diff --git a/Makefile b/Makefile
index 2d825b9c41a6c4c595e2015b46c34e2fc79a918a..5fa14789d99f7f265385029fa55954a9157e05ae 100644
--- a/Makefile
+++ b/Makefile
@@ -1191,8 +1191,13 @@ u-boot-x86-16bit.bin: u-boot FORCE
 endif
 
 ifneq ($(CONFIG_ARCH_SUNXI),)
+ifeq ($(CONFIG_ARM64),)
 u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
 	$(call if_changed,binman)
+else
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.itb FORCE
+	$(call if_changed,cat)
+endif
 endif
 
 ifneq ($(CONFIG_TEGRA),)
diff --git a/board/sunxi/README.sunxi64 b/board/sunxi/README.sunxi64
index c492f749b8bbe3a7418f29fa4050dee9251c64fb..5a363d27b8addb370d81cd2d46a4a09c4695ba90 100644
--- a/board/sunxi/README.sunxi64
+++ b/board/sunxi/README.sunxi64
@@ -95,9 +95,8 @@ Transfer the SPL and the U-Boot FIT image directly to an uSD card:
 (replace /dev/sdx with you SD card device file name, which could be
 /dev/mmcblk[x] as well).
 
-Alternatively you can concatenate the SPL and the U-Boot FIT image into a
+Alternatively you can use the SPL and the U-Boot FIT image combined into a
 single file and transfer that instead:
-$ cat spl/sunxi-spl.bin u-boot.itb > u-boot-sunxi-with-spl.bin
 # dd if=u-boot-sunxi-with-spl.bin of=/dev/sdx bs=8k seek=1
 
 You can partition the microSD card, but leave the first MB unallocated (most