diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 4b31dcca2015c6d1cc84f75f08aa3863f27c7116..adbd2b57160a76b002729fda7c468c25fcddc831 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -185,6 +185,16 @@ config VIDEO_VGA_VIA_LCD
 	LCD interface driving a VGA connector, such as found on the
 	Olimex A13 boards.
 
+config VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	boolean "Force sync active high for VGA via LCD controller support"
+	depends on VIDEO_VGA_VIA_LCD
+	default n
+	---help---
+	Say Y here if you've a board which uses opendrain drivers for the vga
+	hsync and vsync signals. Opendrain drivers cannot generate steep enough
+	positive edges for a stable video output, so on boards with opendrain
+	drivers the sync signals must always be active high.
+
 config VIDEO_VGA_EXTERNAL_DAC_EN
 	string "LCD panel power enable pin"
 	depends on VIDEO_VGA_VIA_LCD
diff --git a/configs/A13-OLinuXinoM_defconfig b/configs/A13-OLinuXinoM_defconfig
index 1c3fc3a3e9a63950f5b98fce8334579eeee91447..a04f2b3362d2e695e98e1520303c0ae96a39095f 100644
--- a/configs/A13-OLinuXinoM_defconfig
+++ b/configs/A13-OLinuXinoM_defconfig
@@ -4,6 +4,7 @@ CONFIG_FDTFILE="sun5i-a13-olinuxino-micro.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
+CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 # For use with the Olimex 7" LCD module, adjust timings for other displays
 # Set video-mode=sunxi:800x600-24@60,monitor=lcd in the env. to enable
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
diff --git a/configs/A13-OLinuXino_defconfig b/configs/A13-OLinuXino_defconfig
index 0daaaae5b41340bda931744de1dd623d1f853074..806d5b7bd5346f93518494393324581c2809e0cc 100644
--- a/configs/A13-OLinuXino_defconfig
+++ b/configs/A13-OLinuXino_defconfig
@@ -4,6 +4,7 @@ CONFIG_FDTFILE="sun5i-a13-olinuxino.dtb"
 CONFIG_USB1_VBUS_PIN="PG11"
 CONFIG_VIDEO_HDMI=n
 CONFIG_VIDEO_VGA_VIA_LCD=y
+CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH=y
 # For use with the Olimex 7" LCD module, adjust timings for other displays
 # Set video-mode=sunxi:800x600-24@60,monitor=lcd in the env. to enable
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:3,vmode:0"
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index af728b51c746783e46d3edc06b01538814dd44ea..f5f24fc020bd793d2e1de7914f99d032e55a5743 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -645,7 +645,8 @@ static int sunxi_lcdc_get_clk_delay(const struct ctfb_res_modes *mode)
 	return (delay > 30) ? 30 : delay;
 }
 
-static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
+static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
+				      bool for_ext_vga_dac)
 {
 	struct sunxi_lcdc_reg * const lcdc =
 		(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
@@ -719,6 +720,11 @@ static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode)
 		val |= SUNXI_LCDC_TCON_HSYNC_MASK;
 	if (!(mode->sync & FB_SYNC_VERT_HIGH_ACT))
 		val |= SUNXI_LCDC_TCON_VSYNC_MASK;
+
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD_FORCE_SYNC_ACTIVE_HIGH
+	if (for_ext_vga_dac)
+		val = 0;
+#endif
 	writel(val, &lcdc->tcon0_io_polarity);
 
 	writel(0, &lcdc->tcon0_io_tristate);
@@ -1015,7 +1021,7 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 			hitachi_tx18d42vm_init();
 		}
 		sunxi_composer_mode_set(mode, address);
-		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_lcdc_tcon0_mode_set(mode, false);
 		sunxi_composer_enable();
 		sunxi_lcdc_enable();
 #ifdef CONFIG_VIDEO_LCD_SSD2828
@@ -1033,7 +1039,7 @@ static void sunxi_mode_set(const struct ctfb_res_modes *mode,
 		sunxi_vga_enable();
 #elif defined CONFIG_VIDEO_VGA_VIA_LCD
 		sunxi_composer_mode_set(mode, address);
-		sunxi_lcdc_tcon0_mode_set(mode);
+		sunxi_lcdc_tcon0_mode_set(mode, true);
 		sunxi_composer_enable();
 		sunxi_lcdc_enable();
 		sunxi_vga_external_dac_enable();