diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 68ae6b6d06d2255d2ce62fc114e4d736793fd2d7..ab621cca7dfde27da17870e7c195c15f8cd71d12 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -117,6 +117,7 @@ config ARCH_MVEBU
select OF_CONTROL
select OF_SEPARATE
select DM
+ select DM_ETH
select DM_SERIAL
select DM_SPI
select DM_SPI_FLASH
diff --git a/arch/arm/mach-mvebu/cpu.c b/arch/arm/mach-mvebu/cpu.c
index 895ad929b10721e4f1d28c0402efd71fc97ade42..751dabc5a69d6e083a1a8b15292b924113ab5035 100644
--- a/arch/arm/mach-mvebu/cpu.c
+++ b/arch/arm/mach-mvebu/cpu.c
@@ -326,30 +326,6 @@ int arch_misc_init(void)
}
#endif /* CONFIG_ARCH_MISC_INIT */
-#ifdef CONFIG_MVNETA
-int cpu_eth_init(bd_t *bis)
-{
- u32 enet_base[] = { MVEBU_EGIGA0_BASE, MVEBU_EGIGA1_BASE,
- MVEBU_EGIGA2_BASE, MVEBU_EGIGA3_BASE };
- u8 phy_addr[] = CONFIG_PHY_ADDR;
- int i;
-
- /*
- * Only Armada XP supports all 4 ethernet interfaces. A38x has
- * slightly different base addresses for its 2-3 interfaces.
- */
- if (mvebu_soc_family() != MVEBU_SOC_AXP) {
- enet_base[1] = MVEBU_EGIGA2_BASE;
- enet_base[2] = MVEBU_EGIGA3_BASE;
- }
-
- for (i = 0; i < ARRAY_SIZE(phy_addr); i++)
- mvneta_initialize(bis, enet_base[i], i, phy_addr[i]);
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_MV_SDHCI
int board_mmc_init(bd_t *bis)
{
diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h
index 3cdb1f24d77b912e7bca3ec853aa9e84ac442408..2be8cbac3f4e5006306590ce28e180ed7cdc59c0 100644
--- a/arch/arm/mach-mvebu/include/mach/soc.h
+++ b/arch/arm/mach-mvebu/include/mach/soc.h
@@ -57,13 +57,9 @@
#define MVEBU_CPU_WIN_BASE (MVEBU_REGISTER(0x20000))
#define MVEBU_SDRAM_BASE (MVEBU_REGISTER(0x20180))
#define MVEBU_TIMER_BASE (MVEBU_REGISTER(0x20300))
-#define MVEBU_EGIGA2_BASE (MVEBU_REGISTER(0x30000))
-#define MVEBU_EGIGA3_BASE (MVEBU_REGISTER(0x34000))
#define MVEBU_REG_PCIE_BASE (MVEBU_REGISTER(0x40000))
#define MVEBU_AXP_USB_BASE (MVEBU_REGISTER(0x50000))
#define MVEBU_USB20_BASE (MVEBU_REGISTER(0x58000))
-#define MVEBU_EGIGA0_BASE (MVEBU_REGISTER(0x70000))
-#define MVEBU_EGIGA1_BASE (MVEBU_REGISTER(0x74000))
#define MVEBU_AXP_SATA_BASE (MVEBU_REGISTER(0xa0000))
#define MVEBU_SATA0_BASE (MVEBU_REGISTER(0xa8000))
#define MVEBU_NAND_BASE (MVEBU_REGISTER(0xd0000))
diff --git a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
index d7aa1499adf00aa6484107d8d9c6f7c70ebd2a9c..93052841170eb77b99e2f3646d8769d9741f8ca1 100644
--- a/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
+++ b/board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
@@ -87,40 +87,32 @@ int board_eth_init(bd_t *bis)
return pci_eth_init(bis);
}
-#ifdef CONFIG_RESET_PHY_R
-/* Configure and enable MV88E1545 PHY */
-void reset_phy(void)
+int board_phy_config(struct phy_device *phydev)
{
- u8 phy_addr[] = CONFIG_PHY_ADDR;
- u16 devadr = phy_addr[0];
- char *name = "neta0";
u16 reg;
- if (miiphy_set_current_dev(name))
- return;
-
/* Enable QSGMII AN */
/* Set page to 4 */
- miiphy_write(name, devadr, 0x16, 4);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x16, 4);
/* Enable AN */
- miiphy_write(name, devadr, 0x0, 0x1140);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x0, 0x1140);
/* Set page to 0 */
- miiphy_write(name, devadr, 0x16, 0);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x16, 0);
/* Phy C_ANEG */
- miiphy_read(name, devadr, 0x4, ®);
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, 0x4);
reg |= 0x1E0;
- miiphy_write(name, devadr, 0x4, reg);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0x4, reg);
/* Soft-Reset */
- miiphy_write(name, devadr, 22, 0x0000);
- miiphy_write(name, devadr, 0, 0x9140);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000);
+ phy_write(phydev, MDIO_DEVAD_NONE, 0, 0x9140);
/* Power up the phy */
- miiphy_read(name, devadr, ETH_PHY_CTRL_REG, ®);
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, ETH_PHY_CTRL_REG);
reg &= ~(ETH_PHY_CTRL_POWER_DOWN_MASK);
- miiphy_write(name, devadr, ETH_PHY_CTRL_REG, reg);
+ phy_write(phydev, MDIO_DEVAD_NONE, ETH_PHY_CTRL_REG, reg);
- printf("88E1545 Initialized on %s\n", name);
+ printf("88E1545 Initialized\n");
+ return 0;
}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/maxbcm/maxbcm.c b/board/maxbcm/maxbcm.c
index 119ba4c6c8f670f84d8afb21aeeeed2eebbafbf6..db6ad99efea10da9a5f07dd33034dc498aad7d6d 100644
--- a/board/maxbcm/maxbcm.c
+++ b/board/maxbcm/maxbcm.c
@@ -138,17 +138,15 @@ int checkboard(void)
return 0;
}
-#ifdef CONFIG_RESET_PHY_R
/* Configure and enable MV88E6185 switch */
-void reset_phy(void)
+int board_phy_config(struct phy_device *phydev)
{
- char *name = "neta0";
-
- if (miiphy_set_current_dev(name))
- return;
-
- /* todo: fill this with the real setup / config code */
-
- printf("88E6185 Initialized on %s\n", name);
+ /*
+ * todo:
+ * Fill this with the real setup / config code.
+ * Please see board/Marvell/db-mv784mp-gp/db-mv784mp-gp.c
+ * for details.
+ */
+ printf("88E6185 Initialized\n");
+ return 0;
}
-#endif /* CONFIG_RESET_PHY_R */
diff --git a/drivers/net/mvneta.c b/drivers/net/mvneta.c
index 38ad14eff96dc8a62dc0bba4af2b5a41d8986583..fa20f548e5202032947dac1c49ec33a9ddf2c64b 100644
--- a/drivers/net/mvneta.c
+++ b/drivers/net/mvneta.c
@@ -2,7 +2,7 @@
* Driver for Marvell NETA network card for Armada XP and Armada 370 SoCs.
*
* U-Boot version:
- * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ * Copyright (C) 2014-2015 Stefan Roese <sr@denx.de>
*
* Based on the Linux version which is:
* Copyright (C) 2012 Marvell
@@ -14,6 +14,7 @@
*/
#include <common.h>
+#include <dm.h>
#include <net.h>
#include <netdev.h>
#include <config.h>
@@ -28,6 +29,8 @@
#include <linux/compat.h>
#include <linux/mbus.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#if !defined(CONFIG_PHYLIB)
# error Marvell mvneta requires PHYLIB
#endif
@@ -1115,9 +1118,9 @@ static void mvneta_start_dev(struct mvneta_port *pp)
mvneta_port_enable(pp);
}
-static void mvneta_adjust_link(struct eth_device *dev)
+static void mvneta_adjust_link(struct udevice *dev)
{
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = dev_get_priv(dev);
struct phy_device *phydev = pp->phydev;
int status_change = 0;
@@ -1171,9 +1174,9 @@ static void mvneta_adjust_link(struct eth_device *dev)
}
}
-static int mvneta_open(struct eth_device *dev)
+static int mvneta_open(struct udevice *dev)
{
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = dev_get_priv(dev);
int ret;
ret = mvneta_setup_rxqs(pp);
@@ -1192,7 +1195,7 @@ static int mvneta_open(struct eth_device *dev)
}
/* Initialize hw */
-static int mvneta_init(struct mvneta_port *pp)
+static int mvneta_init2(struct mvneta_port *pp)
{
int queue;
@@ -1314,23 +1317,22 @@ static int mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
}
/* Device initialization routine */
-static int mvneta_probe(struct eth_device *dev)
+static int mvneta_init(struct udevice *dev)
{
- struct mvneta_port *pp = dev->priv;
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct mvneta_port *pp = dev_get_priv(dev);
int err;
pp->tx_ring_size = MVNETA_MAX_TXD;
pp->rx_ring_size = MVNETA_MAX_RXD;
- err = mvneta_init(pp);
+ err = mvneta_init2(pp);
if (err < 0) {
dev_err(&pdev->dev, "can't init eth hal\n");
return err;
}
- mvneta_conf_mbus_windows(pp);
-
- mvneta_mac_addr_set(pp, dev->enetaddr, rxq_def);
+ mvneta_mac_addr_set(pp, pdata->enetaddr, rxq_def);
err = mvneta_port_power_up(pp, pp->phy_interface);
if (err < 0) {
@@ -1367,25 +1369,24 @@ static int smi_wait_ready(struct mvneta_port *pp)
}
/*
- * smi_reg_read - miiphy_read callback function.
+ * mvneta_mdio_read - miiphy_read callback function.
*
* Returns 16bit phy register value, or 0xffff on error
*/
-static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
+static int mvneta_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = bus->priv;
u32 smi_reg;
u32 timeout;
/* check parameters */
- if (phy_adr > MVNETA_PHY_ADDR_MASK) {
- printf("Error: Invalid PHY address %d\n", phy_adr);
+ if (addr > MVNETA_PHY_ADDR_MASK) {
+ printf("Error: Invalid PHY address %d\n", addr);
return -EFAULT;
}
- if (reg_ofs > MVNETA_PHY_REG_MASK) {
- printf("Err: Invalid register offset %d\n", reg_ofs);
+ if (reg > MVNETA_PHY_REG_MASK) {
+ printf("Err: Invalid register offset %d\n", reg);
return -EFAULT;
}
@@ -1394,14 +1395,14 @@ static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
return -EFAULT;
/* fill the phy address and regiser offset and read opcode */
- smi_reg = (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
- | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS)
+ smi_reg = (addr << MVNETA_SMI_DEV_ADDR_OFFS)
+ | (reg << MVNETA_SMI_REG_ADDR_OFFS)
| MVNETA_SMI_OPCODE_READ;
/* write the smi register */
mvreg_write(pp, MVNETA_SMI, smi_reg);
- /*wait till read value is ready */
+ /* wait till read value is ready */
timeout = MVNETA_SMI_TIMEOUT;
do {
@@ -1417,31 +1418,29 @@ static int smi_reg_read(const char *devname, u8 phy_adr, u8 reg_ofs, u16 *data)
for (timeout = 0; timeout < MVNETA_SMI_TIMEOUT; timeout++)
;
- *data = (u16)(mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK);
-
- return 0;
+ return mvreg_read(pp, MVNETA_SMI) & MVNETA_SMI_DATA_MASK;
}
/*
- * smi_reg_write - imiiphy_write callback function.
+ * mvneta_mdio_write - miiphy_write callback function.
*
* Returns 0 if write succeed, -EINVAL on bad parameters
* -ETIME on timeout
*/
-static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
+static int mvneta_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
+ u16 value)
{
- struct eth_device *dev = eth_get_dev_by_name(devname);
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = bus->priv;
u32 smi_reg;
/* check parameters */
- if (phy_adr > MVNETA_PHY_ADDR_MASK) {
- printf("Error: Invalid PHY address %d\n", phy_adr);
+ if (addr > MVNETA_PHY_ADDR_MASK) {
+ printf("Error: Invalid PHY address %d\n", addr);
return -EFAULT;
}
- if (reg_ofs > MVNETA_PHY_REG_MASK) {
- printf("Err: Invalid register offset %d\n", reg_ofs);
+ if (reg > MVNETA_PHY_REG_MASK) {
+ printf("Err: Invalid register offset %d\n", reg);
return -EFAULT;
}
@@ -1450,9 +1449,9 @@ static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
return -EFAULT;
/* fill the phy addr and reg offset and write opcode and data */
- smi_reg = (data << MVNETA_SMI_DATA_OFFS);
- smi_reg |= (phy_adr << MVNETA_SMI_DEV_ADDR_OFFS)
- | (reg_ofs << MVNETA_SMI_REG_ADDR_OFFS);
+ smi_reg = value << MVNETA_SMI_DATA_OFFS;
+ smi_reg |= (addr << MVNETA_SMI_DEV_ADDR_OFFS)
+ | (reg << MVNETA_SMI_REG_ADDR_OFFS);
smi_reg &= ~MVNETA_SMI_OPCODE_READ;
/* write the smi register */
@@ -1461,9 +1460,9 @@ static int smi_reg_write(const char *devname, u8 phy_adr, u8 reg_ofs, u16 data)
return 0;
}
-static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
+static int mvneta_start(struct udevice *dev)
{
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = dev_get_priv(dev);
struct phy_device *phydev;
mvneta_port_power_up(pp, pp->phy_interface);
@@ -1483,7 +1482,7 @@ static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
}
/* Full init on first call */
- mvneta_probe(dev);
+ mvneta_init(dev);
pp->init = 1;
} else {
/* Upon all following calls, this is enough */
@@ -1494,9 +1493,9 @@ static int mvneta_init_u_boot(struct eth_device *dev, bd_t *bis)
return 0;
}
-static int mvneta_send(struct eth_device *dev, void *ptr, int len)
+static int mvneta_send(struct udevice *dev, void *packet, int length)
{
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = dev_get_priv(dev);
struct mvneta_tx_queue *txq = &pp->txqs[0];
struct mvneta_tx_desc *tx_desc;
int sent_desc;
@@ -1505,9 +1504,9 @@ static int mvneta_send(struct eth_device *dev, void *ptr, int len)
/* Get a descriptor for the first part of the packet */
tx_desc = mvneta_txq_next_desc_get(txq);
- tx_desc->buf_phys_addr = (u32)ptr;
- tx_desc->data_size = len;
- flush_dcache_range((u32)ptr, (u32)ptr + len);
+ tx_desc->buf_phys_addr = (u32)packet;
+ tx_desc->data_size = length;
+ flush_dcache_range((u32)packet, (u32)packet + length);
/* First and Last descriptor */
tx_desc->command = MVNETA_TX_L4_CSUM_NOT | MVNETA_TXD_FLZ_DESC;
@@ -1525,28 +1524,25 @@ static int mvneta_send(struct eth_device *dev, void *ptr, int len)
/* txDone has increased - hw sent packet */
mvneta_txq_sent_desc_dec(pp, txq, sent_desc);
- return 0;
return 0;
}
-static int mvneta_recv(struct eth_device *dev)
+static int mvneta_recv(struct udevice *dev, int flags, uchar **packetp)
{
- struct mvneta_port *pp = dev->priv;
+ struct mvneta_port *pp = dev_get_priv(dev);
int rx_done;
- int packets_done;
struct mvneta_rx_queue *rxq;
+ int rx_bytes = 0;
/* get rx queue */
rxq = mvneta_rxq_handle_get(pp, rxq_def);
rx_done = mvneta_rxq_busy_desc_num_get(pp, rxq);
- packets_done = rx_done;
- while (packets_done--) {
+ if (rx_done) {
struct mvneta_rx_desc *rx_desc;
unsigned char *data;
u32 rx_status;
- int rx_bytes;
/*
* No cache invalidation needed here, since the desc's are
@@ -1559,7 +1555,7 @@ static int mvneta_recv(struct eth_device *dev)
(rx_status & MVNETA_RXD_ERR_SUMMARY)) {
mvneta_rx_error(pp, rx_desc);
/* leave the descriptor untouched */
- continue;
+ return -EIO;
}
/* 2 bytes for marvell header. 4 bytes for crc */
@@ -1571,40 +1567,24 @@ static int mvneta_recv(struct eth_device *dev)
* No cache invalidation needed here, since the rx_buffer's are
* located in a uncached memory region
*/
- net_process_received_packet(data, rx_bytes);
- }
+ *packetp = data;
- /* Update rxq management counters */
- if (rx_done)
mvneta_rxq_desc_num_update(pp, rxq, rx_done, rx_done);
+ }
- return 0;
-}
-
-static void mvneta_halt(struct eth_device *dev)
-{
- struct mvneta_port *pp = dev->priv;
-
- mvneta_port_down(pp);
- mvneta_port_disable(pp);
+ return rx_bytes;
}
-int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
+static int mvneta_probe(struct udevice *dev)
{
- struct eth_device *dev;
- struct mvneta_port *pp;
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ struct mvneta_port *pp = dev_get_priv(dev);
+ void *blob = (void *)gd->fdt_blob;
+ int node = dev->of_offset;
+ struct mii_dev *bus;
+ unsigned long addr;
void *bd_space;
- dev = calloc(1, sizeof(*dev));
- if (dev == NULL)
- return -ENOMEM;
-
- pp = calloc(1, sizeof(*pp));
- if (pp == NULL)
- return -ENOMEM;
-
- dev->priv = pp;
-
/*
* Allocate buffer area for descs and rx_buffers. This is only
* done once for all interfaces. As only one interface can
@@ -1625,28 +1605,82 @@ int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr)
MVNETA_MAX_RXD * sizeof(struct mvneta_rx_desc));
}
- sprintf(dev->name, "neta%d", devnum);
+ pp->base = (void __iomem *)pdata->iobase;
- pp->base = (void __iomem *)base_addr;
- dev->iobase = base_addr;
- dev->init = mvneta_init_u_boot;
- dev->halt = mvneta_halt;
- dev->send = mvneta_send;
- dev->recv = mvneta_recv;
- dev->write_hwaddr = NULL;
+ /* Configure MBUS address windows */
+ mvneta_conf_mbus_windows(pp);
- /*
- * The PHY interface type is configured via the
- * board specific CONFIG_SYS_NETA_INTERFACE_TYPE
- * define.
- */
- pp->phy_interface = CONFIG_SYS_NETA_INTERFACE_TYPE;
+ /* PHY interface is already decoded in mvneta_ofdata_to_platdata() */
+ pp->phy_interface = pdata->phy_interface;
+
+ /* Now read phyaddr from DT */
+ addr = fdtdec_get_int(blob, node, "phy", 0);
+ addr = fdt_node_offset_by_phandle(blob, addr);
+ pp->phyaddr = fdtdec_get_int(blob, addr, "reg", 0);
+
+ bus = mdio_alloc();
+ if (!bus) {
+ printf("Failed to allocate MDIO bus\n");
+ return -ENOMEM;
+ }
+
+ bus->read = mvneta_mdio_read;
+ bus->write = mvneta_mdio_write;
+ snprintf(bus->name, sizeof(bus->name), dev->name);
+ bus->priv = (void *)pp;
+ pp->bus = bus;
- eth_register(dev);
+ return mdio_register(bus);
+}
- pp->phyaddr = phy_addr;
- miiphy_register(dev->name, smi_reg_read, smi_reg_write);
- pp->bus = miiphy_get_dev_by_name(dev->name);
+static void mvneta_stop(struct udevice *dev)
+{
+ struct mvneta_port *pp = dev_get_priv(dev);
- return 1;
+ mvneta_port_down(pp);
+ mvneta_port_disable(pp);
}
+
+static const struct eth_ops mvneta_ops = {
+ .start = mvneta_start,
+ .send = mvneta_send,
+ .recv = mvneta_recv,
+ .stop = mvneta_stop,
+};
+
+static int mvneta_ofdata_to_platdata(struct udevice *dev)
+{
+ struct eth_pdata *pdata = dev_get_platdata(dev);
+ const char *phy_mode;
+
+ pdata->iobase = dev_get_addr(dev);
+
+ /* Get phy-mode / phy_interface from DT */
+ pdata->phy_interface = -1;
+ phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL);
+ if (phy_mode)
+ pdata->phy_interface = phy_get_interface_by_name(phy_mode);
+ if (pdata->phy_interface == -1) {
+ debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct udevice_id mvneta_ids[] = {
+ { .compatible = "marvell,armada-370-neta" },
+ { .compatible = "marvell,armada-xp-neta" },
+ { }
+};
+
+U_BOOT_DRIVER(mvneta) = {
+ .name = "mvneta",
+ .id = UCLASS_ETH,
+ .of_match = mvneta_ids,
+ .ofdata_to_platdata = mvneta_ofdata_to_platdata,
+ .probe = mvneta_probe,
+ .ops = &mvneta_ops,
+ .priv_auto_alloc_size = sizeof(struct mvneta_port),
+ .platdata_auto_alloc_size = sizeof(struct eth_pdata),
+};
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index 55ba7d30a62f9ba0cd46955ccef07c2f016961fa..a6ecba3bd1cac20f86cae5d5a03eb26a75140e4c 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -99,8 +99,6 @@
#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
-#define CONFIG_PHY_ADDR { 1, 0 }
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
/* PCIe support */
@@ -109,7 +107,6 @@
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_E1000 /* enable Intel E1000 support for testing */
#endif
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
diff --git a/include/configs/db-mv784mp-gp.h b/include/configs/db-mv784mp-gp.h
index d0f9f897b367476b4b233e1d41f6bb7a5f0e1bd6..6c3f4447432c2c5424994ed1aba53204f1076155 100644
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@@ -64,10 +64,7 @@
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
-#define CONFIG_PHY_ADDR { 0x10, 0x11, 0x12, 0x13 }
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_QSGMII
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST
@@ -106,7 +103,6 @@
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_E1000 /* enable Intel E1000 support for testing */
#endif
/* NAND */
diff --git a/include/configs/maxbcm.h b/include/configs/maxbcm.h
index 682ce765f707366ba884c22a934b2af6da13401b..ada5267d341db284638751e3390b1373b1c5adff 100644
--- a/include/configs/maxbcm.h
+++ b/include/configs/maxbcm.h
@@ -55,10 +55,7 @@
#define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
#define CONFIG_PHY_MARVELL /* there is a marvell phy */
-#define CONFIG_PHY_ADDR { 0x0, 0x1, 0x2, 0x3 }
-#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_SGMII
#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
-#define CONFIG_RESET_PHY_R
#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CONFIG_SYS_ALT_MEMTEST