From aea5eee126eab0d49fd52da212e51d83749d30e7 Mon Sep 17 00:00:00 2001
From: "Jens Scharsig (BuS Elektronik)" <esw@bus-elektronik.de>
Date: Wed, 16 Jan 2013 08:24:10 +0100
Subject: [PATCH] m68k: fix debug call befor serial init
There is a debug call in board.c befor serial interface was initialized.
This moves the debug code behind serial_initialize call.
Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
---
arch/m68k/lib/board.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index b2e30683641..efc9fccc1bc 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -403,14 +403,14 @@ void board_init_r (gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
- debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-
WATCHDOG_RESET ();
gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE;
serial_initialize();
+ debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
+
monitor_flash_len = (ulong)&__init_end - dest_addr;
#if defined(CONFIG_NEEDS_MANUAL_RELOC)
--
GitLab