Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • reform/reform-boundary-uboot
  • josch/reform-boundary-uboot
  • jacqueline/reform-boundary-uboot
  • cinap_lenrek/reform-boundary-uboot
  • jackhumbert/reform-boundary-uboot
  • sevan/reform-boundary-uboot
  • khm/reform-boundary-uboot
7 results
Show changes
Commits on Source (30986)
30,886 additional commits have been omitted to prevent performance issues.
Hide whitespace changes
Inline Side-by-side
Showing
with 2085 additions and 1986 deletions
.checkpatch.conf
View file @ 8e809399
......@@ -21,3 +21,10 @@
# Ignore networking block comment style
--ignore NETWORKING_BLOCK_COMMENT_STYLE
# Ignore "WARNING: Prefer ether_addr_copy() over memcpy() if the Ethernet
# addresses are __aligned(2)".
--ignore PREFER_ETHER_ADDR_COPY
# A bit shorter of a description is OK with us.
--min-conf-desc-length=2
.gitignore
View file @ 8e809399
......@@ -3,20 +3,30 @@
# subdirectories here. Add them in the ".gitignore" file
# in that subdirectory instead.
#
# Normal rules
# Normal rules (sorted alphabetically)
#
*.rej
*.orig
.*
*.a
*.bin
*.cfgtmp
*.dtb
*.dtb.S
*.elf
*.exe
*.gcda
*.gcno
*.i
*.lex.c
*.lst
*.mod.c
*.o
*.o.*
*.order
*.patch
*.s
*.su
*~
*.swp
*.patch
*.bin
*.cfgtmp
*.dts.tmp
*.tab.[ch]
# Build tree
/build-*
......@@ -24,43 +34,31 @@
#
# Top-level generic files
#
/MLO
/SPL
fit-dtb.blob
/MLO*
/SPL*
/System.map
/u-boot
/u-boot.hex
/u-boot.imx
/u-boot-with-spl.imx
/u-boot-with-nand-spl.imx
/u-boot.map
/u-boot.srec
/u-boot.ldr
/u-boot.ldr.hex
/u-boot.ldr.srec
/u-boot.img
/u-boot.kwb
/u-boot.sha1
/u-boot.dis
/u-boot.lds
/u-boot.ubl
/u-boot.ais
/u-boot.dtb
/u-boot.sb
/u-boot.bd
/u-boot.geany
/u-boot*
/boards.cfg
#
# Generated files
# git files that we don't want to ignore even it they are dot-files
#
!.gitignore
!.mailmap
*.depend*
/LOG
/errlog
/reloc_off
#
# Generated files
#
/spl/
/tpl/
/defconfig
#
# Generated include files
#
/include/config/
/include/generated/
asm-offsets.s
# stgit generated dirs
patches-*
......@@ -87,5 +85,6 @@ GRTAGS
GSYMS
GTAGS
# spl ais files
/spl/*.ais
*.orig
*~
\#*#
.gitlab-ci.yml 0 → 100644
View file @ 8e809399
image: debian:bullseye-slim
build:
script: |
apt-get update
apt-get --yes install --no-install-recommends gcc-aarch64-linux-gnu build-essential bison flex device-tree-compiler git
cp mntreform-config .config
./build.sh
if git describe >/dev/null 2>&1; then
grep --quiet --fixed-strings "EXTRAVERSION = \\ MNT\\ Reform\\ $(git describe --always --tags --abbrev=0)" Makefile
fi
mv flash.bin imx8mq-mnt-reform2-flash.bin
cp imx8mq-mnt-reform2-flash.bin imx8mq-mnt-reform2-hdmi-flash.bin
artifacts:
paths:
- "imx8mq-mnt-reform2-flash.bin"
- "imx8mq-mnt-reform2-hdmi-flash.bin"
.mailmap 0 → 100644
View file @ 8e809399
#
# This list is used by git-shortlog to fix a few botched name translations
# in the git archive, either because the author's full name was messed up
# and/or not always written the same way, making contributions from the
# same person appearing not to be so or badly displayed.
#
# This file can be modified by hand or updated by the following command:
# scripts/mailmapper > tmp; mv tmp .mailmap
#
Allen Martin <amartin@nvidia.com>
Andreas Bießmann <andreas.devel@googlemail.com>
Andreas Bießmann <andreas@biessmann.org>
Aneesh V <aneesh@ti.com>
Dirk Behme <dirk.behme@googlemail.com>
Fabio Estevam <fabio.estevam@nxp.com>
Jagan Teki <402jagan@gmail.com>
Jagan Teki <jaganna@gmail.com>
Jagan Teki <jaganna@xilinx.com>
Jagan Teki <jagannadh.teki@gmail.com>
Jagan Teki <jagannadha.sutradharudu-teki@xilinx.com>
Markus Klotzbuecher <mk@denx.de>
Paul Burton <paul.burton@mips.com> <paul.burton@imgtec.com>
Prabhakar Kushwaha <prabhakar@freescale.com>
Rajeshwari Shinde <rajeshwari.s@samsung.com>
Ricardo Ribalda <ricardo.ribalda@uam.es>
Ricardo Ribalda <ricardo.ribalda@gmail.com>
Sandeep Paulraj <s-paulraj@ti.com>
Shaohui Xie <Shaohui.Xie@freescale.com>
Stefan Roese <stroese>
Stefano Babic <sbabic@denx.de>
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Wolfgang Denk <wdenk>
York Sun <yorksun@freescale.com>
York Sun <york.sun@nxp.com>
Łukasz Majewski <l.majewski@samsung.com>
.travis.yml 0 → 100644
View file @ 8e809399
# SPDX-License-Identifier: GPL-2.0+
# Copyright Roger Meier <r.meier@siemens.com>
# build U-Boot on Travis CI - https://travis-ci.org/
sudo: required
dist: trusty
language: c
addons:
apt:
packages:
- cppcheck
- sloccount
- sparse
- bc
- build-essential
- libsdl1.2-dev
- python
- python-virtualenv
- swig
- libpython-dev
- iasl
- grub-efi-ia32-bin
- rpm2cpio
- wget
- device-tree-compiler
- lzop
before_install:
- sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y
- sudo apt-get update -q
- sudo apt-get install libisl15 -y
install:
# Clone uboot-test-hooks
- git clone --depth=1 git://github.com/swarren/uboot-test-hooks.git /tmp/uboot-test-hooks
- ln -s travis-ci /tmp/uboot-test-hooks/bin/`hostname`
- ln -s travis-ci /tmp/uboot-test-hooks/py/`hostname`
# prepare buildman environment
- echo -e "[toolchain]\nroot = /usr" > ~/.buildman
- echo -e "arc = /tmp/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman
- echo -e "\n[toolchain-alias]\nsh = sh2\n" >> ~/.buildman
- cat ~/.buildman
- virtualenv /tmp/venv
- . /tmp/venv/bin/activate
- pip install pytest
- grub-mkimage -o ~/grub_x86.efi -O i386-efi normal echo lsefimmap lsefi lsefisystab efinet tftp minicmd
- mkdir ~/grub2-arm
- ( cd ~/grub2-arm; wget -O - http://download.opensuse.org/ports/armv7hl/distribution/leap/42.2/repo/oss/suse/armv7hl/grub2-arm-efi-2.02~beta2-87.1.armv7hl.rpm | rpm2cpio | cpio -di )
- mkdir ~/grub2-arm64
- ( cd ~/grub2-arm64; wget -O - http://download.opensuse.org/ports/aarch64/distribution/leap/42.2/repo/oss/suse/aarch64/grub2-arm64-efi-2.02~beta2-87.1.aarch64.rpm | rpm2cpio | cpio -di )
env:
global:
- PATH=/tmp/qemu-install/bin:/tmp/uboot-test-hooks/bin:/usr/bin:/bin
- PYTHONPATH=/tmp/uboot-test-hooks/py/travis-ci
- BUILD_DIR=build
- HOSTCC="cc"
- HOSTCXX="c++"
before_script:
# install toolchains based on TOOLCHAIN} variable
- if [[ "${TOOLCHAIN}" == *m68k* ]]; then ./tools/buildman/buildman --fetch-arch m68k ; fi
- if [[ "${TOOLCHAIN}" == *microblaze* ]]; then ./tools/buildman/buildman --fetch-arch microblaze ; fi
- if [[ "${TOOLCHAIN}" == *mips* ]]; then ./tools/buildman/buildman --fetch-arch mips ; fi
- if [[ "${TOOLCHAIN}" == *or32* ]]; then ./tools/buildman/buildman --fetch-arch or32 ; fi
- if [[ "${TOOLCHAIN}" == *sh* ]]; then ./tools/buildman/buildman --fetch-arch sh2 ; fi
- if [[ "${TOOLCHAIN}" == *x86_64* ]]; then
./tools/buildman/buildman --fetch-arch x86_64;
echo -e "\n[toolchain-prefix]\nx86 = ${HOME}/.buildman-toolchains/gcc-7.3.0-nolibc/x86_64-linux/bin/x86_64-linux-" >> ~/.buildman;
fi
- if [[ "${TOOLCHAIN}" == arc ]]; then
wget https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2017.09-release/arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz &&
tar -C /tmp -xf arc_gnu_2017.09_prebuilt_uclibc_le_archs_linux_install.tar.gz;
fi
- if [[ "${TOOLCHAIN}" == *xtensa* ]]; then
wget https://github.com/foss-xtensa/toolchain/releases/download/2018.02/x86_64-2018.02-${TOOLCHAIN}.tar.gz &&
tar -C /tmp -xf x86_64-2018.02-${TOOLCHAIN}.tar.gz &&
echo -e "\n[toolchain-prefix]\nxtensa = /tmp/2018.02/${TOOLCHAIN}/bin/${TOOLCHAIN}-" >> ~/.buildman;
fi
# If TOOLCHAIN is unset, we're on some flavour of ARM.
- if [[ "${TOOLCHAIN}" == "" ]]; then
./tools/buildman/buildman --fetch-arch arm &&
./tools/buildman/buildman --fetch-arch aarch64;
fi
- if [[ "${TOOLCHAIN}" == "powerpc" ]]; then ./tools/buildman/buildman --fetch-arch powerpc; fi
- if [[ "${TOOLCHAIN}" == "riscv" ]]; then
wget https://github.com/andestech/prebuilt/releases/download/20180530/riscv64-unknown-linux-gnu.tar.gz &&
tar -C /tmp -xf riscv64-unknown-linux-gnu.tar.gz &&
echo -e "\n[toolchain-prefix]\nriscv = /tmp/riscv64-unknown-linux-gnu/bin/riscv64-unknown-linux-gnu-" >> ~/.buildman;
fi
- if [[ "${QEMU_TARGET}" != "" ]]; then
git clone git://git.qemu.org/qemu.git /tmp/qemu;
pushd /tmp/qemu;
git submodule update --init dtc &&
git checkout v2.8.0-rc3 &&
./configure --prefix=/tmp/qemu-install --target-list=${QEMU_TARGET} &&
make -j4 all install;
popd;
fi
script:
# Comments must be outside the command strings below, or the Travis parser
# will get confused.
#
# Exit code 129 means warnings only.
- if [[ "${BUILDMAN}" != "" ]]; then
ret=0;
tools/buildman/buildman -P -E ${BUILDMAN} || ret=$?;
if [[ $ret -ne 0 && $ret -ne 129 ]]; then
tools/buildman/buildman -sdeP ${BUILDMAN};
exit $ret;
fi;
fi
# "not a_test_which_does_not_exist" is a dummy -k parameter which will
# never prevent any test from running. That way, we can always pass
# "-k something" even when $TEST_PY_TEST_SPEC doesnt need a custom
# value.
- export UBOOT_TRAVIS_BUILD_DIR=`cd .. && pwd`/.bm-work/${TEST_PY_BD};
cp ~/grub_x86.efi $UBOOT_TRAVIS_BUILD_DIR/;
cp ~/grub2-arm/usr/lib/grub2/arm-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm.efi;
cp ~/grub2-arm64/usr/lib/grub2/arm64-efi/grub.efi $UBOOT_TRAVIS_BUILD_DIR/grub_arm64.efi;
if [[ "${TEST_PY_BD}" != "" ]]; then
./test/py/test.py --bd ${TEST_PY_BD} ${TEST_PY_ID}
-k "${TEST_PY_TEST_SPEC:-not a_test_which_does_not_exist}"
--build-dir "$UBOOT_TRAVIS_BUILD_DIR";
ret=$?;
if [[ $ret -ne 0 ]]; then
exit $ret;
fi;
fi;
if [[ -n "${TEST_PY_TOOLS}" ]]; then
PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
./tools/binman/binman -t &&
./tools/patman/patman --test &&
./tools/buildman/buildman -t &&
PYTHONPATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc/pylibfdt"
PATH="${UBOOT_TRAVIS_BUILD_DIR}/scripts/dtc:${PATH}"
./tools/dtoc/dtoc -t;
fi
matrix:
include:
# we need to build by vendor due to 50min time limit for builds
# each env setting here is a dedicated build
- env:
- BUILDMAN="arc"
TOOLCHAIN="arc"
- env:
- BUILDMAN="arm11 arm7 arm920t arm946es"
- env:
- JOB="arm926ejs"
BUILDMAN="arm926ejs -x mx,siemens,atmel"
- env:
- BUILDMAN="atmel"
- env:
BUILDMAN="boundary engicam toradex"
- env:
- JOB="Freescale ARM32"
BUILDMAN="freescale -x powerpc,m68k,aarch64"
- env:
- JOB="Freescale AArch64"
BUILDMAN="freescale&aarch64"
- env:
- JOB="i.MX6 (non-Freescale)"
BUILDMAN="mx6 -x freescale,toradex,boundary,engicam"
- env:
- JOB="i.MX (non-Freescale, non-i.MX6)"
BUILDMAN="mx -x freescale,mx6,toradex"
- env:
- BUILDMAN="k2"
- env:
- BUILDMAN="samsung socfpga"
- env:
- BUILDMAN="sun4i"
- env:
- BUILDMAN="sun5i"
- env:
- BUILDMAN="sun6i"
- env:
- BUILDMAN="sun7i"
- env:
- BUILDMAN="sun8i"
- env:
- BUILDMAN="sun9i"
- env:
- BUILDMAN="sun50i"
- env:
- JOB="Catch-all ARM"
BUILDMAN="arm -x arm11,arm7,arm9,aarch64,atmel,freescale,kirkwood,mvebu,siemens,tegra,uniphier,mx,samsung,sunxi,am33xx,omap,pxa,rockchip,toradex,socfpga,k2,xilinx"
- env:
- BUILDMAN="sandbox x86"
TOOLCHAIN="x86_64"
- env:
- BUILDMAN="kirkwood"
- env:
- BUILDMAN="mvebu"
- env:
- JOB="PXA"
- BUILDMAN="pxa -x toradex"
- env:
- BUILDMAN="m68k"
TOOLCHAIN="m68k"
- env:
- BUILDMAN="microblaze"
TOOLCHAIN="microblaze"
- env:
- BUILDMAN="mips"
TOOLCHAIN="mips"
- env:
- JOB="Non-Freescale PowerPC"
BUILDMAN="powerpc -x freescale"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="mpc85xx&freescale -x t208xrdb -x t4qds -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x b4860qds -x bsc91*"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t208xrdb corenet_ds"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t4qds b4860qds mpc83xx&freescale mpc86xx&freescale"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="t102*"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="p1_p2_rdb_pc"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="p1010rdb bsc91"
TOOLCHAIN="powerpc"
- env:
- BUILDMAN="siemens"
- env:
- JOB="tegra"
BUILDMAN="tegra -x toradex"
- env:
- JOB="am33xx"
BUILDMAN="am33xx -x siemens"
- env:
- BUILDMAN="omap"
- env:
- BUILDMAN="uniphier"
- env:
- JOB="Catch-all AArch64"
BUILDMAN="aarch64 -x tegra,freescale,mvebu,uniphier,sunxi,samsung,rockchip,xilinx"
- env:
- BUILDMAN="rockchip"
- env:
- JOB="sh"
BUILDMAN="sh -x arm"
TOOLCHAIN="sh"
- env:
- JOB="Xilinx (ARM)"
BUILDMAN="xilinx -x microblaze"
- env:
- BUILDMAN="xtensa"
TOOLCHAIN="xtensa-dc233c-elf"
- env:
- BUILDMAN="riscv"
TOOLCHAIN="riscv"
# QA jobs for code analytics
# static code analysis with cppcheck (we can add --enable=all later)
- env:
- JOB="cppcheck"
script:
- cppcheck --force --quiet --inline-suppr .
# search for TODO within source tree
- env:
- JOB="grep TODO"
script:
- grep -r TODO .
# search for FIXME within source tree
- env:
- JOB="grep FIXME HACK"
script:
- grep -r FIXME .
# search for HACK within source tree and ignore HACKKIT board
script:
- grep -r HACK . | grep -v HACKKIT
# some statistics about the code base
- env:
- JOB="sloccount"
script:
- sloccount .
# test/py
- env:
- TEST_PY_BD="sandbox"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
- env:
- TEST_PY_BD="sandbox_spl"
TEST_PY_TEST_SPEC="test_ofplatdata"
BUILDMAN="^sandbox$"
TOOLCHAIN="x86_64"
TEST_PY_TOOLS="yes"
- env:
- TEST_PY_BD="sandbox_flattree"
BUILDMAN="^sandbox_flattree$"
TOOLCHAIN="x86_64"
- env:
- TEST_PY_BD="vexpress_ca15_tc2"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^vexpress_ca15_tc2$"
- env:
- TEST_PY_BD="vexpress_ca9x4"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^vexpress_ca9x4$"
- env:
- TEST_PY_BD="integratorcp_cm926ejs"
TEST_PY_TEST_SPEC="not sleep"
TEST_PY_ID="--id qemu"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^integratorcp_cm926ejs$"
- env:
- TEST_PY_BD="qemu_arm"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="arm-softmmu"
BUILDMAN="^qemu_arm$"
- env:
- TEST_PY_BD="qemu_arm64"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="aarch64-softmmu"
BUILDMAN="^qemu_arm64$"
- env:
- TEST_PY_BD="qemu_mips"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips-softmmu"
BUILDMAN="^qemu_mips$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mipsel"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mipsel-softmmu"
BUILDMAN="^qemu_mipsel$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mips64"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips64-softmmu"
BUILDMAN="^qemu_mips64$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu_mips64el"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="mips64el-softmmu"
BUILDMAN="^qemu_mips64el$"
TOOLCHAIN="mips"
- env:
- TEST_PY_BD="qemu-ppce500"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="ppc-softmmu"
BUILDMAN="^qemu-ppce500$"
TOOLCHAIN="powerpc"
- env:
- TEST_PY_BD="qemu-x86"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="i386-softmmu"
BUILDMAN="^qemu-x86$"
TOOLCHAIN="x86_64"
BUILD_ROM="yes"
- env:
- TEST_PY_BD="zynq_zc702"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="arm-softmmu"
TEST_PY_ID="--id qemu"
BUILDMAN="^zynq_zc702$"
- env:
- TEST_PY_BD="xtfpga"
TEST_PY_TEST_SPEC="not sleep"
QEMU_TARGET="xtensa-softmmu"
TEST_PY_ID="--id qemu"
BUILDMAN="^xtfpga$"
TOOLCHAIN="xtensa-dc233c-elf"
# TODO make it perfect ;-r
CREDITS deleted 100644 → 0
View file @ 45fdb627
#
# Parts of the development effort for this project have been
# sponsored by SIEMENS AG, Austria. Thanks to SIEMENS for
# supporting an Open Source project!
#
#
# This is at least a partial credits-file of individual people that
# have contributed to the U-Boot project. It is sorted by name and
# formatted to allow easy grepping and beautification by scripts.
# The fields are: name (N), email (E), web-address (W), PGP key ID
# and fingerprint (P), description (D), and snail-mail address (S).
# Thanks,
#
# Wolfgang Denk
#----------
N: Dr. Bruno Achauer
E: bruno@exet-ag.de
D: Support for NetBSD (both as host and target system)
N: Guillaume Alexandre
E: guillaume.alexandre@gespac.ch
D: Add PCIPPC6 configuration
N: Pantelis Antoniou
E: panto@intracom.gr
D: NETVIA & NETPHONE board support, ARTOS support.
D: Support for Silicon Turnkey eXpress XTc
N: Pierre Aubert
E: <p.aubert@staubli.com>
D: Support for RPXClassic board
N: Yuli Barcohen
E: yuli@arabellasw.com
D: Unified support for Motorola MPC826xADS/MPC8272ADS/PQ2FADS boards.
D: Support for Zephyr Engineering ZPC.1900 board.
D: Support for Interphase iSPAN boards.
D: Support for Analogue&Micro Adder boards.
D: Support for Analogue&Micro Rattler boards.
W: http://www.arabellasw.com
N: Jerry van Baren
E: <vanbaren@cideas.com>
D: BedBug port to 603e core (MPC82xx). Code for enhanced memory test.
N: Pavel Bartusek
E: <pba@sysgo.com>
D: Reiserfs support
W: http://www.elinos.com
N: Andre Beaudin
E: <andre.beaudin@colubris.com>
D: PCMCIA, Ethernet, TFTP
N: Jon Benediktsson
E: jonb@marel.is
D: Support for Marel V37 board
N: Raphael Bossek
E: raphael.bossek@solutions4linux.de
D: 8xxrom-0.3.0
N: Cliff Brake
E: cliff.brake@gmail.com
D: Port to Vibren PXA255 IDP platform
W: http://www.vibren.com
W: http://bec-systems.com
N: Rick Bronson
E: rick@efn.org
D: Atmel AT91RM9200DK and NAND support
N: David Brown
E: DBrown03@harris.com
D: Extensions to 8xxrom-0.3.0
N: Oliver Brown
E: obrown@adventnetworks.com
D: Port to the gw8260 board
N: Jonathan De Bruyne
E: jonathan.debruyne@siemens.atea.be
D: Port to Siemens IAD210 board
N: Ken Chou
E: kchou@ieee.org
D: Support for A3000 SBC board
N: Conn Clark
E: clark@esteem.com
D: ESTEEM192E support
N: Magnus Damm
E: damm@opensource.se
D: 8xxrom
N: Richard Danter
E: richard.danter@windriver.com
D: Support for Wind River PPMC 7xx/74xx boards
N: George G. Davis
E: gdavis@mvista.com
D: Board ports for ADS GraphicsClient+ and Intel Assabet
N: Arun Dharankar
E: ADharankar@ATTBI.Com
D: threads / scheduler example code
N: K?ri Dav??sson
E: kd@flaga.is
D: FLAGA DM Support
N: Wolfgang Denk
E: wd@denx.de
D: U-Boot initial version, continuing maintenance, ARMBoot merge
W: http://www.denx.de
N: Dan A. Dickey
E: ddickey@charter.net
D: FADS Support
N: James F. Dougherty
E: jfd@GigabitNetworks.COM
D: Port to the MOUSSE board
N: Mike Dunn
E: mikedunn@newsguy.com
D: Palmtreo680 board, docg4 nand flash driver
N: Dave Ellis
E: DGE@sixnetio.com
D: EEPROM Speedup, SXNI855T port
N: Daniel Engstr?m
E: daniel@omicron.se
D: x86 port, Support for sc520_cdp board
N: Hayden Fraser
E: Hayden.Fraser@freescale.com
D: Support for ColdFire MCF5253
W: www.freescale.com
N: Dr. Wolfgang Grandegger
E: wg@denx.de
D: Support for Interphase 4539 T1/E1/J1 PMC, PN62, CCM, SCM boards
W: www.denx.de
N: Peter Figuli
E: peposh@etc.sk
D: Support for WEP EP250 (PXA) board
N: Thomas Frieden
E: ThomasF@hyperion-entertainment.com
D: Support for AmigaOne
N: Paul Gortmaker
E: paul.gortmaker@windriver.com
D: Support for WRS SBC8347/8349 boards
N: Frank Gottschling
E: fgottschling@eltec.de
D: Support for ELTEC MHPC/ELPPC boards, cfb-console, i8042, SMI LynxEM
W: www.eltec.de
N: Marius Groeger
E: mgroeger@sysgo.de
D: MBX Support, board specific function interface, EST SBC8260 support; initial support for StrongARM (LART), ARM720TDMI (implementa A7)
W: www.elinos.com
N: Kirk Haderlie
E: khaderlie@vividimage.com
D: Added TFTP to 8xxrom (-> 0.3.1)
N: Chris Hallinan
E: clh@net1plus.com
D: DHCP Support
N: Anne-Sophie Harnois
E: Anne-Sophie.Harnois@nextream.fr
D: Port to Walnut405 board
N: Andreas Heppel
E: aheppel@sysgo.de
D: CPU Support for MPC 75x
N: Josh Huber
E: huber@alum.wpi.edu
D: Port to the Galileo Evaluation Board, and the MPC74xx cpu series.
W: http://www.mclx.com/
H: Stuart Hughes
E: stuarth@lineo.com
D: Port to MPC8260ADS board
H: Rich Ireland
E: r.ireland@computer.org
D: FPGA device configuration driver
H: Mark Jackson
E: mpfj@mimc.co.uk
D: Port to MIMC200 board
N: Gary Jennejohn
E: garyj@jennejohn.org
D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
W: www.denx.de
N: Murray Jensen
E: Murray.Jensen@csiro.au
D: Initial 8260 support; GDB support
D: Port to Cogent+Hymod boards; Hymod Board Database
N: Yoo. Jonghoon
E: yooth@ipone.co.kr
D: Added port to the RPXlite board
N: Mark Jonas
E: mark.jonas@freescale.com
D: Support for Freescale Total5200 platform
W: http://www.mobilegt.com/
N: Mark Jonas
E: mark.jonas@de.bosch.com
D: Support for MPR2 board
N: Sam Song
E: samsongshu@yahoo.com.cn
D: Port to the RPXlite_DW board
N: Brad Kemp
E: Brad.Kemp@seranoa.com
D: Port to Windriver ppmc8260 board
N: Sangmoon Kim
E: dogoil@etinsys.com
D: Support for debris board
D: Support for KVME080 board
N: Frederick W. Klatt
E: fred.klatt@windriver.com
D: Support for Wind River SBC8540/SBC8560 boards
N: Thomas Koeller
E: tkoeller@gmx.net
D: Port to Motorola Sandpoint 3 (MPC8240)
N: Raghu Krishnaprasad
E: Raghu.Krishnaprasad@fci.com
D: Support for Adder-II MPC852T evaluation board
W: http://www.forcecomputers.com
N: Sergey Kubushyn
E: ksi@koi8.net
D: Support for various TI DaVinci based boards.
N: Bernhard Kuhn
E: bkuhn@metrowerks.com
D Support for Coldfire CPU; Support for Motorola M5272C3 and M5282EVB boards
N: Prakash Kumar
E: prakash@embedx.com
D Support for Intrinsyc CERF PXA250 board.
N: Thomas Lange
E: thomas@corelatus.se
D: Support for GTH, GTH2 and dbau1x00 boards; lots of PCMCIA fixes
N: The LEOX team
E: team@leox.org
D: Support for LEOX boards, DS164x RTC
W: http://www.leox.org
N: TsiChung Liew
E: Tsi-Chung.Liew@freescale.com
D: Support for ColdFire MCF523x, MCF532x, MCF5445x, MCF547x_8x
W: www.freescale.com
N: Leif Lindholm
E: leif.lindholm@i3micro.com
D: Support for AMD dbau1550 board.
N: Stephan Linz
E: linz@li-pro.net
D: Support for Nios Stratix Development Kit (DK-1S10)
D: Support for SSV ADNP/ESC1 (Nios Cyclone)
W: http://www.li-pro.net
N: Dave Liu
E: daveliu@freescale.com
D: Support for MPC8315, MPC832x, MPC8360, MPC837x
W: www.freescale.com
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
N: James MacAulay
E: james.macaulay@amirix.com
D: Suppport for Amirix AP1000
W: www.amirix.com
N: Dan Malek
E: dan@embeddedalley.com
D: FADSROM, the grandfather of all of this
D: Support for Silicon Turnkey eXpress XTc
N: Andrea "llandre" Marson
E: andrea.marson@dave-tech.it
D: Port to PPChameleonEVB board
W: www.dave-tech.it
N: Reinhard Meyer
E: r.meyer@emk-elektronik.de
D: Port to EMK TOP860 Module
N: Jay Monkman
E: jtm@smoothsmoothie.com
D: EST SBC8260 support
N: Frank Morauf
E: frank.morauf@salzbrenner.com
D: Support for Embedded Planet RPX Super Board
N: David M?ller
E: d.mueller@elsoft.ch
D: Support for Samsung ARM920T SMDK2410 eval board
N: Scott McNutt
E: smcnutt@psyent.com
D: Support for Altera Nios-32 CPU
D: Support for Altera Nios-II CPU
D: Support for Nios Cyclone Development Kit (DK-1C20)
W: http://www.psyent.com
N: Rolf Offermanns
E: rof@sysgo.de
D: Initial support for SSV-DNP1110, SMC91111 driver
W: www.elinos.com
N: John Otken
E: jotken@softadvances.com
D: Support for AMCC Luan 440SP board
N: Tolunay Orkun
E: torkun@nextio.com
D: Support for Cogent CSB272 & CSB472 boards
N: Keith Outwater
E: keith_outwater@mvis.com
D: Support for generic/custom MPC860T boards (GEN860T, GEN860T_SC)
N: Frank Panno
E: fpanno@delphintech.com
D: Support for Embedded Planet EP8260 Board
N: Denis Peter
E: d.peter@mpl.ch
D: Support for 4xx SCSI, floppy, CDROM, CT69000 video, ...
D: Support for PIP405 board
D: Support for MIP405 board
N: Dave Peverley
E: dpeverley@mpc-data.co.uk
W: http://www.mpc-data.co.uk
D: OMAP730 P2 board support
N: Bill Pitts
E: wlp@mindspring.com
D: BedBug embedded debugger code
N: Daniel Poirot
E: dan.poirot@windriver.com
D: Support for the Wind River sbc405, sbc8240 board
W: http://www.windriver.com
N: Stelian Pop
E: stelian@popies.net
D: Atmel AT91CAP9ADK support
N: Ricardo Ribalda Delgado
E: ricardo.ribalda@uam.es
D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
D: Virtex ppc440 generic architecture
D: Virtex ppc405 generic architecture
W: http://www.ii.uam.es/~rribalda
N: Stefan Roese
E: sr@denx.de
D: AMCC PPC4xx Support
W: http://www.denx.de
N: Erwin Rol
E: erwin@muffin.org
D: boot support for RTEMS
N: Paul Ruhland
E: pruhland@rochester.rr.com
D: Port to Logic Zoom LH7A40x SDK board(s)
N: Neil Russell
E: caret@c-side.com
D: Author of LiMon-1.4.2, which contributed some ideas
N: Travis B. Sawyer
E: travis.sawyer@sandburst.com
D: Support for AMCC PPC440GX, XES XPedite1000 440GX PrPMC board. AMCC 440gx Ref Platform (Ocotea)
N: Paolo Scaffardi
E: arsenio@tin.it
D: FADS823 configuration, MPC823 video support, I2C, wireless keyboard, lots more
N: Andre Schwarz
E: andre.schwarz@matrix-vision.de
D: Support for Matrix Vision boards (MVBLM7/MVBC_P/MVSMR)
N: Robert Schwebel
E: r.schwebel@pengutronix.de
D: Support for csb226 and innokom boards (PXA2xx)
N: Aaron Sells
E: sellsa@embeddedplanet.com
D: Support for EP82xxM
N: Art Shipkowski
E: art@videon-central.com
D: Support for NetSilicon NS7520
D: Support for ColdFire MCF5275
N: Jeremy C. Andrus
E: jeremy@jeremya.com
D: ColdFire MCF5249 initialization code
W: jeremya.com
N: Michal Simek
E: monstr@monstr.eu
D: Support for Microblaze, ML401, XUPV2P board
W: www.monstr.eu
N: Yasushi Shoji
E: yashi@atmark-techno.com
D: Support for Xilinx MicroBlaze, for Atmark Techno SUZAKU FPGA board
N: Kurt Stremerch
E: kurt@exys.be
D: Support for Exys XSEngine board
N: Andrea Scian
E: andrea.scian@dave-tech.it
D: Port to B2 board
W: www.dave-tech.it
N: Timur Tabi
E: timur@freescale.com
D: Support for MPC8349E-mITX
W: www.freescale.com
N: Rob Taylor
E: robt@flyingpig.com
D: Port to MBX860T and Sandpoint8240
N: Erik Theisen
E: etheisen@mindspring.com
D: MBX8xx and many other patches
N: Jim Thompson
E: jim@musenki.com
D: Support for MUSENKI board
N: Rune Torgersen
E: <runet@innovsys.com>
D: Support for Motorola MPC8266ADS board
N: Greg Ungerer
E: greg.ungerer@opengear.com
D: Support for ks8695 CPU, and OpenGear cmXXXX boards
N: David Updegraff
E: dave@cray.com
D: Port to Cray L1 board; DHCP vendor extensions
N: Christian Vejlbo
E: christian.vejlbo@tellabs.com
D: FADS860T ethernet support
N: Robert Whaley
E: rwhaley@applieddata.net
D: Port to ARM PXA27x adsvix SBC
N: Martin Winistoerfer
E: martinwinistoerfer@gmx.ch
D: Port to MPC555/556 microcontrollers and support for cmi board
N: David Wu
E: support@arcturusnetworks.com
D: Mercury Security EP2500
W: http://www.arcturusnetworks.com
N: Ming-Len Wu
E: minglen_wu@techware.com.tw
D: Motorola MX1ADS board support
W: http://www.techware.com.tw/
N: Xianghua Xiao
E: x.xiao@motorola.com
D: Support for Motorola 85xx(PowerQUICC III) chip, MPC8540ADS and MPC8560ADS boards.
N: John Zhan
E: zhanz@sinovee.com
D: Support for SinoVee Microsystems SC8xx SBC
N: Alex Zuepke
E: azu@sysgo.de
D: Overall improvements on StrongARM, ARM720TDMI; Support for Tuxscreen; initial PCMCIA support for ARM
W: www.elinos.com
N: Nobuhiro Iwamatsu
E: iwamatsu@nigauri.org
D: Support for SuperH, MS7750SE01 and MS7722SE01 boards.
W: http://www.nigauri.org/~iwamatsu/
N: Alan Lu
E: alnalu001@gmail.com
D: Support for Artila M-501 starter kit
W: http://www.artila.com/
N: Kimmo Leppala
E: kimmo.leppala@sysart.fi
D: Support for Artila M-501 starter kit
W: http://www.sysart.fi/
N: Timo Tuunainen
E: timo.tuunainen@sysart.fi
D: Support for Artila M-501 starter kit
W: http://www.sysart.fi/
N: Philip Balister
E: philip@opensdr.com
D: Port to Lyrtech SFFSDR development board.
W: www.opensdr.com
Documentation/devicetree/bindings/phy/no-op.txt 0 → 100644
View file @ 8e809399
NOP PHY driver
This driver is used to stub PHY operations in a driver (USB, SATA).
This is useful when the 'client' driver (USB, SATA, ...) uses the PHY framework
and there is no actual PHY harwdare to drive.
Required properties:
- compatible : must contain "nop-phy"
- #phy-cells : must contain <0>
Example:
nop_phy {
compatible = "nop-phy";
#phy-cells = <0>;
};
Documentation/devicetree/bindings/phy/phy-stm32-usbphyc.txt 0 → 100644
View file @ 8e809399
STMicroelectronics STM32 USB HS PHY controller
The STM32 USBPHYC block contains a dual port High Speed UTMI+ PHY and a UTMI
switch. It controls PHY configuration and status, and the UTMI+ switch that
selects either OTG or HOST controller for the second PHY port. It also sets
PLL configuration.
USBPHYC
|_ PLL
|
|_ PHY port#1 _________________ HOST controller
| _ |
| / 1|________________|
|_ PHY port#2 ----| |________________
| \_0| |
|_ UTMI switch_______| OTG controller
Phy provider node
=================
Required properties:
- compatible: must be "st,stm32mp1-usbphyc"
- reg: address and length of the usb phy control register set
- clocks: phandle + clock specifier for the PLL phy clock
- #address-cells: number of address cells for phys sub-nodes, must be <1>
- #size-cells: number of size cells for phys sub-nodes, must be <0>
Optional properties:
- assigned-clocks: phandle + clock specifier for the PLL phy clock
- assigned-clock-parents: the PLL phy clock parent
- resets: phandle + reset specifier
Required nodes: one sub-node per port the controller provides.
Phy sub-nodes
==============
Required properties:
- reg: phy port index
- phy-supply: phandle to the regulator providing 3V3 power to the PHY,
see phy-bindings.txt in the same directory.
- vdda1v1-supply: phandle to the regulator providing 1V1 power to the PHY
- vdda1v8-supply: phandle to the regulator providing 1V8 power to the PHY
- #phy-cells: see phy-bindings.txt in the same directory, must be <0> for PHY
port#1 and must be <1> for PHY port#2, to select USB controller
Example:
usbphyc: usb-phy@5a006000 {
compatible = "st,stm32mp1-usbphyc";
reg = <0x5a006000 0x1000>;
clocks = <&rcc_clk USBPHY_K>;
resets = <&rcc_rst USBPHY_R>;
#address-cells = <1>;
#size-cells = <0>;
usbphyc_port0: usb-phy@0 {
reg = <0>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <0>;
};
usbphyc_port1: usb-phy@1 {
reg = <1>;
phy-supply = <&vdd_usb>;
vdda1v1-supply = <&reg11>;
vdda1v8-supply = <&reg18>
#phy-cells = <1>;
};
};
Documentation/devicetree/bindings/rtc/brcm,brcmstb-waketimer.txt 0 → 100644
View file @ 8e809399
Broadcom STB wake-up Timer
The Broadcom STB wake-up timer provides a 27Mhz resolution timer, with the
ability to wake up the system from low-power suspend/standby modes.
Required properties:
- compatible : should contain "brcm,brcmstb-waketimer"
- reg : the register start and length for the WKTMR block
- interrupts : The TIMER interrupt
- interrupt-parent: The phandle to the Always-On (AON) Power Management (PM) L2
interrupt controller node
- clocks : The phandle to the UPG fixed clock (27Mhz domain)
Example:
waketimer@f0411580 {
compatible = "brcm,brcmstb-waketimer";
reg = <0xf0411580 0x14>;
interrupts = <0x3>;
interrupt-parent = <&aon_pm_l2_intc>;
clocks = <&upg_fixed>;
};
Kbuild 0 → 100644
View file @ 8e809399
#
# Kbuild for top-level directory of U-Boot
# This file takes care of the following:
# 1) Generate generic-asm-offsets.h
# 2) Generate asm-offsets.h
# Default sed regexp - multiline due to syntax constraints
define sed-y
"s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:->::; p;}"
endef
# Use filechk to avoid rebuilds when a header changes, but the resulting file
# does not
define filechk_offsets
(set -e; \
echo "#ifndef $2"; \
echo "#define $2"; \
echo "/*"; \
echo " * DO NOT MODIFY."; \
echo " *"; \
echo " * This file was generated by Kbuild"; \
echo " */"; \
echo ""; \
sed -ne $(sed-y); \
echo ""; \
echo "#endif" )
endef
#####
# 1) Generate generic-asm-offsets.h
generic-offsets-file := include/generated/generic-asm-offsets.h
always := $(generic-offsets-file)
targets := lib/asm-offsets.s
# We use internal kbuild rules to avoid the "is up to date" message from make
lib/asm-offsets.s: lib/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(generic-offsets-file): lib/asm-offsets.s FORCE
$(call filechk,offsets,__GENERIC_ASM_OFFSETS_H__)
#####
# 2) Generate asm-offsets.h
#
ifneq ($(wildcard $(srctree)/arch/$(ARCH)/lib/asm-offsets.c),)
offsets-file := include/generated/asm-offsets.h
endif
always += $(offsets-file)
targets += arch/$(ARCH)/lib/asm-offsets.s
CFLAGS_asm-offsets.o := -DDO_DEPS_ONLY
# We use internal kbuild rules to avoid the "is up to date" message from make
arch/$(ARCH)/lib/asm-offsets.s: arch/$(ARCH)/lib/asm-offsets.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,cc_s_c)
$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
Kconfig 0 → 100644
View file @ 8e809399
#
# For a description of the syntax of this configuration file,
# see the file Documentation/kbuild/kconfig-language.txt in the
# Linux kernel source tree.
#
mainmenu "U-Boot $UBOOTVERSION Configuration"
config UBOOTVERSION
string
option env="UBOOTVERSION"
# Allow defaults in arch-specific code to override any given here
source "arch/Kconfig"
menu "General setup"
config BROKEN
bool
help
This option cannot be enabled. It is used as dependency
for broken and incomplete features.
config LOCALVERSION
string "Local version - append to U-Boot release"
help
Append an extra string to the end of your U-Boot version.
This will show up in your boot log, for example.
The string you set here will be appended after the contents of
any files with a filename matching localversion* in your
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
default y
help
This will try to automatically determine if the current tree is a
release tree by looking for Git tags that belong to the current
top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
if a Git-based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION.
(The actual string used here is the first eight characters produced
by running the command:
$ git rev-parse --verify HEAD
which is done within the script "scripts/setlocalversion".)
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size"
default y
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller U-Boot image.
This option is enabled by default for U-Boot.
config CC_COVERAGE
bool "Enable code coverage analysis"
depends on SANDBOX
help
Enabling this option will pass "--coverage" to gcc to compile
and link code instrumented for coverage analysis.
config DISTRO_DEFAULTS
bool "Select defaults suitable for booting general purpose Linux distributions"
imply USE_BOOTCOMMAND
select CMD_BOOTZ if ARM && !ARM64
select CMD_BOOTI if ARM64
select CMD_DHCP if CMD_NET
select CMD_PING if CMD_NET
select CMD_PXE if NET
select CMD_ENV_EXISTS
select CMD_EXT2
select CMD_EXT4
select CMD_FAT
select CMD_FS_GENERIC
imply CMD_MII if NET
select CMD_PART if PARTITIONS
select HUSH_PARSER
select CMDLINE_EDITING
select AUTO_COMPLETE
select SYS_LONGHELP
select SUPPORT_RAW_INITRD
select ENV_VARS_UBOOT_CONFIG
help
Select this to enable various options and commands which are suitable
for building u-boot for booting general purpose Linux distributions.
config ENV_VARS_UBOOT_CONFIG
bool "Add arch, board, vendor and soc variables to default environment"
help
Define this in order to add variables describing the
U-Boot build configuration to the default environment.
These will be named arch, cpu, board, vendor, and soc.
Enabling this option will cause the following to be defined:
- CONFIG_SYS_ARCH
- CONFIG_SYS_CPU
- CONFIG_SYS_BOARD
- CONFIG_SYS_VENDOR
- CONFIG_SYS_SOC
config NR_DRAM_BANKS
int "Number of DRAM banks"
default 4
help
This defines the number of DRAM banks.
config SYS_BOOT_GET_CMDLINE
bool "Enable kernel command line setup"
help
Enables allocating and saving kernel cmdline in space between
"bootm_low" and "bootm_low" + BOOTMAPSZ.
config SYS_BOOT_GET_KBD
bool "Enable kernel board information setup"
help
Enables allocating and saving a kernel copy of the bd_info in
space between "bootm_low" and "bootm_low" + BOOTMAPSZ.
config SYS_MALLOC_F
bool "Enable malloc() pool before relocation"
default y if DM
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SYS_MALLOC_F_LEN
hex "Size of malloc() pool before relocation"
depends on SYS_MALLOC_F
default 0x1000 if AM33XX
default 0x400
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config SPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in SPL before relocation"
depends on SYS_MALLOC_F
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
config TPL_SYS_MALLOC_F_LEN
hex "Size of malloc() pool in TPL before relocation"
depends on SYS_MALLOC_F
default SYS_MALLOC_F_LEN
help
Before relocation, memory is very limited on many platforms. Still,
we can provide a small malloc() pool if needed. Driver model in
particular needs this to operate, so that it can allocate the
initial serial device and any others that are needed.
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
default y
help
This option allows certain base U-Boot options and settings
to be disabled or tweaked. This is for specialized
environments which can tolerate a "non-standard" U-Boot.
Use this only if you really know what you are doing.
if EXPERT
config SYS_MALLOC_CLEAR_ON_INIT
bool "Init with zeros the memory reserved for malloc (slow)"
default y
help
This setting is enabled by default. The reserved malloc
memory is initialized with zeros, so first malloc calls
will return the pointer to the zeroed memory. But this
slows the boot time.
It is recommended to disable it, when CONFIG_SYS_MALLOC_LEN
value, has more than few MiB, e.g. when uses bzip2 or bmp logo.
Then the boot time can be significantly reduced.
Warning:
When disabling this, please check if malloc calls, maybe
should be replaced by calloc - if one expects zeroed memory.
config TOOLS_DEBUG
bool "Enable debug information for tools"
help
Enable generation of debug information for tools such as mkimage.
This can be used for debugging purposes. With debug information
it is possible to set breakpoints on particular lines, single-step
debug through the source code, etc.
endif # EXPERT
config PHYS_64BIT
bool "64bit physical address support"
help
Say Y here to support 64bit physical memory address.
This can be used not only for 64bit SoCs, but also for
large physical address extention on 32bit SoCs.
config BUILD_ROM
bool "Build U-Boot as BIOS replacement"
depends on X86
help
This option allows to build a ROM version of U-Boot.
The build process generally requires several binary blobs
which are not shipped in the U-Boot source tree.
Please, see doc/README.x86 for details.
endmenu # General setup
menu "Boot images"
config ANDROID_BOOT_IMAGE
bool "Enable support for Android Boot Images"
default y if FASTBOOT
help
This enables support for booting images which use the Android
image format header.
config FIT
bool "Support Flattened Image Tree"
select MD5
select SHA1
help
This option allows you to boot the new uImage structure,
Flattened Image Tree. FIT is formally a FDT, which can include
images of various types (kernel, FDT blob, ramdisk, etc.)
in a single blob. To boot this new uImage structure,
pass the address of the blob to the "bootm" command.
FIT is very flexible, supporting compression, multiple images,
multiple configurations, verification through hashing and also
verified boot (secure boot using RSA).
if FIT
config FIT_ENABLE_SHA256_SUPPORT
bool "Support SHA256 checksum of FIT image contents"
select SHA256
default y
help
Enable this to support SHA256 checksum of FIT image contents. A
SHA256 checksum is a 256-bit (32-byte) hash value used to check that
the image contents have not been corrupted. SHA256 is recommended
for use in secure applications since (as at 2016) there is no known
feasible attack that could produce a 'collision' with differing
input data. Use this for the highest security. Note that only the
SHA256 variant is supported: SHA512 and others are not currently
supported in U-Boot.
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on DM
select RSA
select HASH
help
This option enables signature verification of FIT uImages,
using a hash signed and verified using RSA. If
CONFIG_SHA_PROG_HW_ACCEL is defined, i.e support for progressive
hashing is available using hardware, then the RSA library will use
it. See doc/uImage.FIT/signature.txt for more details.
WARNING: When relying on signed FIT images with a required signature
check the legacy image format is disabled by default, so that
unsigned images cannot be loaded. If a board needs the legacy image
format support in this case, enable it using
CONFIG_IMAGE_FORMAT_LEGACY.
config FIT_VERBOSE
bool "Show verbose messages when FIT images fail"
help
Generally a system will have valid FIT images so debug messages
are a waste of code space. If you are debugging your images then
you can enable this option to get more verbose information about
failures.
config FIT_BEST_MATCH
bool "Select the best match for the kernel device tree"
help
When no configuration is explicitly selected, default to the
one whose fdt's compatibility field best matches that of
U-Boot itself. A match is considered "best" if it matches the
most specific compatibility entry of U-Boot's fdt's root node.
The order of entries in the configuration's fdt is ignored.
config FIT_IMAGE_POST_PROCESS
bool "Enable post-processing of FIT artifacts after loading by U-Boot"
depends on TI_SECURE_DEVICE
help
Allows doing any sort of manipulation to blobs after they got extracted
from FIT images like stripping off headers or modifying the size of the
blob, verification, authentication, decryption etc. in a platform or
board specific way. In order to use this feature a platform or board-
specific implementation of board_fit_image_post_process() must be
provided. Also, anything done during this post-processing step would
need to be comprehended in how the images were prepared before being
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
if SPL
config SPL_FIT
bool "Support Flattened Image Tree within SPL"
depends on SPL
select SPL_OF_LIBFDT
config SPL_FIT_PRINT
bool "Support FIT printing within SPL"
depends on SPL_FIT
help
Support printing the content of the fitImage in a verbose manner in SPL.
config SPL_FIT_SIGNATURE
bool "Enable signature verification of FIT firmware within SPL"
depends on SPL_DM
select SPL_FIT
select SPL_RSA
config SPL_LOAD_FIT
bool "Enable SPL loading U-Boot as a FIT"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
of the build. This contains U-Boot along with information as to
where it should be loaded. This option instead enables generation
of a FIT (Flat Image Tree) which provides more flexibility. In
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
config SPL_LOAD_FIT_FULL
bool "Enable SPL loading U-Boot as a FIT"
select SPL_FIT
help
Normally with the SPL framework a legacy image is generated as part
of the build. This contains U-Boot along with information as to
where it should be loaded. This option instead enables generation
of a FIT (Flat Image Tree) which provides more flexibility. In
particular it can handle selecting from multiple device tree
and passing the correct one to U-Boot.
config SPL_FIT_IMAGE_POST_PROCESS
bool "Enable post-processing of FIT artifacts after loading by the SPL"
depends on SPL_LOAD_FIT
help
Allows doing any sort of manipulation to blobs after they got extracted
from the U-Boot FIT image like stripping off headers or modifying the
size of the blob, verification, authentication, decryption etc. in a
platform or board specific way. In order to use this feature a platform
or board-specific implementation of board_fit_image_post_process() must
be provided. Also, anything done during this post-processing step would
need to be comprehended in how the images were prepared before being
injected into the FIT creation (i.e. the blobs would have been pre-
processed before being added to the FIT image).
config SPL_FIT_SOURCE
string ".its source file for U-Boot FIT image"
depends on SPL_FIT
help
Specifies a (platform specific) FIT source file to generate the
U-Boot FIT image. This could specify further image to load and/or
execute.
config SPL_FIT_GENERATOR
string ".its file generator script for U-Boot FIT image"
depends on SPL_FIT
default "board/sunxi/mksunxi_fit_atf.sh" if SPL_LOAD_FIT && ARCH_SUNXI
help
Specifies a (platform specific) script file to generate the FIT
source file used to build the U-Boot FIT image file. This gets
passed a list of supported device tree file stub names to
include in the generated image.
endif # SPL
endif # FIT
config IMAGE_FORMAT_LEGACY
bool "Enable support for the legacy image format"
default y if !FIT_SIGNATURE
help
This option enables the legacy image format. It is enabled by
default for backward compatibility, unless FIT_SIGNATURE is
set where it is disabled so that unsigned images cannot be
loaded. If a board needs the legacy image format support in this
case, enable it here.
config OF_BOARD_SETUP
bool "Set up board-specific details in device tree before boot"
depends on OF_LIBFDT
help
This causes U-Boot to call ft_board_setup() before booting into
the Operating System. This function can set up various
board-specific information in the device tree for use by the OS.
The device tree is then passed to the OS.
config OF_SYSTEM_SETUP
bool "Set up system-specific details in device tree before boot"
depends on OF_LIBFDT
help
This causes U-Boot to call ft_system_setup() before booting into
the Operating System. This function can set up various
system-specific information in the device tree for use by the OS.
The device tree is then passed to the OS.
config OF_STDOUT_VIA_ALIAS
bool "Update the device-tree stdout alias from U-Boot"
depends on OF_LIBFDT
help
This uses U-Boot's serial alias from the aliases node to update
the device tree passed to the OS. The "linux,stdout-path" property
in the chosen node is set to point to the correct serial node.
This option currently references CONFIG_CONS_INDEX, which is
incorrect when used with device tree as this option does not
exist / should not be used.
config SYS_EXTRA_OPTIONS
string "Extra Options (DEPRECATED)"
help
The old configuration infrastructure (= mkconfig + boards.cfg)
provided the extra options field. If you have something like
"HAS_BAR,BAZ=64", the optional options
#define CONFIG_HAS
#define CONFIG_BAZ 64
will be defined in include/config.h.
This option was prepared for the smooth migration from the old
configuration to Kconfig. Since this option will be removed sometime,
new boards should not use this option.
config SYS_TEXT_BASE
depends on !NIOS2 && !XTENSA
depends on !EFI_APP
default 0x80800000 if ARCH_OMAP2PLUS
default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S
default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I
default 0x42e00000 if ARCH_SUNXI && MACH_SUN8I_V3S
hex "Text Base"
help
The address in memory that U-Boot will be running from, initially.
config SYS_CLK_FREQ
depends on ARC || ARCH_SUNXI
int "CPU clock frequency"
help
TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
config ARCH_FIXUP_FDT_MEMORY
bool "Enable arch_fixup_memory_banks() call"
default y
help
Enable FDT memory map syncup before OS boot. This feature can be
used for booting OS with different memory setup where the part of
the memory location should be used for different purpose.
endmenu # Boot images
source "api/Kconfig"
source "common/Kconfig"
source "cmd/Kconfig"
source "disk/Kconfig"
source "dts/Kconfig"
source "env/Kconfig"
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
source "test/Kconfig"
Licenses/OFL.txt 0 → 100644
View file @ 8e809399
Copyright (c) 2010, Andrey Makarov (makarov@bmstu.ru, mka-at-mailru@mail.ru),
with Reserved Font Name Anka/Coder Narrow.
Copyright (c) 2011, Pablo Impallari (www.impallari.com|impallari@gmail.com),
Rodrigo Fuenzalida (www.rfuenzalida.com) with Reserved Font Name Cantora.
This Font Software is licensed under the SIL Open Font License, Version 1.1.
This license is copied below, and is also available with a FAQ at:
http://scripts.sil.org/OFL
-----------------------------------------------------------
SIL OPEN FONT LICENSE Version 1.1 - 26 February 2007
-----------------------------------------------------------
PREAMBLE
The goals of the Open Font License (OFL) are to stimulate worldwide
development of collaborative font projects, to support the font creation
efforts of academic and linguistic communities, and to provide a free and
open framework in which fonts may be shared and improved in partnership
with others.
The OFL allows the licensed fonts to be used, studied, modified and
redistributed freely as long as they are not sold by themselves. The
fonts, including any derivative works, can be bundled, embedded,
redistributed and/or sold with any software provided that any reserved
names are not used by derivative works. The fonts and derivatives,
however, cannot be released under any other type of license. The
requirement for fonts to remain under this license does not apply
to any document created using the fonts or their derivatives.
DEFINITIONS
"Font Software" refers to the set of files released by the Copyright
Holder(s) under this license and clearly marked as such. This may
include source files, build scripts and documentation.
"Reserved Font Name" refers to any names specified as such after the
copyright statement(s).
"Original Version" refers to the collection of Font Software components as
distributed by the Copyright Holder(s).
"Modified Version" refers to any derivative made by adding to, deleting,
or substituting -- in part or in whole -- any of the components of the
Original Version, by changing formats or by porting the Font Software to a
new environment.
"Author" refers to any designer, engineer, programmer, technical
writer or other person who contributed to the Font Software.
PERMISSION & CONDITIONS
Permission is hereby granted, free of charge, to any person obtaining
a copy of the Font Software, to use, study, copy, merge, embed, modify,
redistribute, and sell modified and unmodified copies of the Font
Software, subject to the following conditions:
1) Neither the Font Software nor any of its individual components,
in Original or Modified Versions, may be sold by itself.
2) Original or Modified Versions of the Font Software may be bundled,
redistributed and/or sold with any software, provided that each copy
contains the above copyright notice and this license. These can be
included either as stand-alone text files, human-readable headers or
in the appropriate machine-readable metadata fields within text or
binary files as long as those fields can be easily viewed by the user.
3) No Modified Version of the Font Software may use the Reserved Font
Name(s) unless explicit written permission is granted by the corresponding
Copyright Holder. This restriction only applies to the primary font name as
presented to the users.
4) The name(s) of the Copyright Holder(s) or the Author(s) of the Font
Software shall not be used to promote, endorse or advertise any
Modified Version, except to acknowledge the contribution(s) of the
Copyright Holder(s) and the Author(s) or with their explicit written
permission.
5) The Font Software, modified or unmodified, in part or in whole,
must be distributed entirely under this license, and must not be
distributed under any other license. The requirement for fonts to
remain under this license does not apply to any document created
using the Font Software.
TERMINATION
This license becomes null and void if any of the above conditions are
not met.
DISCLAIMER
THE FONT SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
OF COPYRIGHT, PATENT, TRADEMARK, OR OTHER RIGHT. IN NO EVENT SHALL THE
COPYRIGHT HOLDER BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
INCLUDING ANY GENERAL, SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE THE FONT SOFTWARE OR FROM
OTHER DEALINGS IN THE FONT SOFTWARE.
Licenses/README
View file @ 8e809399
SPDX-License-Identifier: GPL-2.0
U-Boot is Free Software. It is copyrighted by Wolfgang Denk and
many others who contributed code (see the actual source code and the
git commit messages for details). You can redistribute U-Boot and/or
......@@ -31,22 +33,121 @@ information, ...) which makes automatic processing a nightmare.
To make this easier, such license headers in the source files will be
replaced with a single line reference to Unique License Identifiers
as defined by the Linux Foundation's SPDX project [1]. For example,
in a source file the full "GPL v2.0 or later" header text will be
replaced by a single line:
as defined by the Linux Foundation's SPDX project [1].
If a "SPDX-License-Identifier:" line references more than one Unique
License Identifier, then this means that the respective file can be
used under the terms of either of these licenses, i. e. with
SPDX-License-Identifier: GPL-2.0+
SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
you can choose between GPL-2.0+ and BSD-3-Clause licensing.
We use the SPDX Unique License Identifiers here; these are available
at [2].
License identifier syntax
-------------------------
1. Placement:
The SPDX license identifier in U-Boot files shall be added at the first
possible line in a file which can contain a comment. For the majority
or files this is the first line, except for scripts which require the
'#!PATH_TO_INTERPRETER' in the first line. For those scripts the SPDX
identifier goes into the second line.
|
2. Style:
The SPDX license identifier is added in form of a comment. The comment
style depends on the file type::
C source: // SPDX-License-Identifier: <SPDX License Expression>
C header: /* SPDX-License-Identifier: <SPDX License Expression> */
ASM: /* SPDX-License-Identifier: <SPDX License Expression> */
scripts: # SPDX-License-Identifier: <SPDX License Expression>
.rst: .. SPDX-License-Identifier: <SPDX License Expression>
.dts{i}: // SPDX-License-Identifier: <SPDX License Expression>
If a specific tool cannot handle the standard comment style, then the
appropriate comment mechanism which the tool accepts shall be used. This
is the reason for having the "/\* \*/" style comment in C header
files. There was build breakage observed with generated .lds files where
'ld' failed to parse the C++ comment. This has been fixed by now, but
there are still older assembler tools which cannot handle C++ style
comments.
|
3. Syntax:
A <SPDX License Expression> is either an SPDX short form license
identifier found on the SPDX License List, or the combination of two
SPDX short form license identifiers separated by "WITH" when a license
exception applies. When multiple licenses apply, an expression consists
of keywords "AND", "OR" separating sub-expressions and surrounded by
"(", ")" .
License identifiers for licenses like [L]GPL with the 'or later' option
are constructed by using a "+" for indicating the 'or later' option.::
// SPDX-License-Identifier: GPL-2.0+
// SPDX-License-Identifier: LGPL-2.1+
WITH should be used when there is a modifier to a license needed.
For example, the linux kernel UAPI files use the expression::
// SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
// SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note
Other examples using WITH exceptions found in the linux kernel are::
// SPDX-License-Identifier: GPL-2.0 WITH mif-exception
// SPDX-License-Identifier: GPL-2.0+ WITH GCC-exception-2.0
Exceptions can only be used with particular License identifiers. The
valid License identifiers are listed in the tags of the exception text
file.
OR should be used if the file is dual licensed and only one license is
to be selected. For example, some dtsi files are available under dual
licenses::
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
Examples from U-Boot for license expressions in dual licensed files::
// SPDX-License-Identifier: GPL-2.0 OR MIT
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
AND should be used if the file has multiple licenses whose terms all
apply to use the file. For example, if code is inherited from another
project and permission has been given to put it in U-Boot, but the
original license terms need to remain in effect::
// SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) AND MIT
Another other example where both sets of license terms need to be
adhered to is::
// SPDX-License-Identifier: GPL-1.0+ AND LGPL-2.1+
[1] http://spdx.org/
[2] http://spdx.org/licenses/
Full name SPDX Identifier OSI Approved File name URI
Full name SPDX Identifier OSI Approved File name URI
=======================================================================================================================================
GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt
GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt
eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html
GNU General Public License v2.0 only GPL-2.0 Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU General Public License v2.0 or later GPL-2.0+ Y gpl-2.0.txt http://www.gnu.org/licenses/gpl-2.0.txt
GNU Library General Public License v2 or later LGPL-2.0+ Y lgpl-2.0.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.0.txt
GNU Lesser General Public License v2.1 or later LGPL-2.1+ Y lgpl-2.1.txt http://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt
eCos license version 2.0 eCos-2.0 eCos-2.0.txt http://www.gnu.org/licenses/ecos-license.html
BSD 2-Clause License BSD-2-Clause Y bsd-2-clause.txt http://spdx.org/licenses/BSD-2-Clause
BSD 3-clause "New" or "Revised" License BSD-3-Clause Y bsd-3-clause.txt http://spdx.org/licenses/BSD-3-Clause#licenseText
IBM PIBS (PowerPC Initialization and IBM-pibs ibm-pibs.txt
Boot Software) license
ISC License ISC Y isc.txt https://spdx.org/licenses/ISC
SIL OPEN FONT LICENSE (OFL-1.1) OFL-1.1 Y OFL.txt https://spdx.org/licenses/OFL-1.1.html
X11 License X11 x11.txt https://spdx.org/licenses/X11.html
Licenses/bsd-2-clause.txt 0 → 100644
View file @ 8e809399
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above
copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials
provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Licenses/bsd-3-clause.txt 0 → 100644
View file @ 8e809399
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions, and the following disclaimer,
without modification.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. The names of the above-listed copyright holders may not be used
to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Licenses/ibm-pibs.txt 0 → 100644
View file @ 8e809399
This source code has been made available to you by IBM on an AS-IS
basis. Anyone receiving this source is licensed under IBM
copyrights to use it in any way he or she deems fit, including
copying it, modifying it, compiling it, and redistributing it either
with or without modifications. No license under IBM patents or
patent applications is to be implied by the copyright license.
Any user of this software should understand that IBM cannot provide
technical support for this software and will not be responsible for
any consequences resulting from the use of this software.
Any person who transfers this source code or any derivative work
must include the IBM copyright notice, this paragraph, and the
preceding two paragraphs in the transferred software.
COPYRIGHT I B M CORPORATION 1995
LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
Licenses/isc.txt 0 → 100644
View file @ 8e809399
ISC License:
Copyright (c) 2004-2010 by Internet Systems Consortium, Inc. ("ISC")
Copyright (c) 1995-2003 by Internet Software Consortium
Permission to use, copy, modify, and/or distribute this software
for any purpose with or without fee is hereby granted,
provided that the above copyright notice and this permission notice
appear in all copies.
THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES
WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE
FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR
ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF
THIS SOFTWARE.
Licenses/r8a779x_usb3.txt 0 → 100644
View file @ 8e809399
Copyright (c) 2014, Renesas Electronics Corporation
All rights reserved.
Redistribution and use in binary form, without modification, are permitted
provided that the following conditions are met:
1. Redistribution in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
2. The name of Renesas Electronics Corporation may not be used to endorse or
promote products derived from this software without specific prior written
permission.
3. Reverse engineering, decompilation, or disassembly of this software is
not permitted.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS ELECTRONICS CORPORATION DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL RENESAS ELECTRONICS
CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Licenses/x11.txt 0 → 100644
View file @ 8e809399
X11 License
Copyright (C) 1996 X Consortium
Permission is hereby granted, free of charge, to any person obtaining a copy of
this software and associated documentation files (the "Software"), to deal in
the Software without restriction, including without limitation the rights to
use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies
of the Software, and to permit persons to whom the Software is furnished to do
so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X
CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Except as contained in this notice, the name of the X Consortium shall not be
used in advertising or otherwise to promote the sale, use or other dealings in
this Software without prior written authorization from the X Consortium.
X Window System is a trademark of X Consortium, Inc.
MAINTAINERS
View file @ 8e809399
#########################################################################
# #
# Regular Maintainers for U-Boot board support: #
# #
# For any board without permanent maintainer, please contact #
# Wolfgang Denk <wd@denx.de> #
# and Cc: the <u-boot@lists.denx.de> mailing list. #
# #
# Note: lists sorted by Maintainer Name #
# Note: These are the maintainers for specific *boards*. The #
# custodians for general architectures and subsystems can #
# be found here -- http://www.denx.de/wiki/U-Boot/Custodians #
# #
#########################################################################
#########################################################################
# PowerPC Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Poonam Aggrwal <poonam.aggrwal@freescale.com>
P2020RDB P2020
BSC9131RDB BSC9131
Naveen Burmi <NaveenBurmi@freescale.com>
BSC9132QDS BSC9132
Greg Allen <gallen@arlut.utexas.edu>
UTX8245 MPC8245
Pantelis Antoniou <panto@intracom.gr>
NETVIA MPC8xx
Reinhard Arlt <reinhard.arlt@esd-electronics.com>
cpci5200 MPC5200
mecp5123 MPC5121
mecp5200 MPC5200
pf5200 MPC5200
caddy2 MPC8349
vme8349 MPC8349
CPCI750 PPC750FX/GX
Peter Barada <peter.barada@logicpd.com>
omap3_logic ARM ARMV7 (Logic OMAP35xx/DM37xx)
Yuli Barcohen <yuli@arabellasw.com>
Adder MPC87x/MPC852T
ep8248 MPC8248
ISPAN MPC8260
MPC8260ADS MPC826x/MPC827x/MPC8280
Rattler MPC8248
ZPC1900 MPC8265
Michael Barkowski <michael.barkowski@freescale.com>
MPC8323ERDB MPC8323
Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
sacsng MPC8260
Oliver Brown <obrown@adventnetworks.com>
gw8260 MPC8260
Holger Brunck <holger.brunck@keymile.com>
kmeter1 MPC8360
kmcoge5ne MPC8360
mgcoge MPC8247
mgcoge3ne MPC8247
suvd3 MPC8321
tuge1 MPC8321
tuxx1 MPC8321
Conn Clark <clark@esteem.com>
ESTEEM192E MPC8xx
Jason Cooper <u-boot@lakedaemon.net>
dreamplug ARM926EJS (Kirkwood SoC)
Joe D'Abbraccio <ljd015@freescale.com>
MPC837xERDB MPC837x
Kári Davíðsson <kd@flaga.is>
FLAGADM MPC823
Torsten Demke <torsten.demke@fci.com>
eXalion MPC824x
Wolfgang Denk <wd@denx.de>
IceCube_5200 MPC5200
ARIA MPC5121e
FPS850L MPC850
FPS860L MPC860
ICU862 MPC862
IP860 MPC860
IVML24 MPC860
IVML24_128 MPC860
IVML24_256 MPC860
IVMS8 MPC860
IVMS8_128 MPC860
IVMS8_256 MPC860
LWMON MPC823
R360MPI MPC823
RRvision MPC823
SM850 MPC850
SPD823TS MPC823
TQM823L MPC823
TQM823L_LCD MPC823
TQM850L MPC850
TQM855L MPC855
TQM860L MPC860
TQM860L_FEC MPC860
hermes MPC860
lwmon MPC823
CU824 MPC8240
Sandpoint8240 MPC8240
ATC MPC8250
PM825 MPC8250
TQM8255 MPC8255
CPU86 MPC8260
PM826 MPC8260
TQM8260 MPC8260
P3G4 MPC7410
Phil Edworthy <phil.edworthy@renesas.com>
rsk7264 SH7264
egnite GmbH <info@egnite.de>
ethernut5 ARM926EJS (AT91SAM9XE SoC)
Dirk Eibach <eibach@gdsys.de>
controlcenterd P1022
devconcenter PPC460EX
dlvision PPC405EP
dlvision-10g PPC405EP
gdppc440etx PPC440EP/GR
intip PPC460EX
io PPC405EP
io64 PPC405EX
iocon PPC405EP
neo PPC405EP
Dave Ellis <DGE@sixnetio.com>
SXNI855T MPC8xx
Thomas Frieden <ThomasF@hyperion-entertainment.com>
AmigaOneG3SE MPC7xx
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
APC405 PPC405GP
AR405 PPC405GP
ASH405 PPC405EP
CANBT PPC405CR
CPCI2DP PPC405GP
CPCI405 PPC405GP
CPCI4052 PPC405GP
CPCI405AB PPC405GP
CPCI405DT PPC405GP
CPCIISER4 PPC405GP
DP405 PPC405EP
DU405 PPC405GP
DU440 PPC440EPx
G2000 PPC405EP
HH405 PPC405EP
HUB405 PPC405EP
OCRTC PPC405GP
ORSG PPC405GP
PCI405 PPC405GP
PLU405 PPC405EP
PMC405 PPC405GP
PMC405DE PPC405EP
PMC440 PPC440EPx
VOH405 PPC405EP
VOM405 PPC405EP
WUH405 PPC405EP
CMS700 PPC405EP
Siddarth Gore <gores@marvell.com>
guruplug ARM926EJS (Kirkwood SoC)
Paul Gortmaker <paul.gortmaker@windriver.com>
sbc8349 MPC8349
sbc8548 MPC8548
sbc8641d MPC8641D
Frank Gottschling <fgottschling@eltec.de>
MHPC MPC8xx
Wolfgang Grandegger <wg@denx.de>
ipek01 MPC5200
PN62 MPC8240
IPHASE4539 MPC8260
Anatolij Gustschin <agust@denx.de>
ac14xx MPC5121e
O2D MPC5200
O2D300 MPC5200
O2DNT2 MPC5200
O2I MPC5200
O2MNT MPC5200
O3DNT MPC5200
Rob Herring <rob.herring@calxeda.com>
highbank highbank
Klaus Heydeck <heydeck@kieback-peter.de>
KUP4K MPC855
KUP4X MPC859
Gabriel Huau <contact@huau-gabriel.fr>
mini2440 s3c2440
Gary Jennejohn <garyj@denx.de>
quad100hd PPC405EP
Murray Jensen <Murray.Jensen@csiro.au>
cogent_mpc8xx MPC8xx
cogent_mpc8260 MPC8260
hymod MPC8260
Larry Johnson <lrj@acm.org>
korat PPC440EPx
Feng Kan <fkan@amcc.com>
redwood PPC4xx
Brad Kemp <Brad.Kemp@seranoa.com>
ppmc8260 MPC8260
Sangmoon Kim <dogoil@etinsys.com>
debris MPC8245
KVME080 MPC8245
The LEOX team <team@leox.org>
ELPT860 MPC860T
Guennadi Liakhovetski <g.liakhovetski@gmx.de>
linkstation MPC8241
Dave Liu <daveliu@freescale.com>
MPC8315ERDB MPC8315
MPC832XEMDS MPC832x
MPC8360EMDS MPC8360
MPC837XEMDS MPC837x
Nye Liu <nyet@zumanetworks.com>
ZUMA MPC7xx_74xx
Kumar Gala <kumar.gala@freescale.com>
MPC8540ADS MPC8540
MPC8560ADS MPC8560
MPC8541CDS MPC8541
MPC8555CDS MPC8555
MPC8641HPCN MPC8641D
Ron Madrid <info@sheldoninst.com>
SIMPC8313 MPC8313
Dan Malek <dan@embeddedalley.com>
stxgp3 MPC85xx
stxssa MPC85xx
stxxtc MPC8xx
Ryan Mallon <ryan@bluewatersys.com>
snapper9260 ARM926EJS (AT91SAM9260 SoC)
snapper9g20 ARM926EJS (AT91SAM9G20 SoC)
Andrea "llandre" Marson <andrea.marson@dave-tech.it>
PPChameleonEVB PPC405EP
Tirumala Marri <tmarri@apm.com>
bluestone APM821XX
Reinhard Meyer <reinhard.meyer@emk-elektronik.de>
TOP860 MPC860T
TOP5200 MPC5200
TOP9000 ARM926EJS (AT91SAM9xxx SoC)
Kyle Moffett <Kyle.D.Moffett@boeing.com>
HWW1U1A P2020
Tolunay Orkun <torkun@nextio.com>
csb272 PPC405GP
csb472 PPC405GP
John Otken <jotken@softadvances.com>
luan PPC440SP
taihu PPC405EP
Keith Outwater <Keith_Outwater@mvis.com>
GEN860T MPC860T
GEN860T_SC MPC860T
Frank Panno <fpanno@delphintech.com>
ep8260 MPC8260
Chan-Taek Park <c-park@ti.com>
tnetv107x_evm tnetv107x
Denis Peter <d.peter@mpl.ch>
MIP405 PPC4xx
PIP405 PPC4xx
Werner Pfister <Pfister_Werner@intercontrol.de>
digsy_mtc mpc5200
digsy_mtc_rev5 mpc5200
Kim Phillips <kim.phillips@freescale.com>
MPC8349EMDS MPC8349
Sergei Poselenov <sposelenov@emcraft.com>
a4m072 MPC5200
Sudhakar Rajashekhara <sudhakar.raj@ti.com>
da850evm ARM926EJS (DA850/OMAP-L138)
Ricardo Ribalda <ricardo.ribalda@uam.es>
ml507 PPC440x5
v5fx30teval PPC440x5
xilinx-ppc405-generic PPC405
xilinx-ppc440-generic PPC440x5
Stefan Roese <sr@denx.de>
a3m071 MPC5200
a4m2k MPC5200
P3M7448 MPC7448
uc100 MPC857
acadia PPC405EZ
alpr PPC440GX
bamboo PPC440EP
bunbinga PPC405EP
canyonlands PPC460EX
ebony PPC440GP
glacier PPC460GT
haleakala PPC405EXr
icon PPC440SPe
katmai PPC440SPe
kilauea PPC405EX
lwmon5 PPC440EPx
makalu PPC405EX
ocotea PPC440GX
p3p440 PPC440GP
pcs440ep PPC440EP
rainier PPC440GRx
sequoia PPC440EPx
sycamore PPC405GPr
t3corp PPC460GT
taishan PPC440GX
walnut PPC405GP
yellowstone PPC440GR
yosemite PPC440EP
zeus PPC405EP
P3M750 PPC750FX/GX/GL
Yusdi Santoso <yusdi_santoso@adaptec.com>
HIDDEN_DRAGON MPC8241/MPC8245
Travis Sawyer (travis.sawyer@sandburst.com>
KAREF PPC440GX
METROBOX PPC440GX
Georg Schardt <schardt@team-ctech.de>
fx12mm PPC405
Heiko Schocher <hs@denx.de>
cam_enc_4xx davinci/ARM926EJS
charon MPC5200
ids8247 MPC8247
jupiter MPC5200
kmsupx5 MPC8321
mucmc52 MPC5200
muas3001 MPC8270
municse MPC5200
sc3 PPC405GP
uc101 MPC5200
ve8313 MPC8313
Andre Schwarz <andre.schwarz@matrix-vision.de>
mergerbox MPC8377
mvbc_p MPC5200
mvblm7 MPC8343
mvsmr MPC5200
Jon Smirl <jonsmirl@gmail.com>
pcm030 MPC5200
Ira W. Snyder <iws@ovro.caltech.edu>
P2020COME P2020
York Sun <yorksun@freescale.com>
T4240EMU T4240
Timur Tabi <timur@freescale.com>
MPC8349E-mITX MPC8349
MPC8349E-mITX-GP MPC8349
P1022DS P1022
Erik Theisen <etheisen@mindspring.com>
W7OLMC PPC4xx
W7OLMG PPC4xx
Jim Thompson <jim@musenki.com>
MUSENKI MPC8245/8241
Sandpoint8245 MPC8245
Rune Torgersen <runet@innovsys.com>
MPC8266ADS MPC8266
Peter Tyser <ptyser@xes-inc.com>
xpedite1000 PPC440GX
xpedite5170 MPC8640
xpedite5200 MPC8548
xpedite5370 MPC8572
xpedite5500 P2020
David Updegraff <dave@cray.com>
CRAYL1 PPC4xx
Anton Vorontsov <avorontsov@ru.mvista.com>
MPC8360ERDK MPC8360
Josef Wagner <Wagner@Microsys.de>
CPC45 MPC8245
PM520 MPC5200
Michael Weiss <michael.weiss@ifm.com>
PDM360NG MPC5121e
Stephen Williams <steve@icarus.com>
JSE PPC405GPr
Ilya Yanok <yanok@emcraft.com>
mpc8308_p1m MPC8308
MPC8308RDB MPC8308
Roy Zang <tie-fei.zang@freescale.com>
mpc7448hpc2 MPC7448
P1023RDS P1023
John Zhan <zhanz@sinovee.com>
svm_sc8xx MPC8xx
Detlev Zundel <dzu@denx.de>
inka4x0 MPC5200
-------------------------------------------------------------------------
Unknown / orphaned boards:
ADS860 MPC8xx
FADS823 MPC8xx
FADS850SAR MPC8xx
FADS860T MPC8xx
GENIETV MPC8xx
MBX MPC8xx
MBX860T MPC8xx
NX823 MPC8xx
RPXClassic MPC8xx
RPXlite MPC8xx
MOUSSE MPC824x
RPXsuper MPC8260
rsdproto MPC8260
EVB64260 MPC7xx_74xx
EVB64260_750CX MPC750CX [Eran Man <eran@nbase.co.il>]
versatile ARM926EJ-S
#########################################################################
# ARM Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
Raphael Assenat <raph@8d.com>
eco5pk ARM ARMV7 (AM35x SoC)
Stefano Babic <sbabic@denx.de>
ea20 davinci
flea3 i.MX35
mt_ventoux omap3
mx35pdk i.MX35
mx51evk i.MX51
polaris xscale/pxa
trizepsiv xscale/pxa
twister omap3
vision2 i.MX51
woodburn i.MX35
Lukasz Dalek <luk0104@gmail.com>
h2200 xscale/pxa
Jason Liu <r64343@freescale.com>
mx53evk i.MX53
mx53loco i.MX53
mx6qarm2 i.MX6Q
mx6qsabrelite i.MX6Q
Enric Balletbo i Serra <eballetbo@iseebcn.com>
igep0020 ARM ARMV7 (OMAP3xx SoC)
igep0030 ARM ARMV7 (OMAP3xx SoC)
igep0032 ARM ARMV7 (OMAP3xx SoC)
igep0033 ARM ARMV7 (AM33xx Soc)
Eric Benard <eric@eukrea.com>
cpuat91 ARM920T
cpu9260 ARM926EJS (AT91SAM9260 SoC)
cpu9G20 ARM926EJS (AT91SAM9G20 SoC)
Ajay Bhargav <ajay.bhargav@einfochips.com>
gplugd ARM926EJS (ARMADA100 88AP168 SoC)
Rishi Bhattacharya <rishi@ti.com>
omap5912osk ARM926EJS
Andreas Bießmann <andreas.devel@gmail.com>
at91rm9200ek at91rm9200
Cliff Brake <cliff.brake@gmail.com>
pxa255_idp xscale/pxa
Rick Bronson <rick@efn.org>
AT91RM9200DK at91rm9200
Luca Ceresoli <luca.ceresoli@comelit.it>
dig297 ARM ARMV7 (OMAP3530 SoC)
Po-Yu Chuang <ratbert@faraday-tech.com>
a320evb FA526 (ARM920T-like) (a320 SoC)
Eric Cooper <ecc@cmu.edu>
dockstar ARM926EJS (Kirkwood SoC)
Wolfgang Denk <wd@denx.de>
imx27lite i.MX27
qong i.MX31
Mike Dunn <mikedunn@newsguy.com>
palmtreo680 pxa270
Kristoffer Ericson <kristoffer.ericson@gmail.com>
jornada SA1110
Fabio Estevam <fabio.estevam@freescale.com>
mx25pdk i.MX25
mx28evk i.MX28
mx31pdk i.MX31
mx53ard i.MX53
mx53smd i.MX53
mx6sabresd i.MX6Q/DL
mx6qsabreauto i.MX6Q
wandboard i.MX6DL/S/Q
mx6slevk i.MX6SL
Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
meesc ARM926EJS (AT91SAM9263 SoC)
otc570 ARM926EJS (AT91SAM9263 SoC)
Bo Shen<voice.shen@atmel.com>
at91sam9g10ek ARM926EJS (AT91SAM9G10 SoC)
at91sam9m10g45ek ARM926EJS (AT91SAM9G45 SoC)
Simon Guinot <simon.guinot@sequanux.org>
inetspace_v2 ARM926EJS (Kirkwood SoC)
netspace_v2 ARM926EJS (Kirkwood SoC)
netspace_max_v2 ARM926EJS (Kirkwood SoC)
net2big_v2 ARM926EJS (Kirkwood SoC)
Igor Grinberg <grinberg@compulab.co.il>
cm_t35 ARM ARMV7 (OMAP3xx Soc)
Stefan Herbrechtsmeier <stefan@code.herbrechtsmeier.net>
dns325 ARM926EJS (Kirkwood SoC)
Lauri Hintsala <lauri.hintsala@bluegiga.com>
apx4devkit i.MX28
Vaibhav Hiremath <hvaibhav@ti.com>
am3517_evm ARM ARMV7 (AM35x SoC)
Markus Hubig <mhubig@imko.de>
STAMP9G20 ARM926EJS
Grazvydas Ignotas <notasas@gmail.com>
omap3_pandora ARM ARMV7 (OMAP3xx SoC)
Ilko Iliev <iliev@ronetix.at>
PM9261 AT91SAM9261
PM9263 AT91SAM9263
PM9G45 ARM926EJS (AT91SAM9G45 SoC)
Michael Jones <michael.jones@matrix-vision.de>
omap3_mvblx ARM ARMV7 (OMAP3xx SoC)
Matthias Kaehlcke <matthias@kaehlcke.net>
edb9301 ARM920T (EP9301)
edb9302 ARM920T (EP9302)
edb9302a ARM920T (EP9302)
edb9307 ARM920T (EP9307)
edb9307a ARM920T (EP9307)
edb9312 ARM920T (EP9312)
edb9315 ARM920T (EP9315)
edb9315a ARM920T (EP9315)
Nishant Kamat <nskamat@ti.com>
omap1610h2 ARM926EJS
Minkyu Kang <mk7.kang@samsung.com>
SMDKC100 ARM ARMV7 (S5PC100 SoC)
s5p_goni ARM ARMV7 (S5PC110 SoC)
s5pc210_universal ARM ARMV7 (EXYNOS4210 SoC)
Chander Kashyap <k.chander@samsung.com>
origen ARM ARMV7 (EXYNOS4210 SoC)
SMDKV310 ARM ARMV7 (EXYNOS4210 SoC)
SMDK5250 ARM ARMV7 (EXYNOS5250 SoC)
Lukasz Majewski <l.majewski@samsung.com>
trats ARM ARMV7 (EXYNOS4210 SoC)
Torsten Koschorrek <koschorrek@synertronixx.de>
scb9328 ARM920T (i.MXL)
Sergey Kubushyn <ksi@koi8.net>
DV-EVM ARM926EJS
SONATA ARM926EJS
SCHMOOGIE ARM926EJS
Vipin Kumar <vipin.kumar@st.com>
spear300 ARM926EJS (spear300 Soc)
spear310 ARM926EJS (spear310 Soc)
spear320 ARM926EJS (spear320 Soc)
spear600 ARM926EJS (spear600 Soc)
Sergey Lapin <slapin@ossfans.org>
afeb9260 ARM926EJS (AT91SAM9260 SoC)
Valentin Longchamp <valentin.longchamp@keymile.com>
km_kirkwood ARM926EJS (Kirkwood SoC)
kmnusa ARM926EJS (Kirkwood SoC)
mgcoge3un ARM926EJS (Kirkwood SoC)
kmcoge5un ARM926EJS (Kirkwood SoC)
portl2 ARM926EJS (Kirkwood SoC)
Nishanth Menon <nm@ti.com>
omap3_sdp3430 ARM ARMV7 (OMAP3xx SoC)
omap3_zoom1 ARM ARMV7 (OMAP3xx SoC)
David Müller <d.mueller@elsoft.ch>
smdk2410 ARM920T
VCMA9 ARM920T
Eric Millbrandt <emillbrandt@dekaresearch.com>
galaxy5200 mpc5200
Nagendra T S <nagendra@mistralsolutions.com>
am3517_crane ARM ARMV7 (AM35x SoC)
Dinh Nguyen <dinguyen@altera.com>
Chin Liang See <clsee@altera.com>
socfpga socfpga_cyclone5
Sandeep Paulraj <s-paulraj@ti.com>
davinci_dm355evm ARM926EJS
davinci_dm355leopard ARM926EJS
davinci_dm365evm ARM926EJS
davinci_dm6467evm ARM926EJS
Helmut Raiger <helmut.raiger@hale.at>
tt01 i.MX31
Linus Walleij <linus.walleij@linaro.org>
integratorap various
integratorcp various
Luka Perkov <luka@openwrt.org>
ib62x0 ARM926EJS
iconnect ARM926EJS
Dave Peverley <dpeverley@mpc-data.co.uk>
omap730p2 ARM926EJS
Lars Poeschel <poeschel@lemonage.de>
pcm051 ARM ARMV7 (AM33xx Soc)
Mathieu Poirier <mathieu.poirier@linaro.org>
snowball ARM ARMV7 (u8500 SoC)
Stelian Pop <stelian@popies.net>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
Matt Porter <mporter@ti.com>
ti814x_evm ARM ARMV7 (TI814x Soc)
Dave Purdy <david.c.purdy@gmail.com>
pogo_e02 ARM926EJS (Kirkwood SoC)
Sricharan R <r.sricharan@ti.com>
omap4_panda ARM ARMV7 (OMAP4xx SoC)
omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
omap5_evm ARM ARMV7 (OMAP5xx Soc)
Suriyan Ramasami <suriyan.r@gmail.com>
goflexhome ARM926EJS (Kirkwood SoC)
Thierry Reding <thierry.reding@avionic-design.de>
plutux Tegra20 (ARM7 & A9 Dual Core)
medcom-wide Tegra20 (ARM7 & A9 Dual Core)
tec Tegra20 (ARM7 & A9 Dual Core)
Christian Riesch <christian.riesch@omicron.at>
Manfred Rudigier <manfred.rudigier@omicron.at>
calimain ARM926EJS (AM1808 SoC)
Tom Rini <trini@ti.com>
am335x_evm ARM ARMV7 (AM33xx Soc)
omap3_beagle ARM ARMV7 (OMAP3xx SoC)
omap3_evm ARM ARMV7 (OMAP3xx SoC)
Tom Rix <Tom.Rix@windriver.com>
omap3_zoom2 ARM ARMV7 (OMAP3xx SoC)
John Rigby <jcrigby@gmail.com>
tx25 i.MX25
Stefan Roese <sr@denx.de>
x600 ARM926EJS (spear600 Soc)
titanium i.MX6Q
pdnb3 xscale/ixp
scpu xscale/ixp
Alessandro Rubini <rubini@unipv.it>
Nomadik Linux Team <STN_WMM_nomadik_linux@list.st.com>
nhk8815 ARM926EJS (Nomadik 8815 Soc)
Steve Sakoman <sakoman@gmail.com>
omap3_overo ARM ARMV7 (OMAP3xx SoC)
Leo Sartre <lsartre@adeneo-embedded.com>
cgtqmx6qeval i.MX6Q
Jens Scharsig <esw@bus-elektronik.de>
eb_cpux9k2 ARM920T (AT91RM9200 SoC)
vl_ma2sc ARM926EJS (AT91SAM9263 SoC)
Heiko Schocher <hs@denx.de>
enbw_cmc ARM926EJS (AM1808 SoC)
magnesium i.MX27
Michael Schwingen <michael@schwingen.org>
actux1 xscale/ixp
actux2 xscale/ixp
actux3 xscale/ixp
actux4 xscale/ixp
dvlhost xscale/ixp
Matt Sealey <matt@genesi-usa.com>
efikamx i.MX51
efikasb i.MX51
Bo Shen <voice.shen@atmel.com>
at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
sama5d3xek ARMV7 (SAMA5D31, D33, D34, D35 SoC)
Rajeshwari Shinde <rajeshwari.s@samsung.com>
snow ARM ARMV7 (EXYNOS5250 SoC)
Michal Simek <monstr@monstr.eu>
zynq ARM ARMV7 (Zynq SoC)
Lucas Stach <dev@lynxeye.de>
colibri_t20_iris Tegra20 (ARM7 & A9 Dual Core)
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
Albin Tonnerre <albin.tonnerre@free-electrons.com>
sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC)
tny_a9260 ARM926EJS (AT91SAM9260 SoC)
tny_a9g20 ARM926EJS (AT91SAM9G20 SoC)
Greg Ungerer <greg.ungerer@opengear.com>
cm4008 ks8695p
cm4116 ks8695p
cm4148 ks8695p
Marek Vasut <marek.vasut@gmail.com>
balloon3 xscale/pxa
colibri_pxa270 xscale/pxa
palmld xscale/pxa
palmtc xscale/pxa
vpac270 xscale/pxa
zipitz2 xscale/pxa
mx23_olinuxino i.MX23
m28evk i.MX28
sc_sps_1 i.MX28
m53evk i.MX53
Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
SFFSDR ARM926EJS
Lokesh Vutla <lokeshvutla@ti.com>
dra7xx_evm ARM ARMV7 (DRA7xx Soc)
Matt Waddel <matt.waddel@linaro.org>
vexpress_ca9x4 ARM ARMV7 (Quad Core)
vexpress_ca5x2 ARM ARMV7 (Dual Core)
Otavio Salvador <otavio@ossystems.com.br>
mx23evk i.MX23
Prafulla Wadaskar <prafulla@marvell.com>
aspenite ARM926EJS (ARMADA100 88AP168 SoC)
mv88f6281gtw_ge ARM926EJS (Kirkwood SoC)
openrd_base ARM926EJS (Kirkwood SoC)
rd6281a ARM926EJS (Kirkwood SoC)
sheevaplug ARM926EJS (Kirkwood SoC)
Michael Walle <michael@walle.cc>
lschlv2 ARM926EJS (Kirkwood SoC)
lsxhl ARM926EJS (Kirkwood SoC)
Tom Warren <twarren@nvidia.com>
harmony Tegra20 (ARM7 & A9 Dual Core)
seaboard Tegra20 (ARM7 & A9 Dual Core)
cardhu Tegra30 (ARM7 & A9 Quad Core)
dalmore Tegra114 (ARM7 & A15 Quad Core)
Tom Warren <twarren@nvidia.com>
Stephen Warren <swarren@nvidia.com>
ventana Tegra20 (ARM7 & A9 Dual Core)
paz00 Tegra20 (ARM7 & A9 Dual Core)
trimslice Tegra20 (ARM7 & A9 Dual Core)
whistler Tegra20 (ARM7 & A9 Dual Core)
beaver Tegra30 (ARM7 & A9 Quad Core)
Stephen Warren <swarren@wwwdotorg.org>
rpi_b BCM2835 (ARM1176)
Thomas Weber <weber@corscience.de>
devkit8000 ARM ARMV7 (OMAP3530 SoC)
tricorder ARM ARMV7 (OMAP3503 SoC)
Lei Wen <leiwen@marvell.com>
dkb ARM926EJS (PANTHEON 88AP920 SOC)
Matthias Weisser <weisserm@arcor.de>
jadecpu ARM926EJS (MB86R01 SoC)
zmx25 ARM926EJS (imx25 SoC)
Josh Wu <josh.wu@atmel.com>
at91sam9n12ek ARM926EJS (AT91SAM9N12 SoC)
Ilya Yanok <yanok@emcraft.com>
mcx ARM ARMV7 (AM35x SoC)
Syed Mohammed Khasim <sm.khasim@gmail.com>
Sughosh Ganu <urwithsughosh@gmail.com>
hawkboard ARM926EJS (OMAP-L138)
Vladimir Zapolskiy <vz@mleia.com>
devkit3250 lpc32xx
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Tetsuyuki Kobayashi <koba@kmckk.co.jp>
kzm9g SH73A0 (RMOBILE SoC)
Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
armadillo-800eva R8A7740 (RMOBILE SoC)
Pali Rohár <pali.rohar@gmail.com>
nokia_rx51 ARM ARMV7 (OMAP34xx SoC)
Eric Nelson <eric.nelson@boundarydevices.com>
nitrogen6dl i.MX6DL 1GB
nitrogen6dl2g i.MX6DL 2GB
nitrogen6q i.MX6Q/6D 1GB
nitrogen6q2g i.MX6Q/6D 2GB
nitrogen6s i.MX6S 512MB
nitrogen6s1g i.MX6S 1GB
Alison Wang <b18965@freescale.com>
vf610twr VF610
Sergey Yanovich <ynvich@gmail.com>
lp8x4x xscale/pxa
-------------------------------------------------------------------------
Unknown / orphaned boards:
Board CPU Last known maintainer / Comment
.........................................................................
omap1510inn ARM925T Kshitij Gupta <kshitij@ti.com>
lubbock xscale/pxa Kyle Harris <kharris@nexus-tech.net> / dead address
imx31_phycore_eet i.MX31 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
mx31ads i.MX31 Guennadi Liakhovetski <g.liakhovetski@gmx.de> / resigned
#########################################################################
# x86 Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Simon Glass <sjg@chromium.org>
chromebook-x86 Coreboot runs first, then U-Boot
Supports Intel Sandy Bridge / Ivy Bridge so far
Chromebooks for x86, including:
Samsung Series 5 Chromebook
Acer AC700 Chromebook
Acer C7 Chromebook
Samsung Chromebook 550
HP Pavillion Chromebook
Acer C710 Chromebook
Chromebook Pixel
#########################################################################
# MIPS Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Wolfgang Denk <wd@denx.de>
incaip MIPS32 4Kc
Vlad Lungu <vlad.lungu@windriver.com>
qemu_mips MIPS32
Stefan Roese <sr@denx.de>
vct_xxx MIPS32 4Kc
-------------------------------------------------------------------------
Unknown / orphaned boards:
Board CPU Last known maintainer / Comment
.........................................................................
dbau1x00 MIPS32 Au1000 Thomas Lange <thomas@corelatus.se>
#########################################################################
# Nios-II Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Scott McNutt <smcnutt@psyent.com>
PCI5441 Nios-II
PK1C20 Nios-II
nios2-generic Nios-II
#########################################################################
# MicroBlaze Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Michal Simek <monstr@monstr.eu>
microblaze-generic MicroBlaze
#########################################################################
# Coldfire Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Hayden Fraser <Hayden.Fraser@freescale.com>
M5253EVBE mcf52x2
Matthias Fuchs <matthias.fuchs@esd-electronics.com>
TASREG MCF5249
Jens Scharsig <esw@bus-elektronik.de>
eb_cpu5282 mfc5282
TsiChung Liew <Tsi-Chung.Liew@freescale.com>
M52277EVB mcf5227x
M5235EVB mcf52x2
M5253DEMO mcf52x2
M53017EVB mcf532x
M5329EVB mcf532x
M5373EVB mcf532x
M54455EVB mcf5445x
M5475EVB mcf547x_8x
M5485EVB mcf547x_8x
Wolfgang Wegner <w.wegner@astro-kom.de>
astro_mcf5373l MCF5373L
#########################################################################
# AVR32 Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Andreas Bießmann <andreas.devel@googlemail.com>
grasshopper AT32AP7000
atngw100mkii AT32AP7000
Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
FAVR-32-EZKIT AT32AP7000
Mark Jackson <mpfj@mimc.co.uk>
MIMC200 AT32AP7000
Alex Raimondi <alex.raimondi@miromico.ch>
Julien May <julien.may@miromico.ch>
HAMMERHEAD AT32AP7000
Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
ATSTK1000 AT32AP7xxx
ATSTK1002 AT32AP7000
ATSTK1003 AT32AP7001
ATSTK1004 AT32AP7002
ATSTK1006 AT32AP7000
ATNGW100 AT32AP7000
#########################################################################
# SuperH Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Yusuke Goda <goda.yusuke@renesas.com>
MIGO-R SH7722
Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
<iwamatsu.nobuhiro@renesas.com>
MS7750SE SH7750
MS7722SE SH7722
R7780MP SH7780
R2DPlus SH7751R
SH7763RDP SH7763
RSK7203 SH7203
AP325RXA SH7723
SHMIN SH7706
ECOVEC SH7724
R0P7734 SH7734
AP_SH4A_4A SH7734
Mark Jonas <mark.jonas@de.bosch.com>
mpr2 SH7720
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
MS7720SE SH7720
R0P77520000RZ SH7752
R0P77570030RL SH7757
R0P77850011RL SH7785
#########################################################################
# Blackfin Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Sonic Zhang <sonic.adi@gmail.com>
Blackfin Team <u-boot-devel@blackfin.uclinux.org>
BF506F-EZKIT BF506
BF518F-EZBRD BF518
BF526-EZBRD BF526
BF527-AD7160-EVAL BF527
BF527-EZKIT BF527
BF527-EZKIT-V2 BF527
BF527-SDP BF527
BF533-EZKIT BF533
BF533-STAMP BF533
BF537-PNAV BF537
BF537-STAMP BF537
BF538F-EZKIT BF538
BF548-EZKIT BF548
BF561-EZKIT BF561
BF609-EZKIT BF609
M.Hasewinkel (MHA) <info@ssv-embedded.de>
dnp5370 BF537
Brent Kandetzki <brentk@teleco.com>
IP04 BF532
Peter Meerwald <devel@bct-electronic.com>
bct-brettl2 BF536
I-SYST Micromodule <support@i-syst.com>
IBF-DSP561 BF561
Wojtek Skulski <skulski@pas.rochester.edu>
Wojtek Skulski <info@skutek.com>
Benjamin Matthews <mben12@gmail.com>
BlackStamp BF533
BlackVME BF561
Martin Strubel <strubel@section5.ch>
BF537-minotaur BF537
BF537-srv1 BF537
Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org>
CM-BF527 BF527
CM-BF533 BF533
CM-BF537E BF537
CM-BF537U BF537
CM-BF548 BF548
CM-BF561 BF561
TCM-BF518 BF518
TCM-BF537 BF537
Valentin Yakovenkov <yakovenkov@niistt.ru>
Anton Shurpin <shurpin.aa@niistt.ru>
BF561-ACVILON BF561
Haitao Zhang <hzhang@ucrobotics.com>
Chong Huang <chuang@ucrobotics.com>
bf525-ucr2 BF525
Dimitar Penev <dpn@switchfin.org>
BR4 Appliance BF537
PR1 Appliance BF537
#########################################################################
# NDS32 Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Macpaul Lin <macpaul@andestech.com>
ADP-AG101 N1213 (AG101 SoC)
ADP-AG101P N1213 (AG101P XC5 FPGA)
ADP-AG102 N1213f (AG102 SoC with FPU)
#########################################################################
# OpenRISC Systems: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
openrisc-generic OpenRISC
#########################################################################
# Sandbox: #
# #
# Maintainer Name, Email Address #
# Board CPU #
#########################################################################
Simon Glass <sjg@chromium.org>
sandbox sandbox
#########################################################################
# End of MAINTAINERS list #
#########################################################################
Descriptions of section entries:
P: Person (obsolete)
M: Mail patches to: FullName <address@domain>
L: Mailing list that is relevant to this area
W: Web-page with status/info
Q: Patchwork web based patch tracking system site
T: SCM tree type and location.
Type is one of: git, hg, quilt, stgit, topgit
S: Status, one of the following:
Supported: Someone is actually paid to look after this.
Maintained: Someone actually looks after it.
Odd Fixes: It has a maintainer but they don't have time to do
much other than throw the odd patch in. See below..
Orphan: No current maintainer [but maybe you could take the
role as you write your new code].
Obsolete: Old code. Something tagged obsolete generally means
it has been replaced by a better system and you
should be using that.
F: Files and directories with wildcard patterns.
A trailing slash includes all files and subdirectory files.
F: drivers/net/ all files in and below drivers/net
F: drivers/net/* all files in drivers/net, but not below
F: */net/* all files in "any top level directory"/net
One pattern per line. Multiple F: lines acceptable.
N: Files and directories with regex patterns.
N: [^a-z]tegra all files whose path contains the word tegra
One pattern per line. Multiple N: lines acceptable.
scripts/get_maintainer.pl has different behavior for files that
match F: pattern and matches of N: patterns. By default,
get_maintainer will not look at git log history when an F: pattern
match occurs. When an N: match occurs, git log history is used
to also notify the people that have git commit signatures.
X: Files and directories that are NOT maintained, same rules as F:
Files exclusions are tested before file matches.
Can be useful for excluding a specific subdirectory, for instance:
F: net/
X: net/ipv6/
matches all files in and below net excluding net/ipv6/
K: Keyword perl extended regex pattern to match content in a
patch or file. For instance:
K: of_get_profile
matches patches or files that contain "of_get_profile"
K: \b(printk|pr_(info|err))\b
matches patches or files that contain one or more of the words
printk, pr_info or pr_err
One regex pattern per line. Multiple K: lines acceptable.
Note: For the hard of thinking, this list is meant to remain in alphabetical
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
Maintainers List (try to look for most precise areas first)
-----------------------------------
ARC
M: Alexey Brodkin <alexey.brodkin@synopsys.com>
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
T: git git://git.denx.de/u-boot-arc.git
F: arch/arc/
F: board/synopsys/
ARC HSDK CGU CLOCK
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
F: drivers/clk/clk-hsdk-cgu.c
F: include/dt-bindings/clock/snps,hsdk-cgu.h
F: doc/device-tree-bindings/clock/snps,hsdk-cgu.txt
ARC HSDK CREG GPIO
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Maintained
L: uboot-snps-arc@synopsys.com
F: drivers/gpio/hsdk-creg-gpio.c
ARM
M: Albert Aribaud <albert.u.boot@aribaud.net>
S: Maintained
T: git git://git.denx.de/u-boot-arm.git
F: arch/arm/
ARM ALTERA SOCFPGA
M: Marek Vasut <marex@denx.de>
S: Maintainted
T: git git://git.denx.de/u-boot-socfpga.git
F: arch/arm/mach-socfpga/
ARM ATMEL AT91
M: Andreas Bießmann <andreas@biessmann.org>
S: Maintained
T: git git://git.denx.de/u-boot-atmel.git
F: arch/arm/mach-at91/
ARM BROADCOM BCM283X
M: Alexander Graf <agraf@suse.de>
S: Maintained
F: arch/arm/mach-bcm283x/
F: drivers/gpio/bcm2835_gpio.c
F: drivers/mmc/bcm2835_sdhci.c
F: drivers/mmc/bcm2835_sdhost.c
F: drivers/serial/serial_bcm283x_mu.c
F: drivers/serial/serial_bcm283x_pl011.c
F: drivers/video/bcm2835.c
F: include/dm/platform_data/serial_bcm283x_mu.h
F: drivers/pinctrl/broadcom/
ARM FREESCALE IMX
M: Stefano Babic <sbabic@denx.de>
M: Fabio Estevam <fabio.estevam@nxp.com>
S: Maintained
T: git git://git.denx.de/u-boot-imx.git
F: arch/arm/cpu/arm1136/mx*/
F: arch/arm/cpu/arm926ejs/mx*/
F: arch/arm/cpu/armv7/vf610/
F: arch/arm/mach-imx/
F: arch/arm/include/asm/arch-imx/
F: arch/arm/include/asm/arch-mx*/
F: arch/arm/include/asm/arch-vf610/
F: arch/arm/include/asm/mach-imx/
F: board/freescale/*mx*/
ARM HISILICON
M: Peter Griffin <peter.griffin@linaro.org>
S: Maintained
F: arch/arm/cpu/armv8/hisilicon
F: arch/arm/include/asm/arch-hi6220/
ARM MARVELL KIRKWOOD ARMADA-XP ARMADA-38X
M: Prafulla Wadaskar <prafulla@marvell.com>
M: Luka Perkov <luka.perkov@sartura.hr>
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-marvell.git
F: arch/arm/mach-kirkwood/
F: arch/arm/mach-mvebu/
F: drivers/ata/ahci_mvebu.c
ARM MARVELL PXA
M: Marek Vasut <marex@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-pxa.git
F: arch/arm/cpu/pxa/
F: arch/arm/include/asm/arch-pxa/
ARM RENESAS RMOBILE/R-CAR
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
M: Marek Vasut <marek.vasut+renesas@gmail.com>
S: Maintained
T: git git://git.denx.de/u-boot-sh.git
F: arch/arm/mach-rmobile/
ARM ROCKCHIP
M: Simon Glass <sjg@chromium.org>
M: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
S: Maintained
T: git git://git.denx.de/u-boot-rockchip.git
F: arch/arm/include/asm/arch-rockchip/
F: arch/arm/mach-rockchip/
F: board/rockchip/
F: drivers/clk/rockchip/
F: drivers/gpio/rk_gpio.c
F: drivers/misc/rockchip-efuse.c
F: drivers/mmc/rockchip_sdhci.c
F: drivers/mmc/rockchip_dw_mmc.c
F: drivers/pinctrl/rockchip/
F: drivers/ram/rockchip/
F: drivers/sysreset/sysreset_rockchip.c
F: drivers/video/rockchip/
F: tools/rkcommon.c
F: tools/rkcommon.h
F: tools/rkimage.c
F: tools/rksd.c
F: tools/rkspi.c
ARM SAMSUNG
M: Minkyu Kang <mk7.kang@samsung.com>
S: Maintained
T: git git://git.denx.de/u-boot-samsung.git
F: arch/arm/mach-exynos/
F: arch/arm/mach-s5pc1xx/
F: arch/arm/cpu/armv7/s5p-common/
ARM SNAPDRAGON
M: Ramon Fried <ramon.fried@gmail.com>
S: Maintained
F: arch/arm/mach-snapdragon/
ARM STI
M: Patrice Chotard <patrice.chotard@st.com>
S: Maintained
F: arch/arm/mach-sti/
F: arch/arm/include/asm/arch-sti*/
ARM STM SPEAR
#M: Vipin Kumar <vipin.kumar@st.com>
S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-stm.git
F: arch/arm/cpu/arm926ejs/spear/
F: arch/arm/include/asm/arch-spear/
ARM STM STM32MP
M: Patrick Delaunay <patrick.delaunay@st.com>
S: Maintained
F: arch/arm/mach-stm32mp
F: drivers/clk/clk_stm32mp1.c
F: drivers/misc/stm32mp_fuse.c
F: drivers/ram/stm32mp1/
ARM STM STV0991
M: Vikas Manocha <vikas.manocha@st.com>
S: Maintained
F: arch/arm/cpu/armv7/stv0991/
F: arch/arm/include/asm/arch-stv0991/
ARM SUNXI
M: Jagan Teki <jagan@openedev.com>
M: Maxime Ripard <maxime.ripard@bootlin.com>
S: Maintained
T: git git://git.denx.de/u-boot-sunxi.git
F: arch/arm/cpu/armv7/sunxi/
F: arch/arm/include/asm/arch-sunxi/
F: arch/arm/mach-sunxi/
F: board/sunxi/
ARM TEGRA
M: Tom Warren <twarren@nvidia.com>
S: Maintained
T: git git://git.denx.de/u-boot-tegra.git
F: arch/arm/mach-tegra/
F: arch/arm/include/asm/arch-tegra*/
ARM TI
M: Tom Rini <trini@konsulko.com>
S: Maintained
T: git git://git.denx.de/u-boot-ti.git
F: arch/arm/mach-davinci/
F: arch/arm/mach-keystone/
F: arch/arm/include/asm/arch-omap*/
F: arch/arm/include/asm/ti-common/
ARM UNIPHIER
M: Masahiro Yamada <yamada.masahiro@socionext.com>
S: Maintained
T: git git://git.denx.de/u-boot-uniphier.git
F: arch/arm/mach-uniphier/
F: configs/uniphier_*_defconfig
N: uniphier
ARM ZYNQ
M: Michal Simek <monstr@monstr.eu>
S: Maintained
T: git git://git.denx.de/u-boot-microblaze.git
F: arch/arm/mach-zynq/
F: drivers/clk/clk_zynq.c
F: drivers/fpga/zynqpl.c
F: drivers/gpio/zynq_gpio.c
F: drivers/i2c/i2c-cdns.c
F: drivers/i2c/muxes/pca954x.c
F: drivers/i2c/zynq_i2c.c
F: drivers/mmc/zynq_sdhci.c
F: drivers/mtd/nand/zynq_nand.c
F: drivers/net/phy/xilinx_phy.c
F: drivers/net/zynq_gem.c
F: drivers/serial/serial_zynq.c
F: drivers/spi/zynq_qspi.c
F: drivers/spi/zynq_spi.c
F: drivers/usb/host/ehci-zynq.c
F: drivers/watchdog/cdns_wdt.c
F: include/zynqpl.h
F: tools/zynqimage.c
N: zynq
ARM ZYNQMP
M: Michal Simek <michal.simek@xilinx.com>
S: Maintained
T: git git://git.denx.de/u-boot-microblaze.git
F: arch/arm/cpu/armv8/zynqmp/
F: drivers/clk/clk_zynqmp.c
F: drivers/fpga/zynqpl.c
F: drivers/gpio/zynq_gpio.c
F: drivers/i2c/i2c-cdns.c
F: drivers/i2c/muxes/pca954x.c
F: drivers/i2c/zynq_i2c.c
F: drivers/mmc/zynq_sdhci.c
F: drivers/mtd/nand/zynq_nand.c
F: drivers/net/phy/xilinx_phy.c
F: drivers/net/zynq_gem.c
F: drivers/serial/serial_zynq.c
F: drivers/spi/zynq_qspi.c
F: drivers/spi/zynq_spi.c
F: drivers/timer/cadence-ttc.c
F: drivers/usb/host/ehci-zynq.c
F: drivers/watchdog/cdns_wdt.c
F: include/zynqmppl.h
F: tools/zynqmp*
N: zynqmp
ARM ZYNQMP R5
M: Michal Simek <michal.simek@xilinx.com>
S: Maintained
T: git git://git.denx.de/u-boot-microblaze.git
F: arch/arm/mach-zynqmp-r5/
BUILDMAN
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: tools/buildman/
CFI FLASH
M: Stefan Roese <sr@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-cfi-flash.git
F: drivers/mtd/cfi_flash.c
F: drivers/mtd/jedec_flash.c
COLDFIRE
M: Huan Wang <alison.wang@nxp.com>
M: Angelo Dureghello <angelo@sysam.it>
S: Maintained
T: git git://git.denx.de/u-boot-coldfire.git
F: arch/m68k/
DFU
M: Lukasz Majewski <lukma@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-dfu.git
F: drivers/dfu/
F: drivers/usb/gadget/
DRIVER MODEL
M: Simon Glass <sjg@chromium.org>
S: Maintained
T: git git://git.denx.de/u-boot-dm.git
F: drivers/core/
F: include/dm/
F: test/dm/
EFI PAYLOAD
M: Alexander Graf <agraf@suse.de>
S: Maintained
T: git git://github.com/agraf/u-boot.git
F: doc/DocBook/efi.tmpl
F: doc/README.uefi
F: doc/README.iscsi
F: include/efi*
F: include/pe.h
F: include/asm-generic/pe.h
F: lib/efi*/
F: test/py/tests/test_efi*
F: cmd/bootefi.c
F: tools/file2include.c
FLATTENED DEVICE TREE
M: Simon Glass <sjg@chromium.org>
S: Maintained
T: git git://git.denx.de/u-boot-fdt.git
F: lib/fdtdec*
F: lib/libfdt/
F: include/fdt*
F: include/linux/libfdt*
F: cmd/fdt.c
F: common/fdt_support.c
FREEBSD
M: Rafal Jaworowski <raj@semihalf.com>
S: Maintained
T: git git://git.denx.de/u-boot-freebsd.git
FREESCALE QORIQ
M: York Sun <york.sun@nxp.com>
S: Maintained
T: git git://git.denx.de/u-boot-fsl-qoriq.git
I2C
M: Heiko Schocher <hs@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-i2c.git
F: drivers/i2c/
LOGGING
M: Simon Glass <sjg@chromium.org>
S: Maintained
T: git git://git.denx.de/u-boot.git
F: common/log.c
F: cmd/log.c
F: test/log/log_test.c
F: test/py/tests/test_log.py
MICROBLAZE
M: Michal Simek <monstr@monstr.eu>
S: Maintained
T: git git://git.denx.de/u-boot-microblaze.git
F: arch/microblaze/
F: cmd/mfsl.c
F: drivers/gpio/xilinx_gpio.c
F: drivers/net/xilinx_axi_emac.c
F: drivers/net/xilinx_emaclite.c
F: drivers/serial/serial_xuartlite.c
F: drivers/spi/xilinx_spi.c
F: drivers/watchdog/xilinx_tb_wdt.c
N: xilinx
MIPS
M: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
S: Maintained
T: git git://git.denx.de/u-boot-mips.git
F: arch/mips/
MMC
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Maintained
T: git git://git.denx.de/u-boot-mmc.git
F: drivers/mmc/
NAND FLASH
M: Scott Wood <oss@buserror.net>
S: Maintained
T: git git://git.denx.de/u-boot-nand-flash.git
F: drivers/mtd/nand/
NDS32
M: Macpaul Lin <macpaul@andestech.com>
S: Maintained
T: git git://git.denx.de/u-boot-nds32.git
F: arch/nds32/
NETWORK
M: Joe Hershberger <joe.hershberger@ni.com>
S: Maintained
T: git git://git.denx.de/u-boot-net.git
F: drivers/net/
F: net/
NIOS
M: Thomas Chou <thomas@wytron.com.tw>
S: Maintained
T: git git://git.denx.de/u-boot-nios.git
F: arch/nios2/
ONENAND
#M: Lukasz Majewski <l.majewski@majess.pl>
S: Orphaned (Since 2017-01)
T: git git://git.denx.de/u-boot-onenand.git
F: drivers/mtd/onenand/
PATMAN
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: tools/patman/
POWER
M: Jaehoon Chung <jh80.chung@samsung.com>
S: Maintained
T: git git://git.denx.de/u-boot-pmic.git
F: drivers/power/
POWERPC
M: Wolfgang Denk <wd@denx.de>
S: Maintained
F: arch/powerpc/
POWERPC MPC8XX
M: Christophe Leroy <christophe.leroy@c-s.fr>
S: Maintained
T: git git://git.denx.de/u-boot-mpc8xx.git
F: arch/powerpc/cpu/mpc8xx/
POWERPC MPC83XX
M: Mario Six <mario.six@gdsys.cc>
S: Maintained
T: git git://git.denx.de/u-boot-mpc83xx.git
F: arch/powerpc/cpu/mpc83xx/
F: arch/powerpc/include/asm/arch-mpc83xx/
POWERPC MPC85XX
M: York Sun <york.sun@nxp.com>
S: Maintained
T: git git://git.denx.de/u-boot-mpc85xx.git
F: arch/powerpc/cpu/mpc85xx/
POWERPC MPC86XX
M: York Sun <york.sun@nxp.com>
S: Maintained
T: git git://git.denx.de/u-boot-mpc86xx.git
F: arch/powerpc/cpu/mpc86xx/
RISC-V
M: Rick Chen <rick@andestech.com>
S: Maintained
T: git git://git.denx.de/u-boot-riscv.git
F: arch/riscv/
F: tools/prelink-riscv.c
ROCKUSB
M: Eddie Cai <eddie.cai.linux@gmail.com>
S: Maintained
F: drivers/usb/gadget/f_rockusb.c
F: cmd/rockusb.c
F: doc/README.rockusb
SANDBOX
M: Simon Glass <sjg@chromium.org>
S: Maintained
F: arch/sandbox/
SH
M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
S: Maintained
T: git git://git.denx.de/u-boot-sh.git
F: arch/sh/
SPI
M: Jagan Teki <jagan@openedev.com>
S: Maintained
T: git git://git.denx.de/u-boot-spi.git
F: drivers/mtd/spi/
F: drivers/spi/
F: include/spi*
SPMI
M: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
S: Maintained
F: drivers/spmi/
F: include/spmi/
TI SYSTEM SECURITY
M: Andrew F. Davis <afd@ti.com>
S: Supported
F: arch/arm/mach-omap2/omap5/sec_entry_cpu1.S
F: arch/arm/mach-omap2/sec-common.c
F: arch/arm/mach-omap2/config_secure.mk
F: configs/am335x_hs_evm_defconfig
F: configs/am335x_hs_evm_uart_defconfig
F: configs/am43xx_hs_evm_defconfig
F: configs/am57xx_hs_evm_defconfig
F: configs/dra7xx_hs_evm_defconfig
F: configs/k2hk_hs_evm_defconfig
F: configs/k2e_hs_evm_defconfig
F: configs/k2g_hs_evm_defconfig
F: configs/k2l_hs_evm_defconfig
TQ GROUP
#M: Martin Krause <martin.krause@tq-systems.de>
S: Orphaned (Since 2016-02)
T: git git://git.denx.de/u-boot-tq-group.git
UBI
M: Kyungmin Park <kmpark@infradead.org>
M: Heiko Schocher <hs@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-ubi.git
F: drivers/mtd/ubi/
USB
M: Marek Vasut <marex@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-usb.git
F: drivers/usb/
USB xHCI
M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
T: git git://git.denx.de/u-boot-usb.git topic-xhci
F: drivers/usb/host/xhci*
VIDEO
M: Anatolij Gustschin <agust@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-video.git
F: drivers/video/
F: common/lcd*.c
F: include/lcd*.h
X86
M: Simon Glass <sjg@chromium.org>
M: Bin Meng <bmeng.cn@gmail.com>
S: Maintained
T: git git://git.denx.de/u-boot-x86.git
F: arch/x86/
XTENSA
M: Max Filippov <jcmvbkbc@gmail.com>
S: Maintained
F: arch/xtensa/
THE REST
M: Tom Rini <trini@konsulko.com>
L: u-boot@lists.denx.de
Q: http://patchwork.ozlabs.org/project/uboot/list/
S: Maintained
T: git git://git.denx.de/u-boot.git
F: *
F: */