diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index ec75383dea69008890132e5258cdc5abdde69e41..2d5ddf012b6b3a27c370e0bc3c65ad94c87e77d0 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -319,6 +319,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	if (IS_SVR_REV(svr, 1, 0))
 		puts("Work-around for Erratum A-008044 enabled\n");
 #endif
+#if defined(CONFIG_SYS_FSL_B4860QDS_XFI_ERR) && defined(CONFIG_B4860QDS)
+	puts("Work-around for Erratum XFI on B4860QDS enabled\n");
+#endif
+
 	return 0;
 }
 
diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c
index c99c26680e323df4a9e797b2060666fb587019e6..6a8fca61a0d451b6c407c87a3397bde2f1557eaa 100644
--- a/board/freescale/b4860qds/b4860qds.c
+++ b/board/freescale/b4860qds/b4860qds.c
@@ -548,6 +548,18 @@ int configure_vsc3316_3308(void)
 
 			if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2",
 						  "sfp_amc", "sfp", buf)) {
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+				/* change default VSC3308 for XFI erratum */
+				ret = vsc3308_config_adjust(VSC3308_TX_ADDRESS,
+						vsc08_tx_sfp, num_vsc08_con);
+				if (ret)
+					return ret;
+
+				ret = vsc3308_config_adjust(VSC3308_RX_ADDRESS,
+						vsc08_rx_sfp, num_vsc08_con);
+				if (ret)
+					return ret;
+#else
 				ret = vsc3308_config(VSC3308_TX_ADDRESS,
 						vsc08_tx_sfp, num_vsc08_con);
 				if (ret)
@@ -557,6 +569,7 @@ int configure_vsc3316_3308(void)
 						vsc08_rx_sfp, num_vsc08_con);
 				if (ret)
 					return ret;
+#endif
 			} else {
 				ret = vsc3308_config(VSC3308_TX_ADDRESS,
 						vsc08_tx_amc, num_vsc08_con);
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
index 97a25e838ed414080c7140baba7e6e4ebcf63b0d..dd9c37ebe8faf938b3a8244cb1fe7a1ac3b0ecc6 100644
--- a/board/freescale/common/vsc3316_3308.c
+++ b/board/freescale/common/vsc3316_3308.c
@@ -13,7 +13,12 @@
 #define INPUT_STATE_REG		0x13
 #define GLOBAL_INPUT_ISE1		0x51
 #define GLOBAL_INPUT_ISE2		0x52
+#define GLOBAL_INPUT_GAIN		0x53
 #define GLOBAL_INPUT_LOS		0x55
+#define GLOBAL_OUTPUT_PE1		0x56
+#define GLOBAL_OUTPUT_PE2		0x57
+#define GLOBAL_OUTPUT_LEVEL		0x58
+#define GLOBAL_OUTPUT_TERMINATION	0x5A
 #define GLOBAL_CORE_CNTRL		0x5D
 #define OUTPUT_MODE_PAGE		0x23
 #define CORE_CONTROL_PAGE		0x25
@@ -92,6 +97,109 @@ int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
 	return 0;
 }
 
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con)
+{
+	unsigned int i;
+	u8 rev_id = 0;
+	int ret;
+
+	debug("VSC:Initializing VSC3308 at I2C address 0x%x for Tx\n",
+	      vsc_addr);
+
+	ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+	if (ret < 0) {
+		printf("VSC:0x%x could not read REV_ID from device.\n",
+		       vsc_addr);
+		return ret;
+	}
+
+	if (rev_id != 0xab) {
+		printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+		       vsc_addr);
+		return -ENODEV;
+	}
+
+	ret = vsc_if_enable(vsc_addr);
+	if (ret) {
+		printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+		       vsc_addr);
+		return ret;
+	}
+
+	/* config connections - page 0x00 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+	/* Configure Global Input ISE */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0);
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0);
+
+	/* Configure Tx/Rx Global Output PE1 */
+	i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE1, 0);
+
+	/* Configure Tx/Rx Global Output PE2 */
+	i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_PE2, 0);
+
+	/* Configure Tx/Rx Global Input GAIN */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_GAIN, 0x3F);
+
+	/* Setting Global Input LOS threshold value */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0xE0);
+
+	/* Setting Global output termination */
+	i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_TERMINATION, 0);
+
+	/* Configure Tx/Rx Global Output level */
+	if (vsc_addr == VSC3308_TX_ADDRESS)
+		i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 4);
+	else
+		i2c_reg_write(vsc_addr, GLOBAL_OUTPUT_LEVEL, 2);
+
+	/* Making crosspoint connections, by connecting required
+	 * input to output */
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+	/* input state - page 0x13 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+	/* Turning off all the required input of the switch */
+	for (i = 0; i < num_con; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][0], 1);
+
+	/* only turn on specific Tx/Rx requested by the XFI erratum */
+	if (vsc_addr == VSC3308_TX_ADDRESS) {
+		i2c_reg_write(vsc_addr, 2, 0);
+		i2c_reg_write(vsc_addr, 3, 0);
+	} else {
+		i2c_reg_write(vsc_addr, 0, 0);
+		i2c_reg_write(vsc_addr, 1, 0);
+	}
+
+	/* config output mode - page 0x23 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+	/* Turn off the Output driver correspond to required output*/
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr,  con_arr[i][1], 1);
+
+	/* only turn on specific Tx/Rx requested by the XFI erratum */
+	if (vsc_addr == VSC3308_TX_ADDRESS) {
+		i2c_reg_write(vsc_addr, 0, 0);
+		i2c_reg_write(vsc_addr, 1, 0);
+	} else {
+		i2c_reg_write(vsc_addr, 3, 0);
+		i2c_reg_write(vsc_addr, 4, 0);
+	}
+
+	/* configure global core control register, Turn on Global core power */
+	i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+	vsc_wp_config(vsc_addr);
+
+	return 0;
+}
+#endif
+
 int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
 		unsigned int num_con)
 {
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
index 2a491877792fdeef574a66929da6f692f9cccb7c..d722ea39d68e0eddae75770fa75652fff7e1f0e3 100644
--- a/board/freescale/common/vsc3316_3308.h
+++ b/board/freescale/common/vsc3316_3308.h
@@ -14,6 +14,10 @@
 int vsc_if_enable(unsigned int vsc_addr);
 int vsc3316_config(unsigned int vsc_addr, int8_t con_arr[][2],
 		unsigned int num_con);
+#ifdef CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+int vsc3308_config_adjust(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con);
+#endif
 int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
 		unsigned int num_con);
 void vsc_wp_config(unsigned int vsc_addr);
diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h
index b47b9decaacafa64bf470423cdfa359aa2c417cc..9e8e319cf703a6b476f6c99021d49adbe2ba1529 100644
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@@ -731,6 +731,8 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
 #endif
 
+#define CONFIG_SYS_FSL_B4860QDS_XFI_ERR
+
 /*
  * Environment
  */