Newer
Older
/*
* (C) Copyright 2005
* ARM Ltd.
* Peter Pearse, <Peter.Pearse@arm.com>
* Configuration for ARM Core Modules.
* No standalonw port yet available
* - this file is included by both integratorap.h & integratorcp.h
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ARMCOREMODULE_H
#define __ARMCOREMODULE_H
/* CM registers common to all CMs */
/* Note that observed values after reboot into the ARM Boot Monitor
have been used as defaults, rather than the POR values */
#define CMMASK_REMAP 0x00000005 /* set remap & led */
#define CMMASK_RESET 0x00000008
#define OS_LOCK 0x00000014
#define CMVAL_LOCK1 0x0000A000 /* locking value */
#define CMVAL_LOCK2 0x0000005F /* locking value */
#define CMVAL_UNLOCK 0x00000000 /* any value != CM_LOCKVAL */
#define OS_SDRAM 0x00000020
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
#define CMMASK_MAP_SIMPLE 0xFFFDFFFF /* simple mapping */
#define CMMASK_TCRAM_DISABLE 0xFFFEFFFF /* TCRAM disabled */
#define CMMASK_LOWVEC 0x00000000 /* vectors @ 0x00000000 */
#define CMMASK_LE 0xFFFFFFF7 /* little endian */
#define CMMASK_CMxx6_COMMON 0x00000013 /* Common value for CMxx6 */
/* - observed reset value of */
/* CM926EJ-S */
/* CM1136-EJ-S */
#if defined (CONFIG_CM10200E) || defined (CONFIG_CM10220E)
#define CMMASK_INIT_102 0x00000300 /* see CM102xx ref manual */
/* - PLL test clock bypassed */
/* - bus clock ratio 2 */
/* - little endian */
/* - vectors at zero */
#endif /* CM1022xx */
/* Determine CM characteristics */
#undef CONFIG_CM_MULTIPLE_SSRAM
#undef CONFIG_CM_SPD_DETECT
#undef CONFIG_CM_REMAP
#undef CONFIG_CM_INIT
#undef CONFIG_CM_TCRAM
#if defined (CONFIG_CM946E_S) || defined (CONFIG_CM966E_S)
#define CONFIG_CM_MULTIPLE_SSRAM /* CM has multiple SSRAM mapping */
#endif
/* Excalibur core module has reduced functionality */
#ifndef CONFIG_CM922T_XA10
#define CONFIG_CM_SPD_DETECT /* CM supports SPD query */
#define OS_SPD 0x00000100 /* Address of SPD data */
#define CONFIG_CM_REMAP /* CM supports remapping */
#define CONFIG_CM_INIT /* CM has initialization reg */
#endif /* NOT EXCALIBUR */
#if defined(CONFIG_CM926EJ_S) || defined (CONFIG_CM946E_S) || \
defined(CONFIG_CM966E_S) || defined (CONFIG_CM1026EJ_S) || \
defined(CONFIG_CM1136JF_S)
#define CONFIG_CM_TCRAM /* CM has TCRAM */
#endif
#ifdef CONFIG_CM_SPD_DETECT
#define OS_SPD 0x00000100 /* The SDRAM SPD data is copied here */
#endif
#endif /* __ARMCOREMODULE_H */