boundary: cmd_kbd bd_common initial addition
boundary: add max77823_init common routine
boundary: common: more addition
boundary: move board_type out of BSS section
boundary: pass const i2c_pads_info to common_board_init
boundary: add .scr to our script names to run, ie. upgrade.scr
boundary: common: padctrl-mx6: add INPUT_FLOAT
boundary: common: max77823: add max77823_otg_power
boundary: add CONFIG_VIDEO_MXS for imx6sx/imx7d
boundary: common: max77823: add max77823_boost_power
boundary: common: add MAX77823 for TARGET_CID_TAB
boundary: common: add fan53526 0.6-1.4V regulator
boundary: common add 1066mhz_4x256mx16.cfg

This is replacing nitrogen6x/1066mhz_4x256mx16.cfg
boundary: common: max77823: allow wcin source
boundary: common: ddr-setup: use WALAT value provided
boundary: common: add 1066mhz_4x128mx16.cfg
boundary: common: add 800mhz_4x128mx16.cfg
boundary: common: add CONFIG_DEFAULT_HITACHI_HVGA
boundary: common: add tamper support
boundary: common: add uboot_release environment variable
boundary: common: padctrl-mx51: add PAD_CTRL_INPUT
boundary: common: bd_common: fix warning by declaring snvs_regs
boundary: boundary.h: check for CONFIG_ENV_OFFSET already defined
boundary: boundary.h: allow override of BD_CONSOLE_STR
boundary: common: 800mhz_4x128mx16.cfg: use common values

This is in preparation to delete this file.

CFG0: 0x40435323 to 0x3f435333
tRFC - 65 to 64 clocks
tFAW - 19 to 20 clocks

CFG1: 0xB66E8D63 to 0xb68e8b63
tRC from 20 to 21 clocks
tWR from 7 to 6 clocks

MR0: 0x13208030 to 0x15208030
tWR from 5 to 6 clocks

boundary: common: add ddr configuration files
boundary: common: remove no longer used files
boundary: common: add CONFIG_OTG_CHARGER, used by cid board
boundary: common: max77823: determine USB cable type

Use cable type to limit chrgin current so that the kernel
will not print "vbus is not valid" when battery is
mostly charged. U-boot consumption is low enough to not
need the current limited, but booting kernel needs it limited.

boundary: common: add max77823_is_charging
max77823: initialize MAX77823_CHG_CNFG_01 for restart threshold
boundary: common: max77823: add max77834_power_check
boundary: common: add cmd_otg_cable

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>

boundary.h: allow to customize boot media priority

Default is MMC > SATA > USB.

If a platform needs a different sequence, simply define
BOOT_TARGET_DEVICES in the board header.

Also removing BD_BOOT_DEVS since BOOT_TARGET_DEVICES makes it obsolete.
boundary.h: cleanup and ums mechanism removal
boundary.h: remove unnecessary active_partition variable
boundary: common: fix splash screen preparation

Macro CONFIG_SPLASH_SCREEN_PREPARE did not exist.
boundary: common: add serial# variable for fastboot/dfu use
boundary: allow CONFIG_ENV_IS_NOWHERE to be used

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>