Skip to content
Snippets Groups Projects
eth-uclass.c 12.2 KiB
Newer Older
  • Learn to ignore specific revisions
  • // SPDX-License-Identifier: GPL-2.0+
    
    /*
     * (C) Copyright 2001-2015
     * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
     * Joe Hershberger, National Instruments
     */
    
    #include <common.h>
    #include <dm.h>
    #include <environment.h>
    #include <net.h>
    #include <dm/device-internal.h>
    #include <dm/uclass-internal.h>
    #include "eth_internal.h"
    
    
    DECLARE_GLOBAL_DATA_PTR;
    
    
    /**
     * struct eth_device_priv - private structure for each Ethernet device
     *
     * @state: The state of the Ethernet MAC driver (defined by enum eth_state_t)
     */
    struct eth_device_priv {
    	enum eth_state_t state;
    };
    
    /**
     * struct eth_uclass_priv - The structure attached to the uclass itself
     *
     * @current: The Ethernet device that the network functions are using
     */
    struct eth_uclass_priv {
    	struct udevice *current;
    };
    
    /* eth_errno - This stores the most recent failure code from DM functions */
    static int eth_errno;
    
    static struct eth_uclass_priv *eth_get_uclass_priv(void)
    {
    	struct uclass *uc;
    
    	uclass_get(UCLASS_ETH, &uc);
    	assert(uc);
    	return uc->priv;
    }
    
    void eth_set_current_to_next(void)
    {
    	struct eth_uclass_priv *uc_priv;
    
    	uc_priv = eth_get_uclass_priv();
    	if (uc_priv->current)
    		uclass_next_device(&uc_priv->current);
    	if (!uc_priv->current)
    		uclass_first_device(UCLASS_ETH, &uc_priv->current);
    }
    
    /*
     * Typically this will simply return the active device.
     * In the case where the most recent active device was unset, this will attempt
     * to return the first device. If that device doesn't exist or fails to probe,
     * this function will return NULL.
     */
    struct udevice *eth_get_dev(void)
    {
    	struct eth_uclass_priv *uc_priv;
    
    	uc_priv = eth_get_uclass_priv();
    	if (!uc_priv->current)
    		eth_errno = uclass_first_device(UCLASS_ETH,
    				    &uc_priv->current);
    	return uc_priv->current;
    }
    
    /*
     * Typically this will just store a device pointer.
     * In case it was not probed, we will attempt to do so.
     * dev may be NULL to unset the active device.
     */
    void eth_set_dev(struct udevice *dev)
    {
    	if (dev && !device_active(dev)) {
    		eth_errno = device_probe(dev);
    		if (eth_errno)
    			dev = NULL;
    	}
    
    	eth_get_uclass_priv()->current = dev;
    }
    
    /*
     * Find the udevice that either has the name passed in as devname or has an
     * alias named devname.
     */
    struct udevice *eth_get_dev_by_name(const char *devname)
    {
    	int seq = -1;
    	char *endp = NULL;
    	const char *startp = NULL;
    	struct udevice *it;
    	struct uclass *uc;
    	int len = strlen("eth");
    
    	/* Must be longer than 3 to be an alias */
    	if (!strncmp(devname, "eth", len) && strlen(devname) > len) {
    		startp = devname + len;
    		seq = simple_strtoul(startp, &endp, 10);
    	}
    
    	uclass_get(UCLASS_ETH, &uc);
    	uclass_foreach_dev(it, uc) {
    		/*
    		 * We need the seq to be valid, so try to probe it.
    		 * If the probe fails, the seq will not match since it will be
    		 * -1 instead of what we are looking for.
    		 * We don't care about errors from probe here. Either they won't
    		 * match an alias or it will match a literal name and we'll pick
    		 * up the error when we try to probe again in eth_set_dev().
    		 */
    		if (device_probe(it))
    			continue;
    		/* Check for the name or the sequence number to match */
    		if (strcmp(it->name, devname) == 0 ||
    		    (endp > startp && it->seq == seq))
    			return it;
    	}
    
    	return NULL;
    }
    
    unsigned char *eth_get_ethaddr(void)
    {
    	struct eth_pdata *pdata;
    
    	if (eth_get_dev()) {
    		pdata = eth_get_dev()->platdata;
    		return pdata->enetaddr;
    	}
    
    	return NULL;
    }
    
    /* Set active state without calling start on the driver */
    int eth_init_state_only(void)
    {
    	struct udevice *current;
    	struct eth_device_priv *priv;
    
    	current = eth_get_dev();
    	if (!current || !device_active(current))
    		return -EINVAL;
    
    	priv = current->uclass_priv;
    	priv->state = ETH_STATE_ACTIVE;
    
    	return 0;
    }
    
    /* Set passive state without calling stop on the driver */
    void eth_halt_state_only(void)
    {
    	struct udevice *current;
    	struct eth_device_priv *priv;
    
    	current = eth_get_dev();
    	if (!current || !device_active(current))
    		return;
    
    	priv = current->uclass_priv;
    	priv->state = ETH_STATE_PASSIVE;
    }
    
    int eth_get_dev_index(void)
    {
    	if (eth_get_dev())
    		return eth_get_dev()->seq;
    	return -1;
    }
    
    static int eth_write_hwaddr(struct udevice *dev)
    {
    
    	struct eth_pdata *pdata;
    
    	int ret = 0;
    
    	if (!dev || !device_active(dev))
    		return -EINVAL;
    
    	/* seq is valid since the device is active */
    	if (eth_get_ops(dev)->write_hwaddr && !eth_mac_skip(dev->seq)) {
    
    		if (!is_valid_ethaddr(pdata->enetaddr)) {
    			printf("\nError: %s address %pM illegal value\n",
    			       dev->name, pdata->enetaddr);
    			return -EINVAL;
    		}
    
    		/*
    		 * Drivers are allowed to decide not to implement this at
    		 * run-time. E.g. Some devices may use it and some may not.
    		 */
    		ret = eth_get_ops(dev)->write_hwaddr(dev);
    		if (ret == -ENOSYS)
    			ret = 0;
    		if (ret)
    			printf("\nWarning: %s failed to set MAC address\n",
    			       dev->name);
    	}
    
    	return ret;
    }
    
    static int on_ethaddr(const char *name, const char *value, enum env_op op,
    	int flags)
    {
    	int index;
    	int retval;
    	struct udevice *dev;
    
    	/* look for an index after "eth" */
    	index = simple_strtoul(name + 3, NULL, 10);
    
    	retval = uclass_find_device_by_seq(UCLASS_ETH, index, false, &dev);
    	if (!retval) {
    		struct eth_pdata *pdata = dev->platdata;
    		switch (op) {
    		case env_op_create:
    		case env_op_overwrite:
    			eth_parse_enetaddr(value, pdata->enetaddr);
    
    			break;
    		case env_op_delete:
    
    			memset(pdata->enetaddr, 0, ARP_HLEN);
    
    		}
    	}
    
    	return 0;
    }
    U_BOOT_ENV_CALLBACK(ethaddr, on_ethaddr);
    
    int eth_init(void)
    {
    
    	char *ethact = env_get("ethact");
    	char *ethrotate = env_get("ethrotate");
    
    	struct udevice *current = NULL;
    	struct udevice *old_current;
    	int ret = -ENODEV;
    
    	/*
    	 * When 'ethrotate' variable is set to 'no' and 'ethact' variable
    	 * is already set to an ethernet device, we should stick to 'ethact'.
    	 */
    	if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0)) {
    		if (ethact) {
    			current = eth_get_dev_by_name(ethact);
    			if (!current)
    				return -EINVAL;
    		}
    	}
    
    	if (!current) {
    		current = eth_get_dev();
    		if (!current) {
    			printf("No ethernet found.\n");
    			return -ENODEV;
    		}
    	}
    
    	old_current = current;
    	do {
    		if (current) {
    			debug("Trying %s\n", current->name);
    
    			if (device_active(current)) {
    				ret = eth_get_ops(current)->start(current);
    				if (ret >= 0) {
    					struct eth_device_priv *priv =
    						current->uclass_priv;
    
    					priv->state = ETH_STATE_ACTIVE;
    					return 0;
    				}
    			} else {
    				ret = eth_errno;
    			}
    
    			debug("FAIL\n");
    		} else {
    			debug("PROBE FAIL\n");
    		}
    
    		/*
    		 * If ethrotate is enabled, this will change "current",
    		 * otherwise we will drop out of this while loop immediately
    		 */
    		eth_try_another(0);
    		/* This will ensure the new "current" attempted to probe */
    		current = eth_get_dev();
    	} while (old_current != current);
    
    	return ret;
    }
    
    void eth_halt(void)
    {
    	struct udevice *current;
    	struct eth_device_priv *priv;
    
    	current = eth_get_dev();
    	if (!current || !device_active(current))
    		return;
    
    	eth_get_ops(current)->stop(current);
    	priv = current->uclass_priv;
    	priv->state = ETH_STATE_PASSIVE;
    }
    
    int eth_is_active(struct udevice *dev)
    {
    	struct eth_device_priv *priv;
    
    	if (!dev || !device_active(dev))
    		return 0;
    
    	priv = dev_get_uclass_priv(dev);
    	return priv->state == ETH_STATE_ACTIVE;
    }
    
    int eth_send(void *packet, int length)
    {
    	struct udevice *current;
    	int ret;
    
    	current = eth_get_dev();
    	if (!current)
    		return -ENODEV;
    
    
    	if (!eth_is_active(current))
    
    		return -EINVAL;
    
    	ret = eth_get_ops(current)->send(current, packet, length);
    	if (ret < 0) {
    		/* We cannot completely return the error at present */
    		debug("%s: send() returned error %d\n", __func__, ret);
    	}
    	return ret;
    }
    
    int eth_rx(void)
    {
    	struct udevice *current;
    	uchar *packet;
    	int flags;
    	int ret;
    	int i;
    
    	current = eth_get_dev();
    	if (!current)
    		return -ENODEV;
    
    
    	if (!eth_is_active(current))
    
    		return -EINVAL;
    
    	/* Process up to 32 packets at one time */
    	flags = ETH_RECV_CHECK_DEVICE;
    	for (i = 0; i < 32; i++) {
    		ret = eth_get_ops(current)->recv(current, flags, &packet);
    		flags = 0;
    		if (ret > 0)
    			net_process_received_packet(packet, ret);
    		if (ret >= 0 && eth_get_ops(current)->free_pkt)
    			eth_get_ops(current)->free_pkt(current, packet, ret);
    		if (ret <= 0)
    			break;
    	}
    	if (ret == -EAGAIN)
    		ret = 0;
    	if (ret < 0) {
    		/* We cannot completely return the error at present */
    		debug("%s: recv() returned error %d\n", __func__, ret);
    	}
    	return ret;
    }
    
    int eth_initialize(void)
    {
    	int num_devices = 0;
    	struct udevice *dev;
    
    	eth_common_init();
    
    	/*
    	 * Devices need to write the hwaddr even if not started so that Linux
    	 * will have access to the hwaddr that u-boot stored for the device.
    	 * This is accomplished by attempting to probe each device and calling
    	 * their write_hwaddr() operation.
    	 */
    
    	uclass_first_device_check(UCLASS_ETH, &dev);
    
    	if (!dev) {
    		printf("No ethernet found.\n");
    		bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
    	} else {
    
    		char *ethprime = env_get("ethprime");
    
    		struct udevice *prime_dev = NULL;
    
    		if (ethprime)
    			prime_dev = eth_get_dev_by_name(ethprime);
    		if (prime_dev) {
    			eth_set_dev(prime_dev);
    			eth_current_changed();
    		} else {
    			eth_set_dev(NULL);
    		}
    
    		bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
    		do {
    			if (num_devices)
    				printf(", ");
    
    			printf("eth%d: %s", dev->seq, dev->name);
    
    			if (ethprime && dev == prime_dev)
    				printf(" [PRIME]");
    
    			eth_write_hwaddr(dev);
    
    
    			uclass_next_device_check(&dev);
    
    			num_devices++;
    		} while (dev);
    
    		putc('\n');
    	}
    
    	return num_devices;
    }
    
    static int eth_post_bind(struct udevice *dev)
    {
    	if (strchr(dev->name, ' ')) {
    		printf("\nError: eth device name \"%s\" has a space!\n",
    		       dev->name);
    		return -EINVAL;
    	}
    
    	return 0;
    }
    
    static int eth_pre_unbind(struct udevice *dev)
    {
    	/* Don't hang onto a pointer that is going away */
    	if (dev == eth_get_uclass_priv()->current)
    		eth_set_dev(NULL);
    
    	return 0;
    }
    
    static int eth_post_probe(struct udevice *dev)
    {
    	struct eth_device_priv *priv = dev->uclass_priv;
    	struct eth_pdata *pdata = dev->platdata;
    
    	unsigned char env_enetaddr[ARP_HLEN];
    
    
    #if defined(CONFIG_NEEDS_MANUAL_RELOC)
    	struct eth_ops *ops = eth_get_ops(dev);
    	static int reloc_done;
    
    	if (!reloc_done) {
    		if (ops->start)
    			ops->start += gd->reloc_off;
    		if (ops->send)
    			ops->send += gd->reloc_off;
    		if (ops->recv)
    			ops->recv += gd->reloc_off;
    		if (ops->free_pkt)
    			ops->free_pkt += gd->reloc_off;
    		if (ops->stop)
    			ops->stop += gd->reloc_off;
    #ifdef CONFIG_MCAST_TFTP
    		if (ops->mcast)
    			ops->mcast += gd->reloc_off;
    #endif
    		if (ops->write_hwaddr)
    			ops->write_hwaddr += gd->reloc_off;
    		if (ops->read_rom_hwaddr)
    			ops->read_rom_hwaddr += gd->reloc_off;
    
    		reloc_done++;
    	}
    #endif
    
    	priv->state = ETH_STATE_INIT;
    
    	/* Check if the device has a MAC address in ROM */
    	if (eth_get_ops(dev)->read_rom_hwaddr)
    		eth_get_ops(dev)->read_rom_hwaddr(dev);
    
    
    	eth_env_get_enetaddr_by_index("eth", dev->seq, env_enetaddr);
    
    	if (!is_zero_ethaddr(env_enetaddr)) {
    		if (!is_zero_ethaddr(pdata->enetaddr) &&
    
    		    memcmp(pdata->enetaddr, env_enetaddr, ARP_HLEN)) {
    
    			printf("\nWarning: %s MAC addresses don't match:\n",
    			       dev->name);
    
    			printf("Address in ROM is          %pM\n",
    
    			       pdata->enetaddr);
    			printf("Address in environment is  %pM\n",
    			       env_enetaddr);
    		}
    
    		/* Override the ROM MAC address */
    
    		memcpy(pdata->enetaddr, env_enetaddr, ARP_HLEN);
    
    	} else if (is_valid_ethaddr(pdata->enetaddr)) {
    
    		eth_env_set_enetaddr_by_index("eth", dev->seq, pdata->enetaddr);
    
    		printf("\nWarning: %s using MAC address from ROM\n",
    		       dev->name);
    
    	} else if (is_zero_ethaddr(pdata->enetaddr) ||
    		   !is_valid_ethaddr(pdata->enetaddr)) {
    
    #ifdef CONFIG_NET_RANDOM_ETHADDR
    		net_random_ethaddr(pdata->enetaddr);
    		printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
    		       dev->name, dev->seq, pdata->enetaddr);
    #else
    		printf("\nError: %s address not set.\n",
    		       dev->name);
    		return -EINVAL;
    #endif
    	}
    
    	return 0;
    }
    
    static int eth_pre_remove(struct udevice *dev)
    {
    	struct eth_pdata *pdata = dev->platdata;
    
    	eth_get_ops(dev)->stop(dev);
    
    	/* clear the MAC address */
    
    	memset(pdata->enetaddr, 0, ARP_HLEN);
    
    
    	return 0;
    }
    
    UCLASS_DRIVER(eth) = {
    	.name		= "eth",
    	.id		= UCLASS_ETH,
    	.post_bind	= eth_post_bind,
    	.pre_unbind	= eth_pre_unbind,
    	.post_probe	= eth_post_probe,
    	.pre_remove	= eth_pre_remove,
    	.priv_auto_alloc_size = sizeof(struct eth_uclass_priv),
    	.per_device_auto_alloc_size = sizeof(struct eth_device_priv),
    	.flags		= DM_UC_FLAG_SEQ_ALIAS,
    };