Unverified Commit 75bb3af5 authored by Johannes Schauer Marin Rodrigues's avatar Johannes Schauer Marin Rodrigues
Browse files

src/source/advanced.rst: document size of barrel jack connector

parent a8535386
Pipeline #595 failed with stage
......@@ -41,7 +41,7 @@ If you then switch on Reform (powered by the wall adapter) with the provided SD
Power Rails
+++++++++++
Reform will accept 9-32V of DC power on barrel jack J1. The nominal input voltage is 24V. If you can't measure the input voltage on R49, check if fuse F1 is blown.
Reform will accept 9-32V of DC power on barrel jack J1. The barrel jack plug is sized with 5.5 mm outer diameter (OD) and 2.1 mm inner diameter (ID), with positive inner contact (IEC 60130-10:1971 Type A). The nominal input voltage is 24V. If you can't measure the input voltage on R49, check if fuse F1 is blown.
Either wall or battery power will be regulated to ~29V by the buck-boost regulator/charger LTC4020 and output to the main system regulators. U14 is the always-on 3V3 regulator that powers critical chips like the System Controller (LPC11U24, U18). You can confirm LPC_VCC power with 3.3V on J22 pin 15.
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment