No AHI or axmp3 audio output
Environment: A4000, Cyberstorm MK2 060, 128MB CPU board RAM, X-Surf, Deneb (with Poseidon in flash), OS 3.2.1 (with ROM), P96 v3.2.1, Roadshow as the TCP stack.
I've installed the ZZ9000AX as per the manual, and I have normal Paula output pass-through, when the Workbench is fully loaded. However, I have no audio output from AHI or the axmp3 tool at all.
Interesting detail: If I boot with no startup-sequence and only run SetPatch, I don't hear the Paula pass-through when running some demos (e.g. Starstruck) when I did a test. The same demo had normal Paula pass-through output when the full Workbench was loaded.
I've tested the updated zz9000ax.device also, but it didn't seem to make a difference for me.
I've also tested both the recommended AHI version (v4.x) and the latest v6.x from Aminet, just in case one would show a different behavior (it didn't, both behaved the same way).
I tested the AHI output from a few different players, to make sure it wasn't related to that: AmigaAMP, EaglePlayer, Songplayer. I used different files to play back (mp3 and MODs), to make sure that it wasn't related to that, either.
I've tried stopping Poseidon to see if that made any difference (it didn't).
Happy to try out any other suggestions you may have about this, or to provide more details about the environment as needed.