFAULT_DOGTHD0 0x0000FFFF
#define DOGTHD1 (CMD_BASE + 0x00E4)
#define START_WATCHDOG_TIMER 0x00008000
#define DEFAULT_DOGTHD1 0x00000FFF
#define SOFTRST (CMD_BASE + 0x00EC)
#define SOFTRST_NORMAL 0x00000003
#define SOFTRST_RESET_MAC 0x00000002
/* Marvell 88E1111 Gigabit PHY Register Definition */
#define M88_SSR 0x0011
#define SSR_SPEED_MASK 0xC000
#define SSR_SPEED_1000 0x8000
#define SSR_SPEED_100 0x4000
#define SSR_SPEED_10 0x0000
#define SSR_DUPLEX 0x2000
#define SSR_MEDIA_RESOLVED_OK 0x0800
#define SSR_MEDIA_MASK (SSR_SPEED_MASK | SSR_DUPLEX)
#define SSR_1000FULL (SSR_SPEED_1000 | SSR_DUPLEX)
#define SSR_1000HALF SSR_SPEED_1000
#define SSR_100FULL (SSR_SPEED_100 | SSR_DUPLEX)
#define SSR_100HALF SSR_SPEED_100
#define SSR_10FULL (SSR_SPEED_10 | SSR_DUPLEX)
#define SSR_10HALF SSR_SPEED_10
#define M88_IER 0x0012
#define LINK_CHANGE_INT 0x0400
#define M88_ISR 0x0013
#define LINK_CHANGE_STATUS 0x0400
#define M88E1111_EXT_SCR 0x0014
#define RGMII_RXCLK_DELAY 0x0080
#define RGMII_TXCLK_DELAY 0x0002
#define DEFAULT_EXT_SCR (RGMII_TXCLK_DELAY | RGMII_RXCLK_DELAY)
#define M88E1111_EXT_SSR 0x001B
#define HWCFG_MODE_MASK 0x000F
#define RGMII_COPPER_MODE 0x000B
/* Marvell 88E1118 Gigabit PHY Register Definition */
#define M88E1118_CR 0x14
#define M88E1118_CR_RGMII_RXCLK_DELAY 0x0020
#define M88E1118_CR_RGMII_TXCLK_DELAY 0x0010
#define M88E1118_CR_DEFAULT (M88E1118_CR_RGMII_TXCLK_DELAY | \
M88E1118_CR_RGMII_RXCLK_DELAY)
#define M88E1118_LEDCTL 0x10 /* Reg 16 on page 3 */
#define M88E1118_LEDCTL_LED2INT 0x200
#define M88E1118_LEDCTL_LED2BLNK 0x400
#define M88E1118_LEDCTL_LED0DUALMODE1 0xc
#define M88E1118_LEDCTL_LED0DUALMODE2 0xd
#define M88E1118_LEDCTL_LED0DUALMODE3 0xe
#define M88E1118_LEDCTL_LED0DUALMODE4 0xf
#define M88E1118_LEDCTL_DEFAULT (M88E1118_LEDCTL_LED2BLNK | \
M88E1118_LEDCTL_LED0DUALMODE4)
#define M88E1118_LEDMIX 0x11 /* Reg 17 on page 3 */
#define M88E1118_LEDMIX_LED050 0x4
#define M88E1118_LEDMIX_LED150 0x8
#define M88E1118_PAGE_SEL 0x16 /* Reg page select */
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
/* CICADA CIS8201 Gigabit PHY Register Definition */
#define CIS_IMR 0x0019
#define CIS_INT_ENABLE 0x8000
#define CIS_LINK_CHANGE_INT 0x2000
#define CIS_ISR 0x001A
#define CIS_INT_PENDING 0x8000
#define CIS_LINK_CHANGE_STATUS 0x2000
#define CIS_AUX_CTRL_STATUS 0x001C
#define CIS_AUTONEG_COMPLETE 0x8000
#define CIS_SPEED_MASK 0x0018
#define CIS_SPEED_1000 0x0010
#define CIS_SPEED_100 0x0008
#define CIS_SPEED_10 0x0000
#define CIS_DUPLEX 0x0020
#define CIS_MEDIA_MASK (CIS_SPEED_MASK | CIS_DUPLEX)
#define CIS_1000FULL (CIS_SPEED_1000 | CIS_DUPLEX)
#define CIS_1000HALF CIS_SPEED_1000
#define CIS_100FULL (CIS_SPEED_100 | CIS_DUPLEX)
#define CIS_100HALF CIS_SPEED_100
#define CIS_10FULL (CIS_SPEED_10 | CIS_DUPLEX)
#define CIS_10HALF CIS_SPEED_10
#define CIS_SMI_PRIORITY 0x0004
static inline unsigned short INW (struct eth_device *dev, unsigned long addr)
{
return le16_to_cpu(readw(addr + (void *)dev->iobase));
/*
Access RXBUFFER_START/TXBUFFER_START to read RX buffer/write TX buffer
*/
#if defined (CONFIG_DRIVER_AX88180_16BIT)
static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
{
writew(cpu_to_le16(command), addr + (void *)dev->iobase);
}
static inline unsigned short READ_RXBUF (struct eth_device *dev)
{
return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase));
}
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data)
{
writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase);
static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr)
{
writel(cpu_to_le32(command), addr + (void *)dev->iobase);
static inline unsigned long READ_RXBUF (struct eth_device *dev)
{
return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase));
}
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data)
{
writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase);