diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 3479541020b4d1fa8fcf54bed41ff11fe29ad312..e0f9d5b6b4e9cc919fbba4e1b311ecbec6f3598f 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -15,7 +15,7 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/apb_misc.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch/spl.h>
+#include <asm/spl.h>
 #include "cpu.h"
 
 void spl_board_init(void)
diff --git a/arch/arm/cpu/armv7/mx6/Makefile b/arch/arm/cpu/armv7/mx6/Makefile
index d7285fc2ccb203ffcaddca9d6bfc538a8f3121f7..6dc9f8ec2194efb79f773cf987baeaea6c594ae2 100644
--- a/arch/arm/cpu/armv7/mx6/Makefile
+++ b/arch/arm/cpu/armv7/mx6/Makefile
@@ -8,4 +8,5 @@
 #
 
 obj-y	:= soc.o clock.o
+obj-$(CONFIG_SPL_BUILD)	     += ddr.o
 obj-$(CONFIG_SECURE_BOOT)    += hab.o
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c
new file mode 100644
index 0000000000000000000000000000000000000000..0434211110bd4d1524dc6998ce8c78c71e56b66f
--- /dev/null
+++ b/arch/arm/cpu/armv7/mx6/ddr.c
@@ -0,0 +1,490 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <linux/types.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/types.h>
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+/* Configure MX6DQ mmdc iomux */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *ddr,
+		      const struct mx6dq_iomux_grp_regs *grp)
+{
+	volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+/* Configure MX6SDL mmdc iomux */
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *ddr,
+		       const struct mx6sdl_iomux_grp_regs *grp)
+{
+	volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
+	volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
+
+	mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
+	mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
+
+	/* DDR IO Type */
+	mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
+	mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
+
+	/* Clock */
+	mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
+	mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
+
+	/* Address */
+	mx6_ddr_iomux->dram_cas = ddr->dram_cas;
+	mx6_ddr_iomux->dram_ras = ddr->dram_ras;
+	mx6_grp_iomux->grp_addds = grp->grp_addds;
+
+	/* Control */
+	mx6_ddr_iomux->dram_reset = ddr->dram_reset;
+	mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
+	mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
+	mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
+	mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
+	mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
+	mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
+
+	/* Data Strobes */
+	mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
+	mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
+	mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
+		mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
+		mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
+		mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
+		mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
+	}
+
+	/* Data */
+	mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
+	mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
+	mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
+	if (width >= 32) {
+		mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
+		mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
+	}
+	if (width >= 64) {
+		mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
+		mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
+		mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
+		mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
+	}
+	mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
+	mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
+	if (width >= 32) {
+		mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
+		mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
+	}
+	if (width >= 64) {
+		mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
+		mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
+		mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
+		mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
+	}
+}
+#endif
+
+/*
+ * Configure mx6 mmdc registers based on:
+ *  - board-specific memory configuration
+ *  - board-specific calibration data
+ *  - ddr3 chip details
+ *
+ * The various calculations here are derived from the Freescale
+ * i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate MMDC
+ * configuration registers based on memory system and memory chip parameters.
+ *
+ * The defaults here are those which were specified in the spreadsheet.
+ * For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
+ * section titled MMDC initialization
+ */
+#define MR(val, ba, cmd, cs1) \
+	((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i,
+		  const struct mx6_mmdc_calibration *c,
+		  const struct mx6_ddr3_cfg *m)
+{
+	volatile struct mmdc_p_regs *mmdc0;
+	volatile struct mmdc_p_regs *mmdc1;
+	u32 reg;
+	u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
+	u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
+	u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
+	u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
+	u16 CS0_END;
+	u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
+	int clkper; /* clock period in picoseconds */
+	int clock; /* clock freq in mHz */
+	int cs;
+
+	mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
+	mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
+
+	/* MX6D/MX6Q: 1066 MHz memory clock, clkper = 1.894ns = 1894ps */
+	if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
+		clock = 528;
+		tcwl = 4;
+	}
+	/* MX6S/MX6DL: 800 MHz memory clock, clkper = 2.5ns = 2500ps */
+	else {
+		clock = 400;
+		tcwl = 3;
+	}
+	clkper = (1000*1000)/clock; /* ps */
+	todtlon = tcwl;
+	taxpd = tcwl;
+	tanpd = tcwl;
+	tcwl = tcwl;
+
+	switch (m->density) {
+	case 1: /* 1Gb per chip */
+		trfc = DIV_ROUND_UP(110000, clkper) - 1;
+		txs = DIV_ROUND_UP(120000, clkper) - 1;
+		break;
+	case 2: /* 2Gb per chip */
+		trfc = DIV_ROUND_UP(160000, clkper) - 1;
+		txs = DIV_ROUND_UP(170000, clkper) - 1;
+		break;
+	case 4: /* 4Gb per chip */
+		trfc = DIV_ROUND_UP(260000, clkper) - 1;
+		txs = DIV_ROUND_UP(270000, clkper) - 1;
+		break;
+	case 8: /* 8Gb per chip */
+		trfc = DIV_ROUND_UP(350000, clkper) - 1;
+		txs = DIV_ROUND_UP(360000, clkper) - 1;
+		break;
+	default:
+		/* invalid density */
+		printf("invalid chip density\n");
+		hang();
+		break;
+	}
+	txpr = txs;
+
+	switch (m->mem_speed) {
+	case 800:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		}
+		break;
+	case 1066:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(37500, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(50000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1;
+		}
+		break;
+	case 1333:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(45000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		}
+		break;
+	case 1600:
+		txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1;
+		tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1;
+		if (m->pagesz == 1) {
+			tfaw = DIV_ROUND_UP(30000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1;
+		} else {
+			tfaw = DIV_ROUND_UP(40000, clkper) - 1;
+			trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1;
+		}
+		break;
+	default:
+		printf("invalid memory speed\n");
+		hang();
+		break;
+	}
+	txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1;
+	tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3;
+	tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper);
+	tcksrx = tcksre;
+	taonpd = DIV_ROUND_UP(2000, clkper) - 1;
+	taofpd = taonpd;
+	trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1;
+	trcd = trp;
+	trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1;
+	tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1;
+	twr = DIV_ROUND_UP(15000, clkper) - 1;
+	tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1;
+	twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1;
+	trtp = twtr;
+	CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127;
+	debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density);
+	debug("clock: %dMHz (%d ps)\n", clock, clkper);
+	debug("memspd:%d\n", m->mem_speed);
+	debug("tcke=%d\n", tcke);
+	debug("tcksrx=%d\n", tcksrx);
+	debug("tcksre=%d\n", tcksre);
+	debug("taofpd=%d\n", taofpd);
+	debug("taonpd=%d\n", taonpd);
+	debug("todtlon=%d\n", todtlon);
+	debug("tanpd=%d\n", tanpd);
+	debug("taxpd=%d\n", taxpd);
+	debug("trfc=%d\n", trfc);
+	debug("txs=%d\n", txs);
+	debug("txp=%d\n", txp);
+	debug("txpdll=%d\n", txpdll);
+	debug("tfaw=%d\n", tfaw);
+	debug("tcl=%d\n", tcl);
+	debug("trcd=%d\n", trcd);
+	debug("trp=%d\n", trp);
+	debug("trc=%d\n", trc);
+	debug("tras=%d\n", tras);
+	debug("twr=%d\n", twr);
+	debug("tmrd=%d\n", tmrd);
+	debug("tcwl=%d\n", tcwl);
+	debug("tdllk=%d\n", tdllk);
+	debug("trtp=%d\n", trtp);
+	debug("twtr=%d\n", twtr);
+	debug("trrd=%d\n", trrd);
+	debug("txpr=%d\n", txpr);
+	debug("CS0_END=%d\n", CS0_END);
+	debug("ncs=%d\n", i->ncs);
+	debug("Rtt_wr=%d\n", i->rtt_wr);
+	debug("Rtt_nom=%d\n", i->rtt_nom);
+	debug("SRT=%d\n", m->SRT);
+	debug("tcl=%d\n", tcl);
+	debug("twr=%d\n", twr);
+
+	/*
+	 * board-specific configuration:
+	 *  These values are determined empirically and vary per board layout
+	 *  see:
+	 *   appnote, ddr3 spreadsheet
+	 */
+	mmdc0->mpwldectrl0 = c->p0_mpwldectrl0;
+	mmdc0->mpwldectrl1 = c->p0_mpwldectrl1;
+	mmdc0->mpdgctrl0 = c->p0_mpdgctrl0;
+	mmdc0->mpdgctrl1 = c->p0_mpdgctrl1;
+	mmdc0->mprddlctl = c->p0_mprddlctl;
+	mmdc0->mpwrdlctl = c->p0_mpwrdlctl;
+	if (i->dsize > 1) {
+		mmdc1->mpwldectrl0 = c->p1_mpwldectrl0;
+		mmdc1->mpwldectrl1 = c->p1_mpwldectrl1;
+		mmdc1->mpdgctrl0 = c->p1_mpdgctrl0;
+		mmdc1->mpdgctrl1 = c->p1_mpdgctrl1;
+		mmdc1->mprddlctl = c->p1_mprddlctl;
+		mmdc1->mpwrdlctl = c->p1_mpwrdlctl;
+	}
+
+	/* Read data DQ Byte0-3 delay */
+	mmdc0->mprddqby0dl = (u32)0x33333333;
+	mmdc0->mprddqby1dl = (u32)0x33333333;
+	if (i->dsize > 0) {
+		mmdc0->mprddqby2dl = (u32)0x33333333;
+		mmdc0->mprddqby3dl = (u32)0x33333333;
+	}
+	if (i->dsize > 1) {
+		mmdc1->mprddqby0dl = (u32)0x33333333;
+		mmdc1->mprddqby1dl = (u32)0x33333333;
+		mmdc1->mprddqby2dl = (u32)0x33333333;
+		mmdc1->mprddqby3dl = (u32)0x33333333;
+	}
+
+	/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
+	reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227;
+	mmdc0->mpodtctrl = reg;
+	if (i->dsize > 1)
+		mmdc1->mpodtctrl = reg;
+
+	/* complete calibration */
+	reg = (1 << 11); /* Force measurement on delay-lines */
+	mmdc0->mpmur0 = reg;
+	if (i->dsize > 1)
+		mmdc1->mpmur0 = reg;
+
+	/* Step 1: configuration request */
+	mmdc0->mdscr = (u32)(1 << 15); /* config request */
+
+	/* Step 2: Timing configuration */
+	reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) |
+	      (tfaw << 4) | tcl;
+	mmdc0->mdcfg0 = reg;
+	reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) |
+	      (1 << 15) |		/* trpa */
+	      (twr << 9) | (tmrd << 5) | tcwl;
+	mmdc0->mdcfg1 = reg;
+	reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
+	mmdc0->mdcfg2 = reg;
+	reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) |
+	      (todtlon << 12) | (todt_idle_off << 4);
+	mmdc0->mdotc = reg;
+	mmdc0->mdasp = CS0_END; /* CS addressing */
+
+	/* Step 3: Configure DDR type */
+	reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) |
+	      (i->mif3_mode << 9) | (i->ralat << 6);
+	mmdc0->mdmisc = reg;
+
+	/* Step 4: Configure delay while leaving reset */
+	reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0);
+	mmdc0->mdor = reg;
+
+	/* Step 5: Configure DDR physical parameters (density and burst len) */
+	reg = (m->rowaddr - 11) << 24 |		/* ROW */
+	      (m->coladdr - 9) << 20 |		/* COL */
+	      (1 << 19) |			/* Burst Length = 8 for DDR3 */
+	      (i->dsize << 16);			/* DDR data bus size */
+	mmdc0->mdctl = reg;
+
+	/* Step 6: Perform ZQ calibration */
+	reg = (u32)0xa1390001; /* one-time HW ZQ calib */
+	mmdc0->mpzqhwctrl = reg;
+	if (i->dsize > 1)
+		mmdc1->mpzqhwctrl = reg;
+
+	/* Step 7: Enable MMDC with desired chip select */
+	reg = mmdc0->mdctl |
+	      (1 << 31) |			/* SDE_0 for CS0 */
+	      ((i->ncs == 2) ? 1 : 0) << 30;	/* SDE_1 for CS1 */
+	mmdc0->mdctl = reg;
+
+	/* Step 8: Write Mode Registers to Init DDR3 devices */
+	for (cs = 0; cs < i->ncs; cs++) {
+		/* MR2 */
+		reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 |
+		      ((tcwl - 3) & 3) << 3;
+		mmdc0->mdscr = (u32)MR(reg, 2, 3, cs);
+		/* MR3 */
+		mmdc0->mdscr = (u32)MR(0, 3, 3, cs);
+		/* MR1 */
+		reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 |
+		      ((i->rtt_nom & 2) ? 1 : 0) << 6;
+		mmdc0->mdscr = (u32)MR(reg, 1, 3, cs);
+		reg = ((tcl - 1) << 4) |	/* CAS */
+		      (1 << 8)   |		/* DLL Reset */
+		      ((twr - 3) << 9);		/* Write Recovery */
+		/* MR0 */
+		mmdc0->mdscr = (u32)MR(reg, 0, 3, cs);
+		/* ZQ calibration */
+		reg = (1 << 10);
+		mmdc0->mdscr = (u32)MR(reg, 0, 4, cs);
+	}
+
+	/* Step 10: Power down control and self-refresh */
+	reg = (tcke & 0x7) << 16 |
+	      5            << 12 |  /* PWDT_1: 256 cycles */
+	      5            <<  8 |  /* PWDT_0: 256 cycles */
+	      1            <<  6 |  /* BOTH_CS_PD */
+	      (tcksrx & 0x7) << 3 |
+	      (tcksre & 0x7);
+	mmdc0->mdpdc = reg;
+	mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */
+
+	/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
+	mmdc0->mpzqhwctrl = (u32)0xa1390003;
+	if (i->dsize > 1)
+		mmdc1->mpzqhwctrl = (u32)0xa1390003;
+
+	/* Step 12: Configure and activate periodic refresh */
+	reg = (1 << 14) |	/* REF_SEL: Periodic refresh cycles of 32kHz */
+	      (7 << 11);	/* REFR: Refresh Rate - 8 refreshes */
+	mmdc0->mdref = reg;
+
+	/* Step 13: Deassert config request - init complete */
+	mmdc0->mdscr = (u32)0x00000000;
+
+	/* wait for auto-ZQ calibration to complete */
+	mdelay(1);
+}
diff --git a/arch/arm/cpu/armv7/mx6/hab.c b/arch/arm/cpu/armv7/mx6/hab.c
index 51877753652dfdda1880aef7c598a3adb8e23951..f6810a680d9f59493bb041ca79c3050fc5a59f9d 100644
--- a/arch/arm/cpu/armv7/mx6/hab.c
+++ b/arch/arm/cpu/armv7/mx6/hab.c
@@ -7,15 +7,69 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/hab.h>
+#include <asm/arch/sys_proto.h>
 
 /* -------- start of HAB API updates ------------*/
-#define hab_rvt_report_event ((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT)
-#define hab_rvt_report_status ((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS)
-#define hab_rvt_authenticate_image \
-	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE)
-#define hab_rvt_entry ((hab_rvt_entry_t *)HAB_RVT_ENTRY)
-#define hab_rvt_exit ((hab_rvt_exit_t *)HAB_RVT_EXIT)
-#define hab_rvt_clock_init HAB_RVT_CLOCK_INIT
+
+#define hab_rvt_report_event_p					\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) :	\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT_NEW) :	\
+	((hab_rvt_report_event_t *)HAB_RVT_REPORT_EVENT)	\
+)
+
+#define hab_rvt_report_status_p					\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS_NEW) :\
+	((hab_rvt_report_status_t *)HAB_RVT_REPORT_STATUS)	\
+)
+
+#define hab_rvt_authenticate_image_p				\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE_NEW) : \
+	((hab_rvt_authenticate_image_t *)HAB_RVT_AUTHENTICATE_IMAGE)	\
+)
+
+#define hab_rvt_entry_p						\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) :		\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY_NEW) :		\
+	((hab_rvt_entry_t *)HAB_RVT_ENTRY)			\
+)
+
+#define hab_rvt_exit_p						\
+(								\
+	((is_cpu_type(MXC_CPU_MX6Q) ||				\
+	  is_cpu_type(MXC_CPU_MX6D)) &&				\
+	  (soc_rev() >= CHIP_REV_1_5)) ?			\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) :			\
+	(is_cpu_type(MXC_CPU_MX6DL) &&				\
+	 (soc_rev() >= CHIP_REV_1_2)) ?				\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT_NEW) :			\
+	((hab_rvt_exit_t *)HAB_RVT_EXIT)			\
+)
 
 bool is_hab_enabled(void)
 {
@@ -52,6 +106,11 @@ int get_hab_status(void)
 	size_t bytes = sizeof(event_data); /* Event size in bytes */
 	enum hab_config config = 0;
 	enum hab_state state = 0;
+	hab_rvt_report_event_t *hab_rvt_report_event;
+	hab_rvt_report_status_t *hab_rvt_report_status;
+
+	hab_rvt_report_event = hab_rvt_report_event_p;
+	hab_rvt_report_status = hab_rvt_report_status_p;
 
 	if (is_hab_enabled())
 		puts("\nSecure boot enabled\n");
diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
index 6c655773e8ce3758406a874b5a52d5d1267f79f3..25a9d4ce125692c933f646a2deee3feed292b6fd 100644
--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_SYS_I2C_MXC) += i2c-mxv7.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6 mxs))
 obj-y	+= misc.o
+obj-$(CONFIG_SPL_BUILD)	+= spl.o
 endif
 ifeq ($(SOC),$(filter $(SOC),mx6))
 obj-$(CONFIG_CMD_SATA) += sata.o
diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c
index a77c4decc960eb2b08767af005d69881d58cb41f..5a09107c5ab3228441a7cd5de8aa7f375a4d3e6d 100644
--- a/arch/arm/imx-common/cpu.c
+++ b/arch/arm/imx-common/cpu.c
@@ -58,6 +58,7 @@ char *get_reset_cause(void)
 static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9};
 static const unsigned char bank_lookup[] = {3, 2};
 
+/* these MMDC registers are common to the IMX53 and IMX6 */
 struct esd_mmdc_regs {
 	uint32_t	ctl;
 	uint32_t	pdc;
@@ -66,15 +67,6 @@ struct esd_mmdc_regs {
 	uint32_t	cfg1;
 	uint32_t	cfg2;
 	uint32_t	misc;
-	uint32_t	scr;
-	uint32_t	ref;
-	uint32_t	rsvd1;
-	uint32_t	rsvd2;
-	uint32_t	rwd;
-	uint32_t	or;
-	uint32_t	mrr;
-	uint32_t	cfg3lp;
-	uint32_t	mr4;
 };
 
 #define ESD_MMDC_CTL_GET_ROW(mdctl)	((ctl >> 24) & 7)
@@ -83,6 +75,12 @@ struct esd_mmdc_regs {
 #define ESD_MMDC_CTL_GET_CS1(mdctl)	((ctl >> 30) & 1)
 #define ESD_MMDC_MISC_GET_BANK(mdmisc)	((misc >> 5) & 1)
 
+/*
+ * imx_ddr_size - return size in bytes of DRAM according MMDC config
+ * The MMDC MDCTL register holds the number of bits for row, col, and data
+ * width and the MMDC MDMISC register holds the number of banks. Combine
+ * all these bits to determine the meme size the MMDC has been configured for
+ */
 unsigned imx_ddr_size(void)
 {
 	struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE;
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index 6e46ea8dcdeb0d762626faec9c8e3d649e9f9b17..22cd11aa04867c47c8d7356683889324d8ad6a25 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -11,6 +11,9 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#if !defined(CONFIG_MX25) && !defined(CONFIG_VF610)
+#include <asm/arch/sys_proto.h>
+#endif
 #include <asm/imx-common/iomux-v3.h>
 
 static void *base = (void *)IOMUXC_BASE_ADDR;
@@ -54,12 +57,23 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
 #endif
 }
 
+/* configures a list of pads within declared with IOMUX_PADS macro */
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 				      unsigned count)
 {
 	iomux_v3_cfg_t const *p = pad_list;
+	int stride;
 	int i;
 
-	for (i = 0; i < count; i++)
-		imx_iomux_v3_setup_pad(*p++);
+#if defined(CONFIG_MX6QDL)
+	stride = 2;
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		p += 1;
+#else
+	stride = 1;
+#endif
+	for (i = 0; i < count; i++) {
+		imx_iomux_v3_setup_pad(*p);
+		p += stride;
+	}
 }
diff --git a/arch/arm/imx-common/sata.c b/arch/arm/imx-common/sata.c
index 2e694866e051948beb2302080bfee5cbd6ced8c7..c10dd28f61af5502fc97035ff094bdf5d5784e4b 100644
--- a/arch/arm/imx-common/sata.c
+++ b/arch/arm/imx-common/sata.c
@@ -8,13 +8,18 @@
 #include <asm/arch/iomux.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 
 int setup_sata(void)
 {
 	struct iomuxc_base_regs *const iomuxc_regs
 		= (struct iomuxc_base_regs *)IOMUXC_BASE_ADDR;
+	int ret;
 
-	int ret = enable_sata_clock();
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		return 1;
+
+	ret = enable_sata_clock();
 	if (ret)
 		return ret;
 
diff --git a/arch/arm/imx-common/spl.c b/arch/arm/imx-common/spl.c
new file mode 100644
index 0000000000000000000000000000000000000000..9a02a644bc48997f785d37ee984d6fd24493e663
--- /dev/null
+++ b/arch/arm/imx-common/spl.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/spl.h>
+#include <spl.h>
+
+#if defined(CONFIG_MX6)
+/* determine boot device from SRC_SBMR1 register (BOOT_CFG[4:1]) */
+u32 spl_boot_device(void)
+{
+	struct src *psrc = (struct src *)SRC_BASE_ADDR;
+	unsigned reg = readl(&psrc->sbmr1);
+
+	/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
+	switch ((reg & 0x000000FF) >> 4) {
+	 /* EIM: See 8.5.1, Table 8-9 */
+	case 0x0:
+		/* BOOT_CFG1[3]: NOR/OneNAND Selection */
+		if ((reg & 0x00000008) >> 3)
+			return BOOT_DEVICE_ONENAND;
+		else
+			return BOOT_DEVICE_NOR;
+		break;
+	/* SATA: See 8.5.4, Table 8-20 */
+	case 0x2:
+		return BOOT_DEVICE_SATA;
+	/* Serial ROM: See 8.5.5.1, Table 8-22 */
+	case 0x3:
+		/* BOOT_CFG4[2:0] */
+		switch ((reg & 0x07000000) >> 24) {
+		case 0x0 ... 0x4:
+			return BOOT_DEVICE_SPI;
+		case 0x5 ... 0x7:
+			return BOOT_DEVICE_I2C;
+		}
+		break;
+	/* SD/eSD: 8.5.3, Table 8-15  */
+	case 0x4:
+	case 0x5:
+		return BOOT_DEVICE_MMC1;
+	/* MMC/eMMC: 8.5.3 */
+	case 0x6:
+	case 0x7:
+		return BOOT_DEVICE_MMC1;
+	/* NAND Flash: 8.5.2 */
+	case 0x8 ... 0xf:
+		return BOOT_DEVICE_NAND;
+	}
+	return BOOT_DEVICE_NONE;
+}
+#endif
+
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
+u32 spl_boot_mode(void)
+{
+	switch (spl_boot_device()) {
+	/* for MMC return either RAW or FAT mode */
+	case BOOT_DEVICE_MMC1:
+	case BOOT_DEVICE_MMC2:
+#ifdef CONFIG_SPL_FAT_SUPPORT
+		return MMCSD_MODE_FAT;
+#else
+		return MMCSD_MODE_RAW;
+#endif
+		break;
+	default:
+		puts("spl: ERROR:  unsupported device\n");
+		hang();
+	}
+}
+#endif
diff --git a/arch/arm/include/asm/arch-at91/spl.h b/arch/arm/include/asm/arch-at91/spl.h
deleted file mode 100644
index d8a87daa4a3b575d7cdb74ca856ac4ccd7f43814..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-at91/spl.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2013 Atmel Corporation
- *		      Bo Shen <voice.shen@atmel.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-enum {
-	BOOT_DEVICE_NONE,
-#ifdef CONFIG_SYS_USE_MMC
-	BOOT_DEVICE_MMC1,
-	BOOT_DEVICE_MMC2,
-	BOOT_DEVICE_MMC2_2,
-#elif CONFIG_SYS_USE_NANDFLASH
-	BOOT_DEVICE_NAND,
-#elif CONFIG_SYS_USE_SERIALFLASH
-	BOOT_DEVICE_SPI,
-#endif
-};
-
-#endif
diff --git a/arch/arm/include/asm/arch-davinci/spl.h b/arch/arm/include/asm/arch-davinci/spl.h
deleted file mode 100644
index 5afe0d4ba53fa30bfde8f54fb531ed8b05f08e32..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-davinci/spl.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_NAND	1
-#define BOOT_DEVICE_SPI		2
-#define BOOT_DEVICE_MMC1	3
-#define BOOT_DEVICE_MMC2	4	/* dummy */
-#define BOOT_DEVICE_MMC2_2	5	/* dummy */
-
-#endif
diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h
deleted file mode 100644
index d0efec21ab64d0072d56d72cfd7bafb0ea4e479d..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-mx35/spl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * (C) Copyright 2012
- * Texas Instruments, <www.ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_XIP		1
-#define BOOT_DEVICE_XIPWAIT	2
-#define BOOT_DEVICE_NAND	3
-#define BOOT_DEVICE_ONENAND	4
-#define BOOT_DEVICE_MMC1	5
-#define BOOT_DEVICE_MMC2	6
-#define BOOT_DEVICE_MMC2_2	7
-#define BOOT_DEVICE_NOR		8
-#define BOOT_DEVICE_I2C		9
-#define BOOT_DEVICE_SPI		10
-
-#endif
diff --git a/arch/arm/include/asm/arch-mx5/spl.h b/arch/arm/include/asm/arch-mx5/spl.h
deleted file mode 100644
index 20c6cae93893f1aea89b49be891ddc6e9092e24b..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-mx5/spl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __ASM_ARCH_SPL_H__
-#define __ASM_ARCH_SPL_H__
-
-#define BOOT_DEVICE_NONE	0
-#define BOOT_DEVICE_NAND	1
-
-#endif	/* __ASM_ARCH_SPL_H__ */
diff --git a/arch/arm/include/asm/arch-mx6/hab.h b/arch/arm/include/asm/arch-mx6/hab.h
index d724f206f06b65a9ecb0c3673865494d82f42c1e..1f12695f67f863994bff9ddefb8a74c691faf4eb 100644
--- a/arch/arm/include/asm/arch-mx6/hab.h
+++ b/arch/arm/include/asm/arch-mx6/hab.h
@@ -53,12 +53,17 @@ typedef void *hab_rvt_authenticate_image_t(uint8_t, ptrdiff_t,
 		void **, size_t *, hab_loader_callback_f_t);
 typedef void hapi_clock_init_t(void);
 
-#define HAB_RVT_REPORT_EVENT (*(uint32_t *)0x000000B4)
-#define HAB_RVT_REPORT_STATUS (*(uint32_t *)0x000000B8)
-#define HAB_RVT_AUTHENTICATE_IMAGE (*(uint32_t *)0x000000A4)
-#define HAB_RVT_ENTRY (*(uint32_t *)0x00000098)
-#define HAB_RVT_EXIT (*(uint32_t *)0x0000009C)
-#define HAB_RVT_CLOCK_INIT ((hapi_clock_init_t *)0x0000024D)
+#define HAB_RVT_REPORT_EVENT                   (*(uint32_t *)0x000000B4)
+#define HAB_RVT_REPORT_STATUS                  (*(uint32_t *)0x000000B8)
+#define HAB_RVT_AUTHENTICATE_IMAGE             (*(uint32_t *)0x000000A4)
+#define HAB_RVT_ENTRY                          (*(uint32_t *)0x00000098)
+#define HAB_RVT_EXIT                           (*(uint32_t *)0x0000009C)
+
+#define HAB_RVT_REPORT_EVENT_NEW               (*(uint32_t *)0x000000B8)
+#define HAB_RVT_REPORT_STATUS_NEW              (*(uint32_t *)0x000000BC)
+#define HAB_RVT_AUTHENTICATE_IMAGE_NEW         (*(uint32_t *)0x000000A8)
+#define HAB_RVT_ENTRY_NEW                      (*(uint32_t *)0x0000009C)
+#define HAB_RVT_EXIT_NEW                       (*(uint32_t *)0x000000A0)
 
 #define HAB_CID_ROM 0 /**< ROM Caller ID */
 #define HAB_CID_UBOOT 1 /**< UBOOT Caller ID*/
diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h
index 1f19727b581bd7c08b6141ec4d37bac4d8fb6c3c..a69a7530c37b9aff9806af489f3f6cd76ed1061b 100644
--- a/arch/arm/include/asm/arch-mx6/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx6/imx-regs.h
@@ -217,6 +217,8 @@
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
 
 #define CHIP_REV_1_0                 0x10
+#define CHIP_REV_1_2                 0x12
+#define CHIP_REV_1_5                 0x15
 #define IRAM_SIZE                    0x00040000
 #define FEC_QUIRK_ENET_MAC
 
diff --git a/arch/arm/include/asm/arch-mx6/iomux.h b/arch/arm/include/asm/arch-mx6/iomux.h
index f9ee0d9839c088c13f18af2968118c5fa839ee87..6a4a6321995b8832bf02544eaa71b0dbb9722901 100644
--- a/arch/arm/include/asm/arch-mx6/iomux.h
+++ b/arch/arm/include/asm/arch-mx6/iomux.h
@@ -39,7 +39,7 @@
 #define IOMUXC_GPR12_LOS_LEVEL_MASK		(0x1f << 4)
 #define IOMUXC_GPR12_APPS_LTSSM_ENABLE		(1 << 10)
 #define IOMUXC_GPR12_DEVICE_TYPE_EP		(0x0 << 12)
-#define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x2 << 12)
+#define IOMUXC_GPR12_DEVICE_TYPE_RC		(0x4 << 12)
 #define IOMUXC_GPR12_DEVICE_TYPE_MASK		(0xf << 12)
 
 /*
diff --git a/arch/arm/include/asm/arch-mx6/mx6-ddr.h b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
index 43d377af355a3d31d3b24f35b60e693adf33eecd..d544d2e7086009fc0d083816b6233610af556221 100644
--- a/arch/arm/include/asm/arch-mx6/mx6-ddr.h
+++ b/arch/arm/include/asm/arch-mx6/mx6-ddr.h
@@ -6,6 +6,7 @@
 #ifndef __ASM_ARCH_MX6_DDR_H__
 #define __ASM_ARCH_MX6_DDR_H__
 
+#ifndef CONFIG_SPL_BUILD
 #ifdef CONFIG_MX6Q
 #include "mx6q-ddr.h"
 #else
@@ -15,6 +16,236 @@
 #error "Please select cpu"
 #endif	/* CONFIG_MX6DL or CONFIG_MX6S */
 #endif	/* CONFIG_MX6Q */
+#else
+
+/* MMDC P0/P1 Registers */
+struct mmdc_p_regs {
+	u32 mdctl;
+	u32 mdpdc;
+	u32 mdotc;
+	u32 mdcfg0;
+	u32 mdcfg1;
+	u32 mdcfg2;
+	u32 mdmisc;
+	u32 mdscr;
+	u32 mdref;
+	u32 res1[2];
+	u32 mdrwd;
+	u32 mdor;
+	u32 res2[3];
+	u32 mdasp;
+	u32 res3[240];
+	u32 mapsr;
+	u32 res4[254];
+	u32 mpzqhwctrl;
+	u32 res5[2];
+	u32 mpwldectrl0;
+	u32 mpwldectrl1;
+	u32 res6;
+	u32 mpodtctrl;
+	u32 mprddqby0dl;
+	u32 mprddqby1dl;
+	u32 mprddqby2dl;
+	u32 mprddqby3dl;
+	u32 res7[4];
+	u32 mpdgctrl0;
+	u32 mpdgctrl1;
+	u32 res8;
+	u32 mprddlctl;
+	u32 res9;
+	u32 mpwrdlctl;
+	u32 res10[25];
+	u32 mpmur0;
+};
+
+/*
+ * MMDC iomux registers (pinctl/padctl) - (different for IMX6DQ vs IMX6SDL)
+ */
+#define MX6DQ_IOM_DDR_BASE      0x020e0500
+struct mx6dq_iomux_ddr_regs {
+	u32 res1[3];
+	u32 dram_sdqs5;
+	u32 dram_dqm5;
+	u32 dram_dqm4;
+	u32 dram_sdqs4;
+	u32 dram_sdqs3;
+	u32 dram_dqm3;
+	u32 dram_sdqs2;
+	u32 dram_dqm2;
+	u32 res2[16];
+	u32 dram_cas;
+	u32 res3[2];
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res4[2];
+	u32 dram_sdclk_0;
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdclk_1;
+	u32 dram_sdcke1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 res5;
+	u32 dram_sdqs0;
+	u32 dram_dqm0;
+	u32 dram_sdqs1;
+	u32 dram_dqm1;
+	u32 dram_sdqs6;
+	u32 dram_dqm6;
+	u32 dram_sdqs7;
+	u32 dram_dqm7;
+};
+
+#define MX6DQ_IOM_GRP_BASE      0x020e0700
+struct mx6dq_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 res2;
+	u32 grp_ddrpke;
+	u32 res3[6];
+	u32 grp_ddrmode;
+	u32 res4[3];
+	u32 grp_b0ds;
+	u32 grp_b1ds;
+	u32 grp_ctlds;
+	u32 res5;
+	u32 grp_b2ds;
+	u32 grp_ddr_type;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 grp_b6ds;
+};
+
+#define MX6SDL_IOM_DDR_BASE     0x020e0400
+struct mx6sdl_iomux_ddr_regs {
+	u32 res1[25];
+	u32 dram_cas;
+	u32 res2[2];
+	u32 dram_dqm0;
+	u32 dram_dqm1;
+	u32 dram_dqm2;
+	u32 dram_dqm3;
+	u32 dram_dqm4;
+	u32 dram_dqm5;
+	u32 dram_dqm6;
+	u32 dram_dqm7;
+	u32 dram_ras;
+	u32 dram_reset;
+	u32 res3[2];
+	u32 dram_sdba2;
+	u32 dram_sdcke0;
+	u32 dram_sdcke1;
+	u32 dram_sdclk_0;
+	u32 dram_sdclk_1;
+	u32 dram_sdodt0;
+	u32 dram_sdodt1;
+	u32 dram_sdqs0;
+	u32 dram_sdqs1;
+	u32 dram_sdqs2;
+	u32 dram_sdqs3;
+	u32 dram_sdqs4;
+	u32 dram_sdqs5;
+	u32 dram_sdqs6;
+	u32 dram_sdqs7;
+};
+
+#define MX6SDL_IOM_GRP_BASE     0x020e0700
+struct mx6sdl_iomux_grp_regs {
+	u32 res1[18];
+	u32 grp_b7ds;
+	u32 grp_addds;
+	u32 grp_ddrmode_ctl;
+	u32 grp_ddrpke;
+	u32 res2[2];
+	u32 grp_ddrmode;
+	u32 grp_b0ds;
+	u32 res3;
+	u32 grp_ctlds;
+	u32 grp_b1ds;
+	u32 grp_ddr_type;
+	u32 grp_b2ds;
+	u32 grp_b3ds;
+	u32 grp_b4ds;
+	u32 grp_b5ds;
+	u32 res4;
+	u32 grp_b6ds;
+};
+
+/* Device Information: Varies per DDR3 part number and speed grade */
+struct mx6_ddr3_cfg {
+	u16 mem_speed;	/* ie 1600 for DDR3-1600 (800,1066,1333,1600) */
+	u8 density;	/* chip density (Gb) (1,2,4,8) */
+	u8 width;	/* bus width (bits) (4,8,16) */
+	u8 banks;	/* number of banks */
+	u8 rowaddr;	/* row address bits (11-16)*/
+	u8 coladdr;	/* col address bits (9-12) */
+	u8 pagesz;	/* page size (K) (1-2) */
+	u16 trcd;	/* tRCD=tRP=CL (ns*100) */
+	u16 trcmin;	/* tRC min (ns*100) */
+	u16 trasmin;	/* tRAS min (ns*100) */
+	u8 SRT;		/* self-refresh temperature: 0=normal, 1=extended */
+};
+
+/* System Information: Varies per board design, layout, and term choices */
+struct mx6_ddr_sysinfo {
+	u8 dsize;	/* size of bus (in dwords: 0=16bit,1=32bit,2=64bit) */
+	u8 cs_density;	/* density per chip select (Gb) */
+	u8 ncs;		/* number chip selects used (1|2) */
+	char cs1_mirror;/* enable address mirror (0|1) */
+	char bi_on;	/* Bank interleaving enable */
+	u8 rtt_nom;	/* Rtt_Nom (DDR3_RTT_*) */
+	u8 rtt_wr;	/* Rtt_Wr (DDR3_RTT_*) */
+	u8 ralat;	/* Read Additional Latency (0-7) */
+	u8 walat;	/* Write Additional Latency (0-3) */
+	u8 mif3_mode;	/* Command prediction working mode */
+	u8 rst_to_cke;	/* Time from SDE enable to CKE rise */
+	u8 sde_to_rst;	/* Time from SDE enable until DDR reset# is high */
+};
+
+/*
+ * Board specific calibration:
+ *   This includes write leveling calibration values as well as DQS gating
+ *   and read/write delays. These values are board/layout/device specific.
+ *   Freescale recommends using the i.MX6 DDR Stress Test Tool V1.0.2
+ *   (DOC-96412) to determine these values over a range of boards and
+ *   temperatures.
+ */
+struct mx6_mmdc_calibration {
+	/* write leveling calibration */
+	u32 p0_mpwldectrl0;
+	u32 p0_mpwldectrl1;
+	u32 p1_mpwldectrl0;
+	u32 p1_mpwldectrl1;
+	/* read DQS gating */
+	u32 p0_mpdgctrl0;
+	u32 p0_mpdgctrl1;
+	u32 p1_mpdgctrl0;
+	u32 p1_mpdgctrl1;
+	/* read delay */
+	u32 p0_mprddlctl;
+	u32 p1_mprddlctl;
+	/* write delay */
+	u32 p0_mpwrdlctl;
+	u32 p1_mpwrdlctl;
+};
+
+/* configure iomux (pinctl/padctl) */
+void mx6dq_dram_iocfg(unsigned width,
+		      const struct mx6dq_iomux_ddr_regs *,
+		      const struct mx6dq_iomux_grp_regs *);
+void mx6sdl_dram_iocfg(unsigned width,
+		       const struct mx6sdl_iomux_ddr_regs *,
+		       const struct mx6sdl_iomux_grp_regs *);
+
+/* configure mx6 mmdc registers */
+void mx6_dram_cfg(const struct mx6_ddr_sysinfo *,
+		  const struct mx6_mmdc_calibration *,
+		  const struct mx6_ddr3_cfg *);
+
+#endif /* CONFIG_SPL_BUILD */
 
 #define MX6_MMDC_P0_MDCTL	0x021b0000
 #define MX6_MMDC_P0_MDPDC	0x021b0004
diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h
index 38851a135c8a5bf4686226ed715cf3d3ad791e4d..42d30f50212f62430357740a3eeb6b167e412a4b 100644
--- a/arch/arm/include/asm/arch-mx6/sys_proto.h
+++ b/arch/arm/include/asm/arch-mx6/sys_proto.h
@@ -11,7 +11,9 @@
 #include <asm/imx-common/regs-common.h>
 #include "../arch-imx/cpu.h"
 
-#define is_soc_rev(rev)	((get_cpu_rev() & 0xFF) - rev)
+#define soc_rev() (get_cpu_rev() & 0xFF)
+#define is_soc_rev(rev)        (soc_rev() - rev)
+
 u32 get_cpu_rev(void);
 
 /* returns MXC_CPU_ value */
diff --git a/arch/arm/include/asm/arch-tegra114/spl.h b/arch/arm/include/asm/arch-tegra114/spl.h
deleted file mode 100644
index ebb16fe1dd5b671309ae50e80b62513633697807..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-tegra114/spl.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (c) 2010-2013, NVIDIA CORPORATION.  All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/arch-tegra124/spl.h b/arch/arm/include/asm/arch-tegra124/spl.h
deleted file mode 100644
index e2663954bf2fefb4c60e2ca5929d2630d4551446..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-tegra124/spl.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * (C) Copyright 2010-2013
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:     GPL-2.0+
- */
-
-#ifndef _ASM_ARCH_SPL_H_
-#define _ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM 1
-
-#endif /* _ASM_ARCH_SPL_H_ */
diff --git a/arch/arm/include/asm/arch-tegra20/spl.h b/arch/arm/include/asm/arch-tegra20/spl.h
deleted file mode 100644
index 8953b00a9fb2f107baeed88c83675b5abcbfa4a1..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-tegra20/spl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/arch-tegra30/spl.h b/arch/arm/include/asm/arch-tegra30/spl.h
deleted file mode 100644
index 8953b00a9fb2f107baeed88c83675b5abcbfa4a1..0000000000000000000000000000000000000000
--- a/arch/arm/include/asm/arch-tegra30/spl.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * (C) Copyright 2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-#ifndef	_ASM_ARCH_SPL_H_
-#define	_ASM_ARCH_SPL_H_
-
-#define BOOT_DEVICE_RAM         1
-
-#endif
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index ff45618e45521f2dc74b085981bd217ef43233c5..e91d4acb1872f976aa5441ae1c19ef03897810ca 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -177,4 +177,29 @@ void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,
 				     unsigned count);
 
+/* macros for declaring and using pinmux array */
+#if defined(CONFIG_MX6QDL)
+#define IOMUX_PADS(x) (MX6Q_##x), (MX6DL_##x)
+#define SETUP_IOMUX_PAD(def)					\
+if (is_cpu_type(MXC_CPU_MX6Q)) {				\
+	imx_iomux_v3_setup_pad(MX6Q_##def);			\
+} else {							\
+	imx_iomux_v3_setup_pad(MX6DL_##def);			\
+}
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x)/2)
+#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
+#define IOMUX_PADS(x) MX6Q_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6Q_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#else
+#define IOMUX_PADS(x) MX6DL_##x
+#define SETUP_IOMUX_PAD(def)					\
+	imx_iomux_v3_setup_pad(MX6DL_##def);
+#define SETUP_IOMUX_PADS(x)					\
+	imx_iomux_v3_setup_multiple_pads(x, ARRAY_SIZE(x))
+#endif
+
 #endif	/* __MACH_IOMUX_V3_H__*/
diff --git a/arch/arm/include/asm/spl.h b/arch/arm/include/asm/spl.h
index 90e5a9dde1d64fa599f9f9a91b33a81a4d5b743d..18a319de2f6ab25c146f1d8f3d35f1f08934f6b8 100644
--- a/arch/arm/include/asm/spl.h
+++ b/arch/arm/include/asm/spl.h
@@ -7,9 +7,29 @@
 #ifndef	_ASM_SPL_H_
 #define	_ASM_SPL_H_
 
+#if defined(CONFIG_OMAP) || defined(CONFIG_SOCFPGA) || defined(CONFIG_ZYNQ) \
+	|| defined(CONFIG_EXYNOS4) || defined(CONFIG_EXYNOS5) \
+	|| defined(CONFIG_EXYNOS4210)
 /* Platform-specific defines */
 #include <asm/arch/spl.h>
 
+#else
+enum {
+	BOOT_DEVICE_RAM,
+	BOOT_DEVICE_MMC1,
+	BOOT_DEVICE_MMC2,
+	BOOT_DEVICE_MMC2_2,
+	BOOT_DEVICE_NAND,
+	BOOT_DEVICE_ONENAND,
+	BOOT_DEVICE_NOR,
+	BOOT_DEVICE_UART,
+	BOOT_DEVICE_SPI,
+	BOOT_DEVICE_SATA,
+	BOOT_DEVICE_I2C,
+	BOOT_DEVICE_NONE
+};
+#endif
+
 /* Linker symbols. */
 extern char __bss_start[], __bss_end[];
 
diff --git a/board/denx/m53evk/m53evk.c b/board/denx/m53evk/m53evk.c
index 74f95011ad790cb554e2312ba9461e644005fa8c..5dd6cddd0297c8b766b7b870f3c9676a15a112f4 100644
--- a/board/denx/m53evk/m53evk.c
+++ b/board/denx/m53evk/m53evk.c
@@ -14,7 +14,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/iomux-mx53.h>
 #include <asm/imx-common/mx5_video.h>
-#include <asm/arch/spl.h>
+#include <asm/spl.h>
 #include <asm/errno.h>
 #include <netdev.h>
 #include <i2c.h>
diff --git a/board/freescale/mx28evk/README b/board/freescale/mx28evk/README
index 0389a1d86c79d66d0d9c3a40a814890ef4eaf93a..958ebc679106a52810506c506b7d3e6942e62420 100644
--- a/board/freescale/mx28evk/README
+++ b/board/freescale/mx28evk/README
@@ -23,11 +23,19 @@ To boot MX28EVK from an SD card, set the boot mode DIP switches as:
    * VDD 5V: To the left (off)
    * Hold Button: Down (off)
 
+To boot MX28EVK from SPI NOR flash, set the boot mode DIP switches as:
+
+   * Boot Mode Select: 0 0 1 0 (Boot from SSP2)
+   * JTAG PSWITCH RESET: To the right (reset disabled)
+   * Battery Source: Down
+   * Wall 5V: Up
+   * VDD 5V: To the left (off)
+   * Hold Button: Down (off)
 
 Environment Storage
 -------------------
 
-There are two targets for mx28evk:
+There are three targets for mx28evk:
 
 "make mx28evk_config"		- store environment variables into MMC
 
@@ -35,12 +43,20 @@ or
 
 "make mx28evk_nand_config"	- store environment variables into NAND flash
 
+or
+
+"make mx28evk_spi_config"       - store enviroment variables into SPI NOR flash
+
 Choose the target accordingly.
 
 Note: The mx28evk board does not come with a NAND flash populated from the
 factory. It comes with an empty slot (U23), which allows the insertion of a
 48-pin TSOP flash device.
 
-Follow the instructions from doc/README.mxs to generate a bootable SD card.
+mx28evk does not come with SPI NOR flash populated from the factory either.
+It is possible to solder a SOIC memory on U49 or use a DIP8 on J89.
+To get SPI communication to work R320, R321,R322 and C178 need to be populated.
+Look in the schematics for the proper component values.
 
-Insert the SD card in slot 0, power up the board and U-boot will boot.
+Follow the instructions from doc/README.mxs to generate a bootable SD card or
+to generate a binary to be flashed into SPI NOR.
diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg b/board/freescale/mx6qsabreauto/mx6dl.cfg
new file mode 100644
index 0000000000000000000000000000000000000000..89078e565323e87ac5746168f65f85627e0c3ad8
--- /dev/null
+++ b/board/freescale/mx6qsabreauto/mx6dl.cfg
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ * Jason Liu <r64343@freescale.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+DATA 4 0x020e0774 0x000C0000
+DATA 4 0x020e0754 0x00000000
+DATA 4 0x020e04ac 0x00000030
+DATA 4 0x020e04b0 0x00000030
+DATA 4 0x020e0464 0x00000030
+DATA 4 0x020e0490 0x00000030
+DATA 4 0x020e074c 0x00000030
+DATA 4 0x020e0494 0x00000030
+DATA 4 0x020e04a0 0x00000000
+DATA 4 0x020e04b4 0x00000030
+DATA 4 0x020e04b8 0x00000030
+DATA 4 0x020e076c 0x00000030
+DATA 4 0x020e0750 0x00020000
+DATA 4 0x020e04bc 0x00000028
+DATA 4 0x020e04c0 0x00000028
+DATA 4 0x020e04c4 0x00000028
+DATA 4 0x020e04c8 0x00000028
+DATA 4 0x020e04cc 0x00000028
+DATA 4 0x020e04d0 0x00000028
+DATA 4 0x020e04d4 0x00000028
+DATA 4 0x020e04d8 0x00000028
+DATA 4 0x020e0760 0x00020000
+DATA 4 0x020e0764 0x00000028
+DATA 4 0x020e0770 0x00000028
+DATA 4 0x020e0778 0x00000028
+DATA 4 0x020e077c 0x00000028
+DATA 4 0x020e0780 0x00000028
+DATA 4 0x020e0784 0x00000028
+DATA 4 0x020e078c 0x00000028
+DATA 4 0x020e0748 0x00000028
+DATA 4 0x020e0470 0x00000028
+DATA 4 0x020e0474 0x00000028
+DATA 4 0x020e0478 0x00000028
+DATA 4 0x020e047c 0x00000028
+DATA 4 0x020e0480 0x00000028
+DATA 4 0x020e0484 0x00000028
+DATA 4 0x020e0488 0x00000028
+DATA 4 0x020e048c 0x00000028
+DATA 4 0x021b0800 0xa1390003
+DATA 4 0x021b080c 0x001F001F
+DATA 4 0x021b0810 0x001F001F
+DATA 4 0x021b480c 0x001F001F
+DATA 4 0x021b4810 0x001F001F
+DATA 4 0x021b083c 0x42190217
+DATA 4 0x021b0840 0x017B017B
+DATA 4 0x021b483c 0x4176017B
+DATA 4 0x021b4840 0x015F016C
+DATA 4 0x021b0848 0x4C4C4D4C
+DATA 4 0x021b4848 0x4A4D4C48
+DATA 4 0x021b0850 0x3F3F3F40
+DATA 4 0x021b4850 0x3538382E
+DATA 4 0x021b081c 0x33333333
+DATA 4 0x021b0820 0x33333333
+DATA 4 0x021b0824 0x33333333
+DATA 4 0x021b0828 0x33333333
+DATA 4 0x021b481c 0x33333333
+DATA 4 0x021b4820 0x33333333
+DATA 4 0x021b4824 0x33333333
+DATA 4 0x021b4828 0x33333333
+DATA 4 0x021b08b8 0x00000800
+DATA 4 0x021b48b8 0x00000800
+DATA 4 0x021b0004 0x00020025
+DATA 4 0x021b0008 0x00333030
+DATA 4 0x021b000c 0x676B5313
+DATA 4 0x021b0010 0xB66E8B63
+DATA 4 0x021b0014 0x01FF00DB
+DATA 4 0x021b0018 0x00001740
+DATA 4 0x021b001c 0x00008000
+DATA 4 0x021b002c 0x000026d2
+DATA 4 0x021b0030 0x006B1023
+DATA 4 0x021b0040 0x00000047
+DATA 4 0x021b0000 0x841A0000
+DATA 4 0x021b001c 0x04008032
+DATA 4 0x021b001c 0x00008033
+DATA 4 0x021b001c 0x00048031
+DATA 4 0x021b001c 0x05208030
+DATA 4 0x021b001c 0x04008040
+DATA 4 0x021b0020 0x00005800
+DATA 4 0x021b0818 0x00011117
+DATA 4 0x021b4818 0x00011117
+DATA 4 0x021b0004 0x00025565
+DATA 4 0x021b0404 0x00011006
+DATA 4 0x021b001c 0x00000000
+
+/* set the default clock gate to save power */
+DATA 4 0x020c4068 0x00C03F3F
+DATA 4 0x020c406c 0x0030FC03
+DATA 4 0x020c4070 0x0FFFC000
+DATA 4 0x020c4074 0x3FF00000
+DATA 4 0x020c4078 0xFFFFF300
+DATA 4 0x020c407c 0x0F0000C3
+DATA 4 0x020c4080 0x00000FFF
+
+/* enable AXI cache for VDOA/VPU/IPU */
+DATA 4 0x020e0010 0xF00000CF
+/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
+DATA 4 0x020e0018 0x007F007F
+DATA 4 0x020e001c 0x007F007F
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 3e314daec2f431d7cb2900a508b7264713e3dd23..d7c4b4f148cba41f4e8a499f9a4a4bd445d70311 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -12,6 +12,7 @@
 #include <asm/arch/mx6-pins.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>
+#include <asm/imx-common/mxc_i2c.h>
 #include <asm/imx-common/iomux-v3.h>
 #include <asm/imx-common/boot_mode.h>
 #include <asm/imx-common/video.h>
@@ -23,6 +24,9 @@
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
+#include <i2c.h>
+#include <power/pmic.h>
+#include <power/pfuze100_pmic.h>
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
@@ -39,6 +43,14 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
 		      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
+#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |			\
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |	\
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define I2C_PMIC	1
+
+#define I2C_PAD MUX_PAD_CTRL(I2C_PAD_CTRL)
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -129,6 +141,19 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static struct i2c_pads_info i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | I2C_PAD,
+		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | I2C_PAD,
+		.gp = IMX_GPIO_NR(4, 12)
+	},
+	.sda = {
+		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | I2C_PAD,
+		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | I2C_PAD,
+		.gp = IMX_GPIO_NR(4, 13)
+	}
+};
+
 static void setup_spi(void)
 {
 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
@@ -426,6 +451,64 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
+	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
+
+	return 0;
+}
+
+static int pfuze_init(void)
+{
+	struct pmic *p;
+	int ret;
+	unsigned int reg;
+
+	ret = power_pfuze100_init(I2C_PMIC);
+	if (ret)
+		return ret;
+
+	p = pmic_get("PFUZE100_PMIC");
+	ret = pmic_probe(p);
+	if (ret)
+		return ret;
+
+	pmic_reg_read(p, PFUZE100_DEVICEID, &reg);
+	printf("PMIC:  PFUZE100 ID=0x%02x\n", reg);
+
+	/* Increase VGEN3 from 2.5 to 2.8V */
+	pmic_reg_read(p, PFUZE100_VGEN3VOL, &reg);
+	reg &= ~0xf;
+	reg |= 0xa;
+	pmic_reg_write(p, PFUZE100_VGEN3VOL, reg);
+
+	/* Increase VGEN5 from 2.8 to 3V */
+	pmic_reg_read(p, PFUZE100_VGEN5VOL, &reg);
+	reg &= ~0xf;
+	reg |= 0xc;
+	pmic_reg_write(p, PFUZE100_VGEN5VOL, reg);
+
+	/* Set SW1AB stanby volage to 0.975V */
+	pmic_reg_read(p, PFUZE100_SW1ABSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
+
+	/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+
+	/* Set SW1C standby voltage to 0.975V */
+	pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
+	reg &= ~0x3f;
+	reg |= 0x1b;
+	pmic_reg_write(p, PFUZE100_SW1CSTBY, reg);
+
+	/* Set SW1C/VDDSOC step ramp up time from 16us to 4us/25mV */
+	pmic_reg_read(p, PFUZE100_SW1CCONF, &reg);
+	reg &= ~0xc0;
+	reg |= 0x40;
+	pmic_reg_write(p, PFUZE100_SW1CCONF, reg);
 
 	return 0;
 }
@@ -446,6 +529,7 @@ int board_late_init(void)
 #ifdef CONFIG_CMD_BMODE
 	add_board_boot_modes(board_boot_modes);
 #endif
+	pfuze_init();
 
 	return 0;
 }
diff --git a/board/gateworks/gw_ventana/Makefile b/board/gateworks/gw_ventana/Makefile
index e8dab89c6567df598dfb17be7adf1ab33cdf66b1..33a1788f2021b16c8869604cdf804c6e41d97e52 100644
--- a/board/gateworks/gw_ventana/Makefile
+++ b/board/gateworks/gw_ventana/Makefile
@@ -6,5 +6,6 @@
 # SPDX-License-Identifier:  GPL-2.0+
 #
 
-obj-y  := gw_ventana.o gsc.o
+obj-y  := gw_ventana.o gsc.o eeprom.o
+obj-$(CONFIG_SPL_BUILD) += gw_ventana_spl.o
 
diff --git a/board/gateworks/gw_ventana/README b/board/gateworks/gw_ventana/README
index 9e697d6199df96b4d162383598aa512e9a12c798..888657cb0c79f6c9447fff876315049aeb73a61e 100644
--- a/board/gateworks/gw_ventana/README
+++ b/board/gateworks/gw_ventana/README
@@ -3,53 +3,81 @@ U-Boot for the Gateworks Ventana Product Family boards
 This file contains information for the port of U-Boot to the Gateworks
 Ventana Product family boards.
 
-1. Boot source, boot from NAND
+1. Secondary Program Loader (SPL)
+---------------------------------
+
+The i.MX6 has a BOOT ROM PPL (Primary Program Loader) which supports loading
+an executable image from various boot devices.
+
+The Gateworks Ventana board config uses an SPL build configuration. This
+will build the following artifacts from u-boot source:
+ - SPL - Secondary Program Loader that the i.MX6 BOOT ROM (Primary Program
+         Loader) boots.  This detects CPU/DRAM configuration, configures
+         The DRAM controller, loads u-boot.img from the detected boot device,
+         and jumps to it.  As this is booted from the PPL, it has an IVT/DCD
+         table.
+ - u-boot.img - The main u-boot core which is u-boot.bin with a image header.
+
+
+2. Build
+--------
+
+To build U-Boot for the Gateworks Ventana product family:
+
+ make gwventana_config
+ make
+
+
+3. Boot source, boot from NAND
 ------------------------------
 
 The i.MX6 BOOT ROM expects some structures that provide details of NAND layout
 and bad block information (referred to as 'bootstreams') which are replicated
-multiple times in NAND. The number of replications is configurable through
-board strapping options and eFUSE settings.  The Freescale 'kobs-ng'
-application from the Freescale LTIB BSP, which runs under Linux, must be used
-to program the bootstream in order to setup the replicated headers correctly.
+multiple times in NAND. The number of replications and their spacing (referred
+to as search stride) is configurable through board strapping options and/or
+eFUSE settings (BOOT_SEARCH_COUNT / Pages in block from BOOT_CFG2). In
+addition, the i.MX6 BOOT ROM Flash Configuration Block (FCB) supports two
+copies of a bootloader in flash in the case that a bad block has corrupted one.
+The Freescale 'kobs-ng' application from the Freescale LTIB BSP, which runs
+under Linux and operates on an MTD partition, must be used to program the
+bootstream in order to setup this flash structure correctly.
 
 The Gateworks Ventana boards with NAND flash have been factory programmed
 such that their eFUSE settings expect 2 copies of the boostream (this is
 specified by providing kobs-ng with the --search_exponent=1 argument). Once in
-Linux with MTD support for the NAND on /dev/mtd0 you can program the boostream
+Linux with MTD support for the NAND on /dev/mtd0 you can program the SPL
 with:
 
-kobs-ng init -v -x --search_exponent=1 u-boot.imx
+kobs-ng init -v -x --search_exponent=1 SPL
 
-The kobs-ng application uses an imximage (u-boot.imx) which contains the
-Image Vector Table (IVT) and Device Configuration Data (DCD) structures that
-the i.MX6 BOOT ROM requires to boot.  The kobs-ng adds the Firmware
-Configuration Block (FCB) and Discovered Bad Block Table (DBBT).
+The kobs-ng application uses an imximage which contains the Image Vector Table
+(IVT) and Device Configuration Data (DCD) structures that the i.MX6 BOOT ROM
+requires to boot.  The kobs-ng adds the Firmware Configuration Block (FCB) and
+Discovered Bad Block Table (DBBT).  The SPL build artifact from u-boot is
+an imximage.
 
-This information is taken from:
-  http://trac.gateworks.com/wiki/ventana/bootloader#NANDFLASH
+The u-boot.img, which is the non SPL u-boot binary appended to a u-boot image
+header must be programmed in the NAND flash boot device at an offset hard
+coded in the SPL. For the Ventana boards, this has been chosen to be 14MB.
+The image can be programmed from either u-boot or Linux:
 
-More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual.
-
-2. Build
---------
+u-boot:
+Ventana > setenv mtdparts mtdparts=nand:14m(spl),2m(uboot),1m(env),-(rootfs)
+Ventana > tftp ${loadaddr} u-boot.img && nand erase.part uboot && \
+          nand write ${loadaddr} uboot ${filesize}
 
-There are several Gateworks Ventana boards that share a simliar design but
-vary based on CPU, Memory configuration, and subloaded devices.  Although
-the subloaded devices are handled dynamically in the bootloader using
-factory configured EEPROM data to modify the device-tree, the CPU choice
-(IMX6Q vs IMX6DL) and memory configurations are currently compile-time
-options.
+Linux:
+nandwrite /dev/mtd1 u-boot.img
 
-The following Gateworks Ventana configurations exist:
- gwventanaq1gspi: MX6Q,1GB,SPI FLASH
- gwventanaq     : MX6Q,512MB,NAND FLASH
- gwventanaq1g   : MX6Q,1GB,NAND FLASH
- gwventanadl    : MX6DL,512MB,NAND FLASH
- gwventanadl1g  : MX6DL,1GB,NAND FLASH
+The above assumes the default Ventana partitioning scheme which is configured
+via the mtdparts env var:
+ - spl: 14MB
+ - uboot: 2M
+ - env: 1M
+ - rootfs: the rest
 
-To build U-Boot for the MX6Q,1GB,NAND FLASH for example:
+This information is taken from:
+  http://trac.gateworks.com/wiki/ventana/bootloader#NANDFLASH
 
- make gwventanaq1g_config
- make
+More details about the i.MX6 BOOT ROM can be found in the IMX6 reference manual.
 
diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c
new file mode 100644
index 0000000000000000000000000000000000000000..e90186ebe8579417bcaf2264fa15fcecf0a2cdc3
--- /dev/null
+++ b/board/gateworks/gw_ventana/eeprom.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include "gsc.h"
+#include "ventana_eeprom.h"
+
+/* read ventana EEPROM, check for validity, and return baseboard type */
+int
+read_eeprom(int bus, struct ventana_board_info *info)
+{
+	int i;
+	int chksum;
+	char baseboard;
+	int type;
+	unsigned char *buf = (unsigned char *)info;
+
+	memset(info, 0, sizeof(*info));
+
+	/*
+	 * On a board with a missing/depleted backup battery for GSC, the
+	 * board may be ready to probe the GSC before its firmware is
+	 * running.  We will wait here indefinately for the GSC/EEPROM.
+	 */
+	while (1) {
+		if (0 == i2c_set_bus_num(bus) &&
+		    0 == i2c_probe(GSC_EEPROM_ADDR))
+			break;
+		mdelay(1);
+	}
+
+	/* read eeprom config section */
+	if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
+		puts("EEPROM: Failed to read EEPROM\n");
+		info->model[0] = 0;
+		return GW_UNKNOWN;
+	}
+
+	/* sanity checks */
+	if (info->model[0] != 'G' || info->model[1] != 'W') {
+		puts("EEPROM: Invalid Model in EEPROM\n");
+		info->model[0] = 0;
+		return GW_UNKNOWN;
+	}
+
+	/* validate checksum */
+	for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
+		chksum += buf[i];
+	if ((info->chksum[0] != chksum>>8) ||
+	    (info->chksum[1] != (chksum&0xff))) {
+		puts("EEPROM: Failed EEPROM checksum\n");
+		info->model[0] = 0;
+		return GW_UNKNOWN;
+	}
+
+	/* original GW5400-A prototype */
+	baseboard = info->model[3];
+	if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
+		baseboard = '0';
+
+	switch (baseboard) {
+	case '0': /* original GW5400-A prototype */
+		type = GW54proto;
+		break;
+	case '1':
+		type = GW51xx;
+		break;
+	case '2':
+		type = GW52xx;
+		break;
+	case '3':
+		type = GW53xx;
+		break;
+	case '4':
+		type = GW54xx;
+		break;
+	default:
+		printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
+		type = GW_UNKNOWN;
+		break;
+	}
+	return type;
+}
diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 031367d97a8e69cd24d73e1cd37181b123b48a9b..9d2651f0cbf1221fc67b36ee5ecaad2bfe372016 100644
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -84,122 +84,153 @@ DECLARE_GLOBAL_DATA_PTR;
  */
 static struct ventana_board_info ventana_info;
 
-enum {
-	GW54proto, /* original GW5400-A prototype */
-	GW51xx,
-	GW52xx,
-	GW53xx,
-	GW54xx,
-	GW_UNKNOWN,
-};
-
 int board_type;
 
 /* UART1: Function varies per baseboard */
 iomux_v3_cfg_t const uart1_pads[] = {
-	MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+	IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
 /* UART2: Serial Console */
 iomux_v3_cfg_t const uart2_pads[] = {
-	MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
-	MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
+	IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 
 /* I2C1: GSC */
-struct i2c_pads_info i2c_pad_info0 = {
+struct i2c_pads_info mx6q_i2c_pad_info0 = {
 	.scl = {
-		.i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC,
-		.gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
 		.gp = IMX_GPIO_NR(3, 21)
 	},
 	.sda = {
-		.i2c_mode = MX6_PAD_EIM_D28__I2C1_SDA | PC,
-		.gpio_mode = MX6_PAD_EIM_D28__GPIO3_IO28 | PC,
+		.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
+		.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
+		.gp = IMX_GPIO_NR(3, 28)
+	}
+};
+struct i2c_pads_info mx6dl_i2c_pad_info0 = {
+	.scl = {
+		.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
+		.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
 		.gp = IMX_GPIO_NR(3, 28)
 	}
 };
 
 /* I2C2: PMIC/PCIe Switch/PCIe Clock/Mezz */
-struct i2c_pads_info i2c_pad_info1 = {
+struct i2c_pads_info mx6q_i2c_pad_info1 = {
+	.scl = {
+		.i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC,
+		.gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC,
+		.gp = IMX_GPIO_NR(4, 12)
+	},
+	.sda = {
+		.i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC,
+		.gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+		.gp = IMX_GPIO_NR(4, 13)
+	}
+};
+struct i2c_pads_info mx6dl_i2c_pad_info1 = {
 	.scl = {
-		.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
-		.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
+		.i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC,
+		.gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC,
 		.gp = IMX_GPIO_NR(4, 12)
 	},
 	.sda = {
-		.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
-		.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
+		.i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC,
+		.gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC,
 		.gp = IMX_GPIO_NR(4, 13)
 	}
 };
 
 /* I2C3: Misc/Expansion */
-struct i2c_pads_info i2c_pad_info2 = {
+struct i2c_pads_info mx6q_i2c_pad_info2 = {
 	.scl = {
-		.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
-		.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
+		.i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC,
 		.gp = IMX_GPIO_NR(1, 3)
 	},
 	.sda = {
-		.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
-		.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
+		.i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC,
+		.gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC,
+		.gp = IMX_GPIO_NR(1, 6)
+	}
+};
+struct i2c_pads_info mx6dl_i2c_pad_info2 = {
+	.scl = {
+		.i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC,
+		.gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC,
+		.gp = IMX_GPIO_NR(1, 3)
+	},
+	.sda = {
+		.i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC,
+		.gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC,
 		.gp = IMX_GPIO_NR(1, 6)
 	}
 };
 
 /* MMC */
 iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
+	IOMUX_PADS(PAD_SD3_CLK__SD3_CLK    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_CMD__SD3_CMD    | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
+	/* CD */
+	IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00  | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 /* ENET */
 iomux_v3_cfg_t const enet_pads[] = {
-	MX6_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TXC__RGMII_TXC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD0__RGMII_TD0		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD1__RGMII_TD1		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD2__RGMII_TD2		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TD3__RGMII_TD3		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RXC__RGMII_RXC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD0__RGMII_RD0		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD1__RGMII_RD1		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD2__RGMII_RD2		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RD3__RGMII_RD3		| MUX_PAD_CTRL(ENET_PAD_CTRL),
-	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_MDC__ENET_MDC    | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL |
+		   MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK |
+		   MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3  | MUX_PAD_CTRL(ENET_PAD_CTRL)),
+	IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL |
+		   MUX_PAD_CTRL(ENET_PAD_CTRL)),
 	/* PHY nRST */
-	MX6_PAD_ENET_TXD0__GPIO1_IO30		| MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_TXD0__GPIO1_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 /* NAND */
 iomux_v3_cfg_t const nfc_pads[] = {
-	MX6_PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_ALE__NAND_ALE     | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_WP_B__NAND_WP_B   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_CS0__NAND_CE0_B   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_SD4_CMD__NAND_RE_B      | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_SD4_CLK__NAND_WE_B      | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D0__NAND_DATA00   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D1__NAND_DATA01   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D2__NAND_DATA02   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D3__NAND_DATA03   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D4__NAND_DATA04   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D5__NAND_DATA05   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D6__NAND_DATA06   | MUX_PAD_CTRL(NO_PAD_CTRL),
-	MX6_PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_NANDF_CLE__NAND_CLE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_ALE__NAND_ALE     | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_WP_B__NAND_WP_B   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_CS0__NAND_CE0_B   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CMD__NAND_RE_B      | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_SD4_CLK__NAND_WE_B      | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D0__NAND_DATA00   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D1__NAND_DATA01   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D2__NAND_DATA02   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D3__NAND_DATA03   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D4__NAND_DATA04   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D5__NAND_DATA05   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D6__NAND_DATA06   | MUX_PAD_CTRL(NO_PAD_CTRL)),
+	IOMUX_PADS(PAD_NANDF_D7__NAND_DATA07   | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 #ifdef CONFIG_CMD_NAND
@@ -208,7 +239,7 @@ static void setup_gpmi_nand(void)
 	struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 
 	/* config gpmi nand iomux */
-	imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads));
+	SETUP_IOMUX_PADS(nfc_pads);
 
 	/* config gpmi and bch clock to 100 MHz */
 	clrsetbits_le32(&mxc_ccm->cs2cdr,
@@ -234,7 +265,7 @@ static void setup_gpmi_nand(void)
 
 static void setup_iomux_enet(void)
 {
-	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
+	SETUP_IOMUX_PADS(enet_pads);
 
 	/* toggle PHY_RST# */
 	gpio_direction_output(GP_PHY_RST, 0);
@@ -244,35 +275,36 @@ static void setup_iomux_enet(void)
 
 static void setup_iomux_uart(void)
 {
-	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-	imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
+	SETUP_IOMUX_PADS(uart1_pads);
+	SETUP_IOMUX_PADS(uart2_pads);
 }
 
 #ifdef CONFIG_USB_EHCI_MX6
 iomux_v3_cfg_t const usb_pads[] = {
-	MX6_PAD_GPIO_1__USB_OTG_ID   | MUX_PAD_CTRL(DIO_PAD_CTRL),
-	MX6_PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL),
-	MX6_PAD_EIM_D22__GPIO3_IO22  | MUX_PAD_CTRL(DIO_PAD_CTRL), /* OTG PWR */
+	IOMUX_PADS(PAD_GPIO_1__USB_OTG_ID   | MUX_PAD_CTRL(DIO_PAD_CTRL)),
+	IOMUX_PADS(PAD_KEY_COL4__USB_OTG_OC | MUX_PAD_CTRL(DIO_PAD_CTRL)),
+	/* OTG PWR */
+	IOMUX_PADS(PAD_EIM_D22__GPIO3_IO22  | MUX_PAD_CTRL(DIO_PAD_CTRL)),
 };
 
 int board_ehci_hcd_init(int port)
 {
 	struct ventana_board_info *info = &ventana_info;
 
-	imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
+	SETUP_IOMUX_PADS(usb_pads);
 
 	/* Reset USB HUB (present on GW54xx/GW53xx) */
 	switch (info->model[3]) {
 	case '3': /* GW53xx */
-		imx_iomux_v3_setup_pad(MX6_PAD_GPIO_9__GPIO1_IO09|
-				       MUX_PAD_CTRL(NO_PAD_CTRL));
+		SETUP_IOMUX_PAD(PAD_GPIO_9__GPIO1_IO09 |
+				MUX_PAD_CTRL(NO_PAD_CTRL));
 		gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
 		mdelay(2);
 		gpio_set_value(IMX_GPIO_NR(1, 9), 1);
 		break;
 	case '4': /* GW54xx */
-		imx_iomux_v3_setup_pad(MX6_PAD_SD1_DAT0__GPIO1_IO16 |
-				       MUX_PAD_CTRL(NO_PAD_CTRL));
+		SETUP_IOMUX_PAD(PAD_SD1_DAT0__GPIO1_IO16 |
+				MUX_PAD_CTRL(NO_PAD_CTRL));
 		gpio_direction_output(IMX_GPIO_NR(1, 16), 0);
 		mdelay(2);
 		gpio_set_value(IMX_GPIO_NR(1, 16), 1);
@@ -304,7 +336,7 @@ int board_mmc_getcd(struct mmc *mmc)
 int board_mmc_init(bd_t *bis)
 {
 	/* Only one USDHC controller on Ventana */
-	imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
+	SETUP_IOMUX_PADS(usdhc3_pads);
 	usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
 	usdhc_cfg.max_bus_width = 4;
 
@@ -315,17 +347,16 @@ int board_mmc_init(bd_t *bis)
 #ifdef CONFIG_MXC_SPI
 iomux_v3_cfg_t const ecspi1_pads[] = {
 	/* SS1 */
-	MX6_PAD_EIM_D19__GPIO3_IO19  | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
-	MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19  | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL)),
+	IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)),
 };
 
 static void setup_spi(void)
 {
 	gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1);
-	imx_iomux_v3_setup_multiple_pads(ecspi1_pads,
-					 ARRAY_SIZE(ecspi1_pads));
+	SETUP_IOMUX_PADS(ecspi1_pads);
 }
 #endif
 
@@ -395,8 +426,7 @@ static void enable_lvds(struct display_info_t const *dev)
 	writel(reg, &iomux->gpr[2]);
 
 	/* Enable Backlight */
-	imx_iomux_v3_setup_pad(MX6_PAD_SD1_CMD__GPIO1_IO18 |
-			       MUX_PAD_CTRL(NO_PAD_CTRL));
+	SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL));
 	gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
 }
 
@@ -493,90 +523,11 @@ static void setup_display(void)
 	writel(reg, &iomux->gpr[3]);
 
 	/* Backlight CABEN on LVDS connector */
-	imx_iomux_v3_setup_pad(MX6_PAD_SD2_CLK__GPIO1_IO10 |
-			       MUX_PAD_CTRL(NO_PAD_CTRL));
+	SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL));
 	gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
 }
 #endif /* CONFIG_VIDEO_IPUV3 */
 
-/* read ventana EEPROM, check for validity, and return baseboard type */
-static int
-read_eeprom(void)
-{
-	int i;
-	int chksum;
-	char baseboard;
-	int type;
-	struct ventana_board_info *info = &ventana_info;
-	unsigned char *buf = (unsigned char *)&ventana_info;
-
-	memset(info, 0, sizeof(ventana_info));
-
-	/*
-	 * On a board with a missing/depleted backup battery for GSC, the
-	 * board may be ready to probe the GSC before its firmware is
-	 * running.  We will wait here indefinately for the GSC/EEPROM.
-	 */
-	while (1) {
-		if (0 == i2c_set_bus_num(I2C_GSC) &&
-		    0 == i2c_probe(GSC_EEPROM_ADDR))
-			break;
-		mdelay(1);
-	}
-
-	/* read eeprom config section */
-	if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(ventana_info))) {
-		puts("EEPROM: Failed to read EEPROM\n");
-		info->model[0] = 0;
-		return GW_UNKNOWN;
-	}
-
-	/* sanity checks */
-	if (info->model[0] != 'G' || info->model[1] != 'W') {
-		puts("EEPROM: Invalid Model in EEPROM\n");
-		info->model[0] = 0;
-		return GW_UNKNOWN;
-	}
-
-	/* validate checksum */
-	for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
-		chksum += buf[i];
-	if ((info->chksum[0] != chksum>>8) ||
-	    (info->chksum[1] != (chksum&0xff))) {
-		puts("EEPROM: Failed EEPROM checksum\n");
-		info->model[0] = 0;
-		return GW_UNKNOWN;
-	}
-
-	/* original GW5400-A prototype */
-	baseboard = info->model[3];
-	if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
-		baseboard = '0';
-
-	switch (baseboard) {
-	case '0': /* original GW5400-A prototype */
-		type = GW54proto;
-		break;
-	case '1':
-		type = GW51xx;
-		break;
-	case '2':
-		type = GW52xx;
-		break;
-	case '3':
-		type = GW53xx;
-		break;
-	case '4':
-		type = GW54xx;
-		break;
-	default:
-		printf("EEPROM: Unknown model in EEPROM: %s\n", info->model);
-		type = GW_UNKNOWN;
-		break;
-	}
-	return type;
-}
-
 /*
  * Baseboard specific GPIO
  */
@@ -584,118 +535,118 @@ read_eeprom(void)
 /* common to add baseboards */
 static iomux_v3_cfg_t const gw_gpio_pads[] = {
 	/* MSATA_EN */
-	MX6_PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* RS232_EN# */
-	MX6_PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 /* prototype */
 static iomux_v3_cfg_t const gwproto_gpio_pads[] = {
 	/* PANLEDG# */
-	MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PANLEDR# */
-	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* LOCLED# */
-	MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* RS485_EN */
-	MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_PWREN# */
-	MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_IRQ# */
-	MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* VID_EN */
-	MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* DIOI2C_DIS# */
-	MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCICK_SSON */
-	MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCI_RST# */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 static iomux_v3_cfg_t const gw51xx_gpio_pads[] = {
 	/* PANLEDG# */
-	MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PANLEDR# */
-	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_PWREN# */
-	MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_IRQ# */
-	MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 
 	/* GPS_SHDN */
-	MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* VID_PWR */
-	MX6_PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_CSI0_DATA_EN__GPIO5_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCI_RST# */
-	MX6_PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_0__GPIO1_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 static iomux_v3_cfg_t const gw52xx_gpio_pads[] = {
 	/* PANLEDG# */
-	MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PANLEDR# */
-	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_PWREN# */
-	MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_IRQ# */
-	MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 
 	/* MX6_LOCLED# */
-	MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* GPS_SHDN */
-	MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* USBOTG_SEL */
-	MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* VID_PWR */
-	MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCI_RST# */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 static iomux_v3_cfg_t const gw53xx_gpio_pads[] = {
 	/* PANLEDG# */
-	MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PANLEDR# */
-	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_PWREN# */
-	MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_IRQ# */
-	MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 
 	/* MX6_LOCLED# */
-	MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* GPS_SHDN */
-	MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* VID_EN */
-	MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCI_RST# */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
 	/* PANLEDG# */
-	MX6_PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL0__GPIO4_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PANLEDR# */
-	MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* MX6_LOCLED# */
-	MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* MIPI_DIO */
-	MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* RS485_EN */
-	MX6_PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_EIM_D24__GPIO3_IO24 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_PWREN# */
-	MX6_PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW0__GPIO4_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* IOEXP_IRQ# */
-	MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* DIOI2C_DIS# */
-	MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* DIOI2C_DIS# */
-	MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCICK_SSON */
-	MX6_PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 	/* PCI_RST# */
-	MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+	IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 };
 
 /*
@@ -703,9 +654,9 @@ static iomux_v3_cfg_t const gw54xx_gpio_pads[] = {
  * be pinmuxed as a GPIO or in some cases a PWM
  */
 struct dio_cfg {
-	iomux_v3_cfg_t gpio_padmux;
+	iomux_v3_cfg_t gpio_padmux[2];
 	unsigned gpio_param;
-	iomux_v3_cfg_t pwm_padmux;
+	iomux_v3_cfg_t pwm_padmux[2];
 	unsigned pwm_param;
 };
 
@@ -732,16 +683,32 @@ struct ventana gpio_cfg[] = {
 	/* GW5400proto */
 	{
 		.gpio_pads = gw54xx_gpio_pads,
-		.num_pads = ARRAY_SIZE(gw54xx_gpio_pads),
+		.num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
 		.dio_cfg = {
-			{ MX6_PAD_GPIO_9__GPIO1_IO09, IMX_GPIO_NR(1, 9),
-			  MX6_PAD_GPIO_9__PWM1_OUT, 1 },
-			{ MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
-			  MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
-			{ MX6_PAD_SD4_DAT1__GPIO2_IO09, IMX_GPIO_NR(2, 9),
-			  MX6_PAD_SD4_DAT1__PWM3_OUT, 3 },
-			{ MX6_PAD_SD4_DAT2__GPIO2_IO10, IMX_GPIO_NR(2, 10),
-			  MX6_PAD_SD4_DAT2__PWM4_OUT, 4 },
+			{
+				{ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09) },
+				IMX_GPIO_NR(1, 9),
+				{ IOMUX_PADS(PAD_GPIO_9__PWM1_OUT) },
+				1
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+				IMX_GPIO_NR(1, 19),
+				{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+				2
+			},
+			{
+				{ IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09) },
+				IMX_GPIO_NR(2, 9),
+				{ IOMUX_PADS(PAD_SD4_DAT1__PWM3_OUT) },
+				3
+			},
+			{
+				{ IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10) },
+				IMX_GPIO_NR(2, 10),
+				{ IOMUX_PADS(PAD_SD4_DAT2__PWM4_OUT) },
+				4
+			},
 		},
 		.leds = {
 			IMX_GPIO_NR(4, 6),
@@ -759,16 +726,32 @@ struct ventana gpio_cfg[] = {
 	/* GW51xx */
 	{
 		.gpio_pads = gw51xx_gpio_pads,
-		.num_pads = ARRAY_SIZE(gw51xx_gpio_pads),
+		.num_pads = ARRAY_SIZE(gw51xx_gpio_pads)/2,
 		.dio_cfg = {
-			{ MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
-			  0, 0 },
-			{ MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
-			  MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
-			{ MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
-			  MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
-			{ MX6_PAD_SD1_CMD__GPIO1_IO18, IMX_GPIO_NR(1, 18),
-			  MX6_PAD_SD1_CMD__PWM4_OUT, 4 },
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+				IMX_GPIO_NR(1, 16),
+				{ 0, 0 },
+				0
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+				IMX_GPIO_NR(1, 19),
+				{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+				2
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+				IMX_GPIO_NR(1, 17),
+				{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+				3
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) },
+				IMX_GPIO_NR(1, 18),
+				{ IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) },
+				4
+			},
 		},
 		.leds = {
 			IMX_GPIO_NR(4, 6),
@@ -784,16 +767,32 @@ struct ventana gpio_cfg[] = {
 	/* GW52xx */
 	{
 		.gpio_pads = gw52xx_gpio_pads,
-		.num_pads = ARRAY_SIZE(gw52xx_gpio_pads),
+		.num_pads = ARRAY_SIZE(gw52xx_gpio_pads)/2,
 		.dio_cfg = {
-			{ MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
-			  0, 0 },
-			{ MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
-			  MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
-			{ MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
-			  MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
-			{ MX6_PAD_SD1_CLK__GPIO1_IO20, IMX_GPIO_NR(1, 20),
-			  0, 0 },
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+				IMX_GPIO_NR(1, 16),
+				{ 0, 0 },
+				0
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+				IMX_GPIO_NR(1, 19),
+				{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+				2
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+				IMX_GPIO_NR(1, 17),
+				{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+				3
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+				IMX_GPIO_NR(1, 20),
+				{ 0, 0 },
+				0
+			},
 		},
 		.leds = {
 			IMX_GPIO_NR(4, 6),
@@ -811,16 +810,32 @@ struct ventana gpio_cfg[] = {
 	/* GW53xx */
 	{
 		.gpio_pads = gw53xx_gpio_pads,
-		.num_pads = ARRAY_SIZE(gw53xx_gpio_pads),
+		.num_pads = ARRAY_SIZE(gw53xx_gpio_pads)/2,
 		.dio_cfg = {
-			{ MX6_PAD_SD1_DAT0__GPIO1_IO16, IMX_GPIO_NR(1, 16),
-			  0, 0 },
-			{ MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
-			  MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
-			{ MX6_PAD_SD1_DAT1__GPIO1_IO17, IMX_GPIO_NR(1, 17),
-			  MX6_PAD_SD1_DAT1__PWM3_OUT, 3 },
-			{ MX6_PAD_SD1_CLK__GPIO1_IO20, IMX_GPIO_NR(1, 20),
-			  0, 0 },
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) },
+				IMX_GPIO_NR(1, 16),
+				{ 0, 0 },
+				0
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+				IMX_GPIO_NR(1, 19),
+				{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+				2
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) },
+				IMX_GPIO_NR(1, 17),
+				{ IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) },
+				3
+			},
+			{
+				{IOMUX_PADS(PAD_SD1_CLK__GPIO1_IO20) },
+				IMX_GPIO_NR(1, 20),
+				{ 0, 0 },
+				0
+			},
 		},
 		.leds = {
 			IMX_GPIO_NR(4, 6),
@@ -837,16 +852,32 @@ struct ventana gpio_cfg[] = {
 	/* GW54xx */
 	{
 		.gpio_pads = gw54xx_gpio_pads,
-		.num_pads = ARRAY_SIZE(gw54xx_gpio_pads),
+		.num_pads = ARRAY_SIZE(gw54xx_gpio_pads)/2,
 		.dio_cfg = {
-			{ MX6_PAD_GPIO_9__GPIO1_IO09, IMX_GPIO_NR(1, 9),
-			  MX6_PAD_GPIO_9__PWM1_OUT, 1 },
-			{ MX6_PAD_SD1_DAT2__GPIO1_IO19, IMX_GPIO_NR(1, 19),
-			  MX6_PAD_SD1_DAT2__PWM2_OUT, 2 },
-			{ MX6_PAD_SD4_DAT1__GPIO2_IO09, IMX_GPIO_NR(2, 9),
-			  MX6_PAD_SD4_DAT1__PWM3_OUT, 3 },
-			{ MX6_PAD_SD4_DAT2__GPIO2_IO10, IMX_GPIO_NR(2, 10),
-			  MX6_PAD_SD4_DAT2__PWM4_OUT, 4 },
+			{
+				{ IOMUX_PADS(PAD_GPIO_9__GPIO1_IO09) },
+				IMX_GPIO_NR(1, 9),
+				{ IOMUX_PADS(PAD_GPIO_9__PWM1_OUT) },
+				1
+			},
+			{
+				{ IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) },
+				IMX_GPIO_NR(1, 19),
+				{ IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) },
+				2
+			},
+			{
+				{ IOMUX_PADS(PAD_SD4_DAT1__GPIO2_IO09) },
+				IMX_GPIO_NR(2, 9),
+				{ IOMUX_PADS(PAD_SD4_DAT1__PWM3_OUT) },
+				3
+			},
+			{
+				{ IOMUX_PADS(PAD_SD4_DAT2__GPIO2_IO10) },
+				IMX_GPIO_NR(2, 10),
+				{ IOMUX_PADS(PAD_SD4_DAT2__PWM4_OUT) },
+				4
+			},
 		},
 		.leds = {
 			IMX_GPIO_NR(4, 6),
@@ -992,6 +1023,7 @@ static void setup_board_gpio(int board)
 	for (i = 0; i < 4; i++) {
 		struct dio_cfg *cfg = &gpio_cfg[board].dio_cfg[i];
 		unsigned ctrl = DIO_PAD_CTRL;
+		unsigned cputype = is_cpu_type(MXC_CPU_MX6Q) ? 0 : 1;
 
 		sprintf(arg, "dio%d", i);
 		if (!hwconfig(arg))
@@ -1006,14 +1038,14 @@ static void setup_board_gpio(int board)
 				       cfg->gpio_param%32,
 				       cfg->gpio_param);
 			}
-			imx_iomux_v3_setup_pad(cfg->gpio_padmux |
+			imx_iomux_v3_setup_pad(cfg->gpio_padmux[cputype] |
 					       MUX_PAD_CTRL(ctrl));
 			gpio_direction_input(cfg->gpio_param);
 		} else if (hwconfig_subarg_cmp("dio2", "mode", "pwm") &&
 			   cfg->pwm_padmux) {
 			if (!quiet)
 				printf("DIO%d:  pwm%d\n", i, cfg->pwm_param);
-			imx_iomux_v3_setup_pad(cfg->pwm_padmux |
+			imx_iomux_v3_setup_pad(cfg->pwm_padmux[cputype] |
 					       MUX_PAD_CTRL(ctrl));
 		}
 	}
@@ -1033,9 +1065,10 @@ static void setup_board_gpio(int board)
 int imx6_pcie_toggle_reset(void)
 {
 	if (board_type < GW_UNKNOWN) {
-		gpio_direction_output(gpio_cfg[board_type].pcie_rst, 0);
+		uint pin = gpio_cfg[board_type].pcie_rst;
+		gpio_direction_output(pin, 0);
 		mdelay(50);
-		gpio_direction_output(gpio_cfg[board_type].pcie_rst, 1);
+		gpio_direction_output(pin, 1);
 	}
 	return 0;
 }
@@ -1069,6 +1102,7 @@ void get_board_serial(struct tag_serialnr *serialnr)
  * Board Support
  */
 
+/* called from SPL board_init_f() */
 int board_early_init_f(void)
 {
 	setup_iomux_uart();
@@ -1082,9 +1116,7 @@ int board_early_init_f(void)
 
 int dram_init(void)
 {
-	gd->ram_size = get_ram_size((void *)PHYS_SDRAM,
-				    CONFIG_DDR_MB*1024*1024);
-
+	gd->ram_size = imx_ddr_size();
 	return 0;
 }
 
@@ -1106,22 +1138,29 @@ int board_init(void)
 #ifdef CONFIG_MXC_SPI
 	setup_spi();
 #endif
-	setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0);
-	setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
-	setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
+	if (is_cpu_type(MXC_CPU_MX6Q)) {
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0);
+		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
+		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info2);
+	} else {
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0);
+		setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
+		setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info2);
+	}
 
 #ifdef CONFIG_CMD_SATA
 	setup_sata();
 #endif
 	/* read Gateworks EEPROM into global struct (used later) */
-	board_type = read_eeprom();
+	board_type = read_eeprom(I2C_GSC, &ventana_info);
 
 	/* board-specifc GPIO iomux */
+	SETUP_IOMUX_PADS(gw_gpio_pads);
 	if (board_type < GW_UNKNOWN) {
-		imx_iomux_v3_setup_multiple_pads(gw_gpio_pads,
-						 ARRAY_SIZE(gw_gpio_pads));
-		imx_iomux_v3_setup_multiple_pads(gpio_cfg[board_type].gpio_pads,
-						 gpio_cfg[board_type].num_pads);
+		iomux_v3_cfg_t const *p = gpio_cfg[board_type].gpio_pads;
+		int count = gpio_cfg[board_type].num_pads;
+
+		imx_iomux_v3_setup_multiple_pads(p, count);
 	}
 
 	return 0;
@@ -1219,9 +1258,11 @@ int misc_init_r(void)
 		 * env scripts will try loading each from most specific to
 		 * least.
 		 */
-		if (is_cpu_type(MXC_CPU_MX6Q))
+		if (is_cpu_type(MXC_CPU_MX6Q) ||
+		    is_cpu_type(MXC_CPU_MX6D))
 			cputype = "imx6q";
-		else if (is_cpu_type(MXC_CPU_MX6DL))
+		else if (is_cpu_type(MXC_CPU_MX6DL) ||
+			 is_cpu_type(MXC_CPU_MX6SOLO))
 			cputype = "imx6dl";
 		memset(str, 0, sizeof(str));
 		for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
diff --git a/board/gateworks/gw_ventana/gw_ventana.cfg b/board/gateworks/gw_ventana/gw_ventana.cfg
index 27f09745c1bcf998f4f34154fe947d2d3411b702..9ab95f5c93f984da42334d2c86d46d66ce0cfc2f 100644
--- a/board/gateworks/gw_ventana/gw_ventana.cfg
+++ b/board/gateworks/gw_ventana/gw_ventana.cfg
@@ -24,21 +24,6 @@ BOOT_FROM      nand
 
 #define __ASSEMBLY__
 #include <config.h>
-#include "asm/arch/mx6-ddr.h"
 #include "asm/arch/iomux.h"
 #include "asm/arch/crm_regs.h"
-
-/* Memory configuration (size is overridden via eeprom config) */
-#include "../../boundary/nitrogen6x/ddr-setup.cfg"
-#if defined(CONFIG_MX6Q) && CONFIG_DDR_MB == 1024
-  #include "../../boundary/nitrogen6x/1066mhz_4x128mx16.cfg"
-#elif defined(CONFIG_MX6DL) && CONFIG_DDR_MB == 1024
-  #include "../../boundary/nitrogen6x/800mhz_4x128mx16.cfg"
-#elif defined(CONFIG_MX6DL) && CONFIG_DDR_MB == 512
-  #include "../../boundary/nitrogen6x/800mhz_2x128mx16.cfg"
-#elif defined(CONFIG_MX6Q) && CONFIG_DDR_MB == 512
-  #include "../../boundary/nitrogen6x/800mhz_2x128mx16.cfg"
-#else
-  #error "Unsupported CPU/Memory configuration"
-#endif
 #include "clocks.cfg"
diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c
new file mode 100644
index 0000000000000000000000000000000000000000..e9438793036f90370ac091b61ad246d4527a043f
--- /dev/null
+++ b/board/gateworks/gw_ventana/gw_ventana_spl.c
@@ -0,0 +1,419 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/mx6-ddr.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/imx-common/boot_mode.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/imx-common/mxc_i2c.h>
+#include <spl.h>
+
+#include "ventana_eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */
+#define I2C_GSC			0
+#define GSC_EEPROM_ADDR		0x51
+#define GSC_EEPROM_DDR_SIZE	0x2B	/* enum (512,1024,2048) MB */
+#define GSC_EEPROM_DDR_WIDTH	0x2D	/* enum (32,64) bit */
+#define I2C_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                    \
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS |   \
+	PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
+#define CONFIG_SYS_I2C_SPEED	100000
+
+/* I2C1: GSC */
+static struct i2c_pads_info mx6q_i2c_pad_info0 = {
+	.scl = {
+		.i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		.i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC,
+		.gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC,
+		.gp = IMX_GPIO_NR(3, 28)
+	}
+};
+static struct i2c_pads_info mx6dl_i2c_pad_info0 = {
+	.scl = {
+		.i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC,
+		.gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC,
+		.gp = IMX_GPIO_NR(3, 21)
+	},
+	.sda = {
+		.i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC,
+		.gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC,
+		.gp = IMX_GPIO_NR(3, 28)
+	}
+};
+
+static void i2c_setup_iomux(void)
+{
+	if (is_cpu_type(MXC_CPU_MX6Q))
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info0);
+	else
+		setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info0);
+}
+
+/* configure MX6Q/DUAL mmdc DDR io registers */
+struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
+	/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
+	.dram_sdclk_0 = 0x00020030,
+	.dram_sdclk_1 = 0x00020030,
+	.dram_cas = 0x00020030,
+	.dram_ras = 0x00020030,
+	.dram_reset = 0x00020030,
+	/* SDCKE[0:1]: 100k pull-up */
+	.dram_sdcke0 = 0x00003000,
+	.dram_sdcke1 = 0x00003000,
+	/* SDBA2: pull-up disabled */
+	.dram_sdba2 = 0x00000000,
+	/* SDODT[0:1]: 100k pull-up, 40 ohm */
+	.dram_sdodt0 = 0x00003030,
+	.dram_sdodt1 = 0x00003030,
+	/* SDQS[0:7]: Differential input, 40 ohm */
+	.dram_sdqs0 = 0x00000030,
+	.dram_sdqs1 = 0x00000030,
+	.dram_sdqs2 = 0x00000030,
+	.dram_sdqs3 = 0x00000030,
+	.dram_sdqs4 = 0x00000030,
+	.dram_sdqs5 = 0x00000030,
+	.dram_sdqs6 = 0x00000030,
+	.dram_sdqs7 = 0x00000030,
+
+	/* DQM[0:7]: Differential input, 40 ohm */
+	.dram_dqm0 = 0x00020030,
+	.dram_dqm1 = 0x00020030,
+	.dram_dqm2 = 0x00020030,
+	.dram_dqm3 = 0x00020030,
+	.dram_dqm4 = 0x00020030,
+	.dram_dqm5 = 0x00020030,
+	.dram_dqm6 = 0x00020030,
+	.dram_dqm7 = 0x00020030,
+};
+
+/* configure MX6Q/DUAL mmdc GRP io registers */
+struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
+	/* DDR3 */
+	.grp_ddr_type = 0x000c0000,
+	.grp_ddrmode_ctl = 0x00020000,
+	/* disable DDR pullups */
+	.grp_ddrpke = 0x00000000,
+	/* ADDR[00:16], SDBA[0:1]: 40 ohm */
+	.grp_addds = 0x00000030,
+	/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
+	.grp_ctlds = 0x00000030,
+	/* DATA[00:63]: Differential input, 40 ohm */
+	.grp_ddrmode = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_b2ds = 0x00000030,
+	.grp_b3ds = 0x00000030,
+	.grp_b4ds = 0x00000030,
+	.grp_b5ds = 0x00000030,
+	.grp_b6ds = 0x00000030,
+	.grp_b7ds = 0x00000030,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc DDR io registers */
+struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
+	/* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
+	.dram_sdclk_0 = 0x00020030,
+	.dram_sdclk_1 = 0x00020030,
+	.dram_cas = 0x00020030,
+	.dram_ras = 0x00020030,
+	.dram_reset = 0x00020030,
+	/* SDCKE[0:1]: 100k pull-up */
+	.dram_sdcke0 = 0x00003000,
+	.dram_sdcke1 = 0x00003000,
+	/* SDBA2: pull-up disabled */
+	.dram_sdba2 = 0x00000000,
+	/* SDODT[0:1]: 100k pull-up, 40 ohm */
+	.dram_sdodt0 = 0x00003030,
+	.dram_sdodt1 = 0x00003030,
+	/* SDQS[0:7]: Differential input, 40 ohm */
+	.dram_sdqs0 = 0x00000030,
+	.dram_sdqs1 = 0x00000030,
+	.dram_sdqs2 = 0x00000030,
+	.dram_sdqs3 = 0x00000030,
+	.dram_sdqs4 = 0x00000030,
+	.dram_sdqs5 = 0x00000030,
+	.dram_sdqs6 = 0x00000030,
+	.dram_sdqs7 = 0x00000030,
+
+	/* DQM[0:7]: Differential input, 40 ohm */
+	.dram_dqm0 = 0x00020030,
+	.dram_dqm1 = 0x00020030,
+	.dram_dqm2 = 0x00020030,
+	.dram_dqm3 = 0x00020030,
+	.dram_dqm4 = 0x00020030,
+	.dram_dqm5 = 0x00020030,
+	.dram_dqm6 = 0x00020030,
+	.dram_dqm7 = 0x00020030,
+};
+
+/* configure MX6SOLO/DUALLITE mmdc GRP io registers */
+struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
+	/* DDR3 */
+	.grp_ddr_type = 0x000c0000,
+	/* SDQS[0:7]: Differential input, 40 ohm */
+	.grp_ddrmode_ctl = 0x00020000,
+	/* disable DDR pullups */
+	.grp_ddrpke = 0x00000000,
+	/* ADDR[00:16], SDBA[0:1]: 40 ohm */
+	.grp_addds = 0x00000030,
+	/* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
+	.grp_ctlds = 0x00000030,
+	/* DATA[00:63]: Differential input, 40 ohm */
+	.grp_ddrmode = 0x00020000,
+	.grp_b0ds = 0x00000030,
+	.grp_b1ds = 0x00000030,
+	.grp_b2ds = 0x00000030,
+	.grp_b3ds = 0x00000030,
+	.grp_b4ds = 0x00000030,
+	.grp_b5ds = 0x00000030,
+	.grp_b6ds = 0x00000030,
+	.grp_b7ds = 0x00000030,
+};
+
+/* MT41K128M16JT-125 */
+static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
+	.mem_speed = 1600,
+	.density = 2,
+	.width = 16,
+	.banks = 8,
+	.rowaddr = 14,
+	.coladdr = 10,
+	.pagesz = 2,
+	.trcd = 1375,
+	.trcmin = 4875,
+	.trasmin = 3500,
+};
+
+/* GW54xx specific calibration */
+static struct mx6_mmdc_calibration gw54xxq_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x00190018,
+	.p0_mpwldectrl1 = 0x0021001D,
+	.p1_mpwldectrl0 = 0x00160027,
+	.p1_mpwldectrl1 = 0x0012001E,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x43370346,
+	.p0_mpdgctrl1 = 0x032A0321,
+	.p1_mpdgctrl0 = 0x433A034D,
+	.p1_mpdgctrl1 = 0x032F0235,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x3C313539,
+	.p1_mprddlctl = 0x37333140,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x37393C38,
+	.p1_mpwrdlctl = 0x42334538,
+};
+
+/* GW53xx specific calibration */
+static struct mx6_mmdc_calibration gw53xxq_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x00160013,
+	.p0_mpwldectrl1 = 0x00090024,
+	.p1_mpwldectrl0 = 0x001F0018,
+	.p1_mpwldectrl1 = 0x000C001C,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x433A034C,
+	.p0_mpdgctrl1 = 0x0336032F,
+	.p1_mpdgctrl0 = 0x4343034A,
+	.p1_mpdgctrl1 = 0x03370222,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x3F343638,
+	.p1_mprddlctl = 0x38373442,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x343A3E39,
+	.p1_mpwrdlctl = 0x44344239,
+};
+static struct mx6_mmdc_calibration gw53xxdl_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x003C003C,
+	.p0_mpwldectrl1 = 0x00330038,
+	.p1_mpwldectrl0 = 0x001F002A,
+	.p1_mpwldectrl1 = 0x0022003F,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x42410244,
+	.p0_mpdgctrl1 = 0x022D022D,
+	.p1_mpdgctrl0 = 0x4234023A,
+	.p1_mpdgctrl1 = 0x021C0228,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x484A4C4B,
+	.p1_mprddlctl = 0x4B4D4E4B,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x33342B32,
+	.p1_mpwrdlctl = 0x3933332B,
+};
+
+/* GW52xx specific calibration */
+static struct mx6_mmdc_calibration gw52xxdl_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x0040003F,
+	.p0_mpwldectrl1 = 0x00370037,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x42420244,
+	.p0_mpdgctrl1 = 0x022F022F,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x49464B4A,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x32362C32,
+};
+
+/* GW51xx specific calibration */
+static struct mx6_mmdc_calibration gw51xxq_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x00150016,
+	.p0_mpwldectrl1 = 0x001F0017,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x433D034D,
+	.p0_mpdgctrl1 = 0x033D032F,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x3F313639,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x33393F36,
+};
+
+static struct mx6_mmdc_calibration gw51xxdl_mmdc_calib = {
+	/* write leveling calibration determine */
+	.p0_mpwldectrl0 = 0x003D003F,
+	.p0_mpwldectrl1 = 0x002F0038,
+	/* Read DQS Gating calibration */
+	.p0_mpdgctrl0 = 0x423A023A,
+	.p0_mpdgctrl1 = 0x022A0228,
+	/* Read Calibration: DQS delay relative to DQ read access */
+	.p0_mprddlctl = 0x48494C4C,
+	/* Write Calibration: DQ/DM delay relative to DQS write access */
+	.p0_mpwrdlctl = 0x34352D31,
+};
+
+static void spl_dram_init(int width, int size, int board_model)
+{
+	struct mx6_ddr3_cfg *mem = &mt41k128m16jt_125;
+	struct mx6_mmdc_calibration *calib;
+	struct mx6_ddr_sysinfo sysinfo = {
+		/* width of data bus:0=16,1=32,2=64 */
+		.dsize = width/32,
+		/* config for full 4GB range so that get_mem_size() works */
+		.cs_density = 32, /* 32Gb per CS */
+		/* single chip select */
+		.ncs = 1,
+		.cs1_mirror = 0,
+		.rtt_wr = 1 /*DDR3_RTT_60_OHM*/,	/* RTT_Wr = RZQ/4 */
+#ifdef RTT_NOM_120OHM
+		.rtt_nom = 2 /*DDR3_RTT_120_OHM*/,	/* RTT_Nom = RZQ/2 */
+#else
+		.rtt_nom = 1 /*DDR3_RTT_60_OHM*/,	/* RTT_Nom = RZQ/4 */
+#endif
+		.walat = 1,	/* Write additional latency */
+		.ralat = 5,	/* Read additional latency */
+		.mif3_mode = 3,	/* Command prediction working mode */
+		.bi_on = 1,	/* Bank interleaving enabled */
+		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
+		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
+	};
+
+	/*
+	 * MMDC Calibration requires the following data:
+	 *   mx6_mmdc_calibration - board-specific calibration (routing delays)
+	 *   mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc)
+	 *   mx6_ddr_cfg - chip specific timing/layout details
+	 */
+	switch (board_model) {
+	default:
+	case GW51xx:
+		if (is_cpu_type(MXC_CPU_MX6Q))
+			calib = &gw51xxq_mmdc_calib;
+		else
+			calib = &gw51xxdl_mmdc_calib;
+		break;
+	case GW52xx:
+		calib = &gw52xxdl_mmdc_calib;
+		break;
+	case GW53xx:
+		if (is_cpu_type(MXC_CPU_MX6Q))
+			calib = &gw53xxq_mmdc_calib;
+		else
+			calib = &gw53xxdl_mmdc_calib;
+		break;
+	case GW54xx:
+		calib = &gw54xxq_mmdc_calib;
+		break;
+	}
+
+	if (is_cpu_type(MXC_CPU_MX6Q))
+		mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs,
+				 &mx6dq_grp_ioregs);
+	else
+		mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs,
+				  &mx6sdl_grp_ioregs);
+	mx6_dram_cfg(&sysinfo, calib, mem);
+}
+
+/*
+ * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
+ * - we have a stack and a place to store GD, both in SRAM
+ * - no variable global data is available
+ */
+void board_init_f(ulong dummy)
+{
+	struct ventana_board_info ventana_info;
+	int board_model;
+
+	/*
+	 * Zero out global data:
+	 *  - this shoudl be done by crt0.S
+	 *  - failure to zero it will cause i2c_setup to fail
+	 */
+	memset((void *)gd, 0, sizeof(struct global_data));
+
+	/* setup AIPS and disable watchdog */
+	arch_cpu_init();
+
+	/* iomux and setup of i2c */
+	board_early_init_f();
+	i2c_setup_iomux();
+
+	/* setup GP timer */
+	timer_init();
+
+	/* UART clocks enabled and gd valid - init serial console */
+	preloader_console_init();
+
+	/* read/validate EEPROM info to determine board model and SDRAM cfg */
+	board_model = read_eeprom(I2C_GSC, &ventana_info);
+
+	/* provide some some default: 32bit 128MB */
+	if (GW_UNKNOWN == board_model) {
+		ventana_info.sdram_width = 2;
+		ventana_info.sdram_size = 3;
+	}
+
+	/* configure MMDC for SDRAM width/size and per-model calibration */
+	spl_dram_init(8 << ventana_info.sdram_width,
+		      16 << ventana_info.sdram_size,
+		      board_model);
+
+	/* Clear the BSS. */
+	memset(__bss_start, 0, __bss_end - __bss_start);
+
+	/* load/boot image from boot device */
+	board_init_r(NULL, 0);
+}
+
+void reset_cpu(ulong addr)
+{
+}
diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h
index 434b604542045537b85bfc2d5e66f2702ea4f967..5b065bea4eefc545331e3748b04d98b7eb705324 100644
--- a/board/gateworks/gw_ventana/ventana_eeprom.h
+++ b/board/gateworks/gw_ventana/ventana_eeprom.h
@@ -103,4 +103,15 @@ enum {
 	EECONFIG_RES15,
 };
 
+enum {
+	GW54proto, /* original GW5400-A prototype */
+	GW51xx,
+	GW52xx,
+	GW53xx,
+	GW54xx,
+	GW_UNKNOWN,
+};
+
+int read_eeprom(int bus, struct ventana_board_info *);
+
 #endif
diff --git a/boards.cfg b/boards.cfg
index 7a3beeaddb0ab0141790b5fda9dcfb530aa86722..24e3a9c158fc9c6e1105433e5d834b805ba29fb0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -209,6 +209,7 @@ Active  arm         arm926ejs      mxs         freescale       mx23evk
 Active  arm         arm926ejs      mxs         freescale       mx28evk             mx28evk                               mx28evk:ENV_IS_IN_MMC                                                                                                             Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         arm926ejs      mxs         freescale       mx28evk             mx28evk_auart_console                 mx28evk:MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE,ENV_IS_IN_MMC                                                                  Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         arm926ejs      mxs         freescale       mx28evk             mx28evk_nand                          mx28evk:ENV_IS_IN_NAND                                                                                                            Fabio Estevam <fabio.estevam@freescale.com>
+Active  arm         arm926ejs      mxs         freescale       mx28evk             mx28evk_spi                          mx28evk:ENV_IS_IN_SPI_FLASH                                                                                                            Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         arm926ejs      mxs         olimex          mx23_olinuxino      mx23_olinuxino                        -                                                                                                                                 Marek Vasut <marek.vasut@gmail.com>
 Active  arm         arm926ejs      mxs         ppcag           bg0900              bg0900                                -                                                                                                                                 Marek Vasut <marex@denx.de>
 Active  arm         arm926ejs      mxs         sandisk         sansa_fuze_plus     sansa_fuze_plus                       -                                                                                                                                 Marek Vasut <marek.vasut@gmail.com>
@@ -320,14 +321,11 @@ Active  arm         armv7          mx6         embest          mx6boards
 Active  arm         armv7          mx6         embest          mx6boards           riotboard                             embestmx6boards:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6s1g.cfg,MX6S,DDR_MB=1024,ENV_IS_IN_MMC                              Eric Bénard <eric@eukrea.com>
 Active  arm         armv7          mx6         freescale       mx6qarm2            mx6qarm2                              mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg                                                                         Jason Liu <r64343@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6qsabreauto       mx6qsabreauto                         mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q                                                          Fabio Estevam <fabio.estevam@freescale.com>
+Active  arm         armv7          mx6         freescale       mx6qsabreauto       mx6dlsabreauto                        mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL            Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6sabresd          mx6dlsabresd                          mx6sabresd:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL                                                             Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6sabresd          mx6qsabresd                           mx6sabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg,MX6Q                                                           Fabio Estevam <fabio.estevam@freescale.com>
 Active  arm         armv7          mx6         freescale       mx6slevk            mx6slevk                              mx6slevk:IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL                                                                   Fabio Estevam <fabio.estevam@freescale.com>
-Active  arm         armv7          mx6         gateworks       gw_ventana          gwventanadl                           gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=512                                                  Tim Harvey <tharvey@gateworks.com>
-Active  arm         armv7          mx6         gateworks       gw_ventana          gwventanadl1g                         gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6DL,DDR_MB=1024                                                 Tim Harvey <tharvey@gateworks.com>
-Active  arm         armv7          mx6         gateworks       gw_ventana          gwventanaq                            gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=512                                                   Tim Harvey <tharvey@gateworks.com>
-Active  arm         armv7          mx6         gateworks       gw_ventana          gwventanaq1g                          gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=1024                                                  Tim Harvey <tharvey@gateworks.com>
-Active  arm         armv7          mx6         gateworks       gw_ventana          gwventanaq1gspi                       gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6Q,DDR_MB=1024,SPI_FLASH                                        Tim Harvey <tharvey@gateworks.com>
+Active  arm         armv7          mx6         gateworks       gw_ventana          gwventana                            gw_ventana:IMX_CONFIG=board/gateworks/gw_ventana/gw_ventana.cfg,MX6QDL,SPL                                                  Tim Harvey <tharvey@gateworks.com>
 Active  arm         armv7          mx6         solidrun        hummingboard        hummingboard_solo                     hummingboard:IMX_CONFIG=board/solidrun/hummingboard/solo.cfg,MX6S,DDR_MB=512                                                      Jon Nettleton <jon.nettleton@gmail.com>
 Active  arm         armv7          omap3       -               overo               omap3_overo                           -                                                                                                                                 Steve Sakoman <sakoman@gmail.com>
 Active  arm         armv7          omap3       -               pandora             omap3_pandora                         -                                                                                                                                 Grazvydas Ignotas <notasas@gmail.com>
diff --git a/doc/README.mxs b/doc/README.mxs
index 0235a5aeafad2b925e7b6dad08e0bc35e5e423bb..ed2e5688562ac1af55a7c6213f5f3eb825e055b8 100644
--- a/doc/README.mxs
+++ b/doc/README.mxs
@@ -23,6 +23,7 @@ Contents
 2) Compiling U-Boot for a MXS based board
 3) Installation of U-Boot for a MXS based board to SD card
 4) Installation of U-Boot into NAND flash on a MX28 based board
+5) Installation of U-boot into SPI NOR flash on a MX28 based board
 
 1) Prerequisites
 ----------------
@@ -262,3 +263,28 @@ There are two possibilities when preparing an image writable to NAND flash.
 	   In case the user needs to boot a firmware image bigger than 1Mb, the
 	   user has to adjust the "update_nand_firmware_maxsz" variable for the
 	   update scripts to work properly.
+
+5) Installation of U-Boot into SPI NOR flash on a MX28 based board
+------------------------------------------------------------------
+
+The u-boot.sb file can be directly written to SPI NOR from U-boot prompt.
+
+Load u-boot.sb into RAM, this can be done in several ways and one way is to use
+tftp:
+       => tftp u-boot.sb 0x42000000
+
+Probe the SPI NOR flash:
+       => sf probe
+
+(SPI NOR should be succesfully detected in this step)
+
+Erase the blocks where U-boot binary will be written to:
+       => sf erase 0x0 0x80000
+
+Write u-boot.sb to SPI NOR:
+       => sf write 0x42000000 0 0x80000
+
+Power off the board and set the boot mode DIP switches to boot from the SPI NOR
+according to MX28 manual section 12.2.1 (Table 12-2)
+
+Last step is to power up the board and U-boot should start from SPI NOR.
diff --git a/drivers/block/dwc_ahsata.c b/drivers/block/dwc_ahsata.c
index 3569214297a1ab6aec580e744d042ed8146ed371..15d65d77f3a180262691b20b9bfa8d915b346866 100644
--- a/drivers/block/dwc_ahsata.c
+++ b/drivers/block/dwc_ahsata.c
@@ -17,6 +17,7 @@
 #include <asm/io.h>
 #include <linux/bitops.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
 #include "dwc_ahsata.h"
 
 struct sata_port_regs {
@@ -558,6 +559,10 @@ int init_sata(int dev)
 	u32 linkmap;
 	struct ahci_probe_ent *probe_ent = NULL;
 
+#if defined(CONFIG_MX6)
+	if (!is_cpu_type(MXC_CPU_MX6Q) && !is_cpu_type(MXC_CPU_MX6D))
+		return 1;
+#endif
 	if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) {
 		printf("The sata index %d is out of ranges\n\r", dev);
 		return -1;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4eb354da93a17b9f551bf5a8caf0a245d5b32d31..bf1312a373a7a559362081cbe63c719c297065fd 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -68,5 +68,6 @@ else  # minimal SPL drivers
 obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
 obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
 
 endif # drivers
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
new file mode 100644
index 0000000000000000000000000000000000000000..0e7c364a220ca9d0dacd2b1c72fbd5ba06d4fb2a
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -0,0 +1,231 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <common.h>
+#include <nand.h>
+#include <malloc.h>
+
+static nand_info_t mtd;
+static struct nand_chip nand_chip;
+
+static void mxs_nand_command(struct mtd_info *mtd, unsigned int command,
+			     int column, int page_addr)
+{
+	register struct nand_chip *chip = mtd->priv;
+	u32 timeo, time_start;
+
+	/* write out the command to the device */
+	chip->cmd_ctrl(mtd, command, NAND_CLE);
+
+	/* Serially input address */
+	if (column != -1) {
+		chip->cmd_ctrl(mtd, column, NAND_ALE);
+		chip->cmd_ctrl(mtd, column >> 8, NAND_ALE);
+	}
+	if (page_addr != -1) {
+		chip->cmd_ctrl(mtd, page_addr, NAND_ALE);
+		chip->cmd_ctrl(mtd, page_addr >> 8, NAND_ALE);
+		/* One more address cycle for devices > 128MiB */
+		if (chip->chipsize > (128 << 20))
+			chip->cmd_ctrl(mtd, page_addr >> 16, NAND_ALE);
+	}
+	chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+
+	if (command == NAND_CMD_READ0) {
+		chip->cmd_ctrl(mtd, NAND_CMD_READSTART, NAND_CLE);
+		chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0);
+	}
+
+	/* wait for nand ready */
+	ndelay(100);
+	timeo = (CONFIG_SYS_HZ * 20) / 1000;
+	time_start = get_timer(0);
+	while (get_timer(time_start) < timeo) {
+		if (chip->dev_ready(mtd))
+			break;
+	}
+}
+
+static int mxs_flash_ident(struct mtd_info *mtd)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int i;
+	u8 mfg_id, dev_id;
+	u8 id_data[8];
+	struct nand_onfi_params *p = &chip->onfi_params;
+
+	/* Reset the chip */
+	chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+	/* Send the command for reading device ID */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+	/* Read manufacturer and device IDs */
+	mfg_id = chip->read_byte(mtd);
+	dev_id = chip->read_byte(mtd);
+
+	/* Try again to make sure */
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+	for (i = 0; i < 8; i++)
+		id_data[i] = chip->read_byte(mtd);
+	if (id_data[0] != mfg_id || id_data[1] != dev_id) {
+		printf("second ID read did not match");
+		return -1;
+	}
+	debug("0x%02x:0x%02x ", mfg_id, dev_id);
+
+	/* read ONFI */
+	chip->onfi_version = 0;
+	chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+	if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+	    chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I') {
+		return -2;
+	}
+
+	/* we have ONFI, probe it */
+	chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+	chip->read_buf(mtd, (uint8_t *)p, sizeof(*p));
+	mtd->name = p->model;
+	mtd->writesize = le32_to_cpu(p->byte_per_page);
+	mtd->erasesize = le32_to_cpu(p->pages_per_block) * mtd->writesize;
+	mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+	chip->chipsize = le32_to_cpu(p->blocks_per_lun);
+	chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+	/* Calculate the address shift from the page size */
+	chip->page_shift = ffs(mtd->writesize) - 1;
+	chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
+	/* Convert chipsize to number of pages per chip -1 */
+	chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+	chip->badblockbits = 8;
+
+	debug("erasesize=%d (>>%d)\n", mtd->erasesize, chip->phys_erase_shift);
+	debug("writesize=%d (>>%d)\n", mtd->writesize, chip->page_shift);
+	debug("oobsize=%d\n", mtd->oobsize);
+	debug("chipsize=%lld\n", chip->chipsize);
+
+	return 0;
+}
+
+static int mxs_read_page_ecc(struct mtd_info *mtd, void *buf, unsigned int page)
+{
+	register struct nand_chip *chip = mtd->priv;
+	int ret;
+
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page);
+	ret = nand_chip.ecc.read_page(mtd, chip, buf, 1, page);
+	if (ret < 0) {
+		printf("read_page failed %d\n", ret);
+		return -1;
+	}
+	return 0;
+}
+
+static int is_badblock(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+	register struct nand_chip *chip = mtd->priv;
+	unsigned int block = offs >> chip->phys_erase_shift;
+	unsigned int page = offs >> chip->page_shift;
+
+	debug("%s offs=0x%08x block:%d page:%d\n", __func__, (int)offs, block,
+	      page);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+	memset(chip->oob_poi, 0, mtd->oobsize);
+	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return chip->oob_poi[0] != 0xff;
+}
+
+/* setup mtd and nand structs and init mxs_nand driver */
+static int mxs_nand_init(void)
+{
+	/* return if already initalized */
+	if (nand_chip.numchips)
+		return 0;
+
+	/* init mxs nand driver */
+	board_nand_init(&nand_chip);
+	mtd.priv = &nand_chip;
+	/* set mtd functions */
+	nand_chip.cmdfunc = mxs_nand_command;
+	nand_chip.numchips = 1;
+
+	/* identify flash device */
+	puts("NAND : ");
+	if (mxs_flash_ident(&mtd)) {
+		printf("Failed to identify\n");
+		return -1;
+	}
+
+	/* allocate and initialize buffers */
+	nand_chip.buffers = memalign(ARCH_DMA_MINALIGN,
+				     sizeof(*nand_chip.buffers));
+	nand_chip.oob_poi = nand_chip.buffers->databuf + mtd.writesize;
+	/* setup flash layout (does not scan as we override that) */
+	mtd.size = nand_chip.chipsize;
+	nand_chip.scan_bbt(&mtd);
+
+	printf("%llu MiB\n", (mtd.size / (1024 * 1024)));
+	return 0;
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *buf)
+{
+	struct nand_chip *chip;
+	unsigned int page;
+	unsigned int nand_page_per_block;
+	unsigned int sz = 0;
+
+	if (mxs_nand_init())
+		return -ENODEV;
+	chip = mtd.priv;
+	page = offs >> chip->page_shift;
+	nand_page_per_block = mtd.erasesize / mtd.writesize;
+
+	debug("%s offset:0x%08x len:%d page:%d\n", __func__, offs, size, page);
+
+	size = roundup(size, mtd.writesize);
+	while (sz < size) {
+		if (mxs_read_page_ecc(&mtd, buf, page) < 0)
+			return -1;
+		sz += mtd.writesize;
+		offs += mtd.writesize;
+		page++;
+		buf += mtd.writesize;
+
+		/*
+		 * Check if we have crossed a block boundary, and if so
+		 * check for bad block.
+		 */
+		if (!(page % nand_page_per_block)) {
+			/*
+			 * Yes, new block. See if this block is good. If not,
+			 * loop until we find a good block.
+			 */
+			while (is_badblock(&mtd, offs, 1)) {
+				page = page + nand_page_per_block;
+				/* Check i we've reached the end of flash. */
+				if (page >= mtd.size >> chip->page_shift)
+					return -ENOMEM;
+			}
+		}
+	}
+
+	return 0;
+}
+
+int nand_default_bbt(struct mtd_info *mtd)
+{
+	return 0;
+}
+
+void nand_init(void)
+{
+}
+
+void nand_deselect(void)
+{
+}
+
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index 56bee55208e0acd0fced0ee0149a404786abc67a..313d560afce8635f3b1f29c3ea029173b69f8c40 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -77,7 +77,7 @@
 #define  UCR3_DSR        (1<<10) /* Data set ready */
 #define  UCR3_DCD        (1<<9)  /* Data carrier detect */
 #define  UCR3_RI         (1<<8)  /* Ring indicator */
-#define  UCR3_TIMEOUTEN  (1<<7)  /* Timeout interrupt enable */
+#define  UCR3_ADNIMP     (1<<7)  /* Autobaud Detection Not Improved */
 #define  UCR3_RXDSEN	 (1<<6)  /* Receive status interrupt enable */
 #define  UCR3_AIRINTEN   (1<<5)  /* Async IR wake interrupt enable */
 #define  UCR3_AWAKEN	 (1<<4)  /* Async wake interrupt enable */
@@ -186,7 +186,7 @@ static int mxc_serial_init(void)
 
 	while (!(__REG(UART_PHYS + UCR2) & UCR2_SRST));
 
-	__REG(UART_PHYS + UCR3) = 0x0704;
+	__REG(UART_PHYS + UCR3) = 0x0704 | UCR3_ADNIMP;
 	__REG(UART_PHYS + UCR4) = 0x8000;
 	__REG(UART_PHYS + UESC) = 0x002b;
 	__REG(UART_PHYS + UTIM) = 0x0;
diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h
index eb91c44e3ff7b844ac84bccf45c2b1ddb2ac2c5b..f1000f37fac25d5b4c503fa0a39cf92ea111de70 100644
--- a/include/configs/embestmx6boards.h
+++ b/include/configs/embestmx6boards.h
@@ -20,7 +20,7 @@
 #include <linux/sizes.h>
 
 #define CONFIG_MXC_UART_BASE		UART2_BASE
-#define CONFIG_CONSOLE_DEV		"ttymxc0"
+#define CONFIG_CONSOLE_DEV		"ttymxc1"
 #define CONFIG_MMCROOT			"/dev/mmcblk1p2"
 
 #define PHYS_SDRAM_SIZE		(1u * 1024 * 1024 * 1024)
@@ -293,7 +293,7 @@
 
 #if defined(CONFIG_ENV_IS_IN_MMC)
 /* RiOTboard */
-#define CONFIG_DEFAULT_FDT_FILE	"imx6s-riotboard.dtb"
+#define CONFIG_DEFAULT_FDT_FILE	"imx6dl-riotboard.dtb"
 #define CONFIG_SYS_FSL_USDHC_NUM	3
 #define CONFIG_SYS_MMC_ENV_DEV		2	/* SDHC4 */
 #define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index f41c96ea7fbcd789ec4cae0b83aea3d56542defa..8197a726742af7e6004529366e7e632212a5f2b0 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -7,6 +7,17 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+/*
+#define CONFIG_SPL_SATA_SUPPORT
+*/
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
+
+#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
 #include "mx6_common.h"
 #define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
new file mode 100644
index 0000000000000000000000000000000000000000..6fdc438f951800d7f7b745bd01b6021d663ef322
--- /dev/null
+++ b/include/configs/imx6_spl.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2014 Gateworks Corporation
+ * Author: Tim Harvey <tharvey@gateworks.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+#ifndef __IMX6_SPL_CONFIG_H
+#define __IMX6_SPL_CONFIG_H
+
+#ifdef CONFIG_SPL
+
+#define CONFIG_SPL_FRAMEWORK
+
+/*
+ * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
+ *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
+ *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
+ *  - BOOT ROM stack is at 0x0091FFB8
+ *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
+ *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
+ *    fit between 0x00907000 and 0x00918000.
+ *  - Additionally the BOOT ROM loads what they consider the firmware image
+ *    which consists of a 4K header in front of us that contains the IVT, DCD
+ *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
+ *    or 64KB
+ */
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SPL_TEXT_BASE		0x00908000
+#define CONFIG_SPL_MAX_SIZE		(64 * 1024)
+#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/armv7"
+#define CONFIG_SPL_STACK		0x0091FFB8
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_GPIO_SUPPORT
+
+/* NAND support */
+#if defined(CONFIG_SPL_NAND_SUPPORT)
+#define CONFIG_SPL_NAND_MXS
+#define CONFIG_SPL_DMA_SUPPORT
+#endif
+
+/* MMC support */
+#if defined(CONFIG_SPL_MMC_SUPPORT)
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	138 /* offset 69KB */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	800 /* 400 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION	1
+#define CONFIG_SYS_MONITOR_LEN  (CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS/2*1024)
+#endif
+
+/* SATA support */
+#if defined(CONFIG_SPL_SATA_SUPPORT)
+#define CONFIG_SPL_SATA_BOOT_DEVICE		0
+#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
+#endif
+
+/* Define the payload for FAT/EXT support */
+#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME  "u-boot.img"
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#endif
+
+#define CONFIG_SPL_BSS_START_ADDR	0x18200000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x100000	/* 1 MB */
+#define CONFIG_SYS_SPL_MALLOC_START	0x18300000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x3200000	/* 50 MB */
+#define CONFIG_SYS_TEXT_BASE		0x17800000
+#endif
+
+#endif
diff --git a/include/configs/m53evk.h b/include/configs/m53evk.h
index f40147025152fa2225d55dfdacec8cd4a3b6bdf4..0f2a3ac07237ec6609f39b00bb9d9096f750526b 100644
--- a/include/configs/m53evk.h
+++ b/include/configs/m53evk.h
@@ -9,6 +9,7 @@
 #define __M53EVK_CONFIG_H__
 
 #define CONFIG_MX53
+#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_MXC_GPIO
 
 #include <asm/arch/imx-regs.h>
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 9b9124ac14101d8835a0e42013b400b0f244bd8e..9daa0bf540060ecdbde69496015a8a18a0949659 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -48,7 +48,11 @@
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
 /* Environment */
+#ifndef CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE			(16 * 1024)
+#else
+#define CONFIG_ENV_SIZE			(4 * 1024)
+#endif
 #define CONFIG_ENV_OVERWRITE
 
 /* Environment is in MMC */
@@ -70,7 +74,6 @@
 /* Environemnt is in SPI flash */
 #if defined(CONFIG_CMD_SF) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SIZE			0x1000		/* 4KB */
 #define CONFIG_ENV_OFFSET		0x40000		/* 256K */
 #define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #define CONFIG_ENV_SECT_SIZE		0x1000
diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h
index 8a8920f6cc8adebb6113bc8d6476bb50055e170d..e4a5cc5be1a690583782e4af887d095e7e77b1f2 100644
--- a/include/configs/mx6_common.h
+++ b/include/configs/mx6_common.h
@@ -17,7 +17,6 @@
 #ifndef __MX6_COMMON_H
 #define __MX6_COMMON_H
 
-#define CONFIG_ARM_ERRATA_742230
 #define CONFIG_ARM_ERRATA_743622
 #define CONFIG_ARM_ERRATA_751472
 #define CONFIG_ARM_ERRATA_794072
diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h
index bd0144f5cb49ae9a060a64230c93cad831e95618..d1639c4c761fc9b1512bbce23ae2032f7cd17f9b 100644
--- a/include/configs/mx6qsabreauto.h
+++ b/include/configs/mx6qsabreauto.h
@@ -12,7 +12,11 @@
 #define CONFIG_MACH_TYPE	3529
 #define CONFIG_MXC_UART_BASE	UART4_BASE
 #define CONFIG_CONSOLE_DEV		"ttymxc3"
+#if defined CONFIG_MX6Q
 #define CONFIG_DEFAULT_FDT_FILE	"imx6q-sabreauto.dtb"
+#elif defined CONFIG_MX6DL
+#define CONFIG_DEFAULT_FDT_FILE	"imx6dl-sabreauto.dtb"
+#endif
 #define CONFIG_MMCROOT			"/dev/mmcblk0p2"
 #define PHYS_SDRAM_SIZE		(2u * 1024 * 1024 * 1024)
 
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 0fa6573c7f15189820067fae83339c4e9b411608..e666ebb9984ab8de88a9a103e35ed8be54829529 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -59,4 +59,16 @@
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(3, 19)
 #endif
 
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_SPEED		  100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+
 #endif                         /* __MX6QSABRESD_CONFIG_H */
diff --git a/include/power/pfuze100_pmic.h b/include/power/pfuze100_pmic.h
index 444aba6c66159bf3ebdee307ec2565ceb1b7c413..0002f1e6029c8f58aea69ddfadfdf5e2abde267a 100644
--- a/include/power/pfuze100_pmic.h
+++ b/include/power/pfuze100_pmic.h
@@ -15,7 +15,11 @@ enum {
 	PFUZE100_FABID		= 0x04,
 
 	PFUZE100_SW1ABVOL	= 0x20,
+	PFUZE100_SW1ABSTBY	= 0x21,
+	PUZE_100_SW1ABCONF	= 0x24,
 	PFUZE100_SW1CVOL	= 0x2e,
+	PFUZE100_SW1CSTBY	= 0x2f,
+	PFUZE100_SW1CCONF	= 0x32,
 	PFUZE100_SW2VOL		= 0x35,
 	PFUZE100_SW3AVOL	= 0x3c,
 	PFUZE100_SW3BVOL	= 0x43,