From 86ecae7b37d4714ad8b87f1c52e0252725ae2f27 Mon Sep 17 00:00:00 2001
From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Mon, 13 Jun 2016 16:40:27 -0700
Subject: [PATCH] hp: initial addition, Boundary Devices board
hp: add VD_AFK1024600A02
hp: add tx enable for rs485
hp: add CONFIG_SPI_FLASH_SPANSION
hp: initialize otg network always
hp: add hp_s512m_defconfig
hp: hp_defconfig add CONFIG_BLOCK_CACHE
hp_s512m: hp_s512m_defconfig add CONFIG_BLOCK_CACHE
hp: add hp_q1g_defconfig
hp: use common code for eth init
hp: eth.c now in common directory
hp: move misc_init_r/do_kbd to common
hp: move mmc_init/ dram_init/ overwrite_console/ common_board_init/ splash_screen_prepare/ board_cfb_skip to common
hp: use common 1066mhz_4x128mx16.cfg
hp: add CONFIG_SPI_FLASH_GIGADEVICE: to defconfigs
hp: 800mhz_2x128mx16.cfg: remove _P1 accesses
hp: 800mhz_2x128mx16.cfg: use common values
CFG0: 0x40435323 to 0x3f435333
tRFC - 65 to 64 clocks
tFAW - 19 to 20 clocks
CFG1: 0xB66E8D63 to 0xb68e8b63
tRC from 20 to 21 clocks
tWR from 7 to 6 clocks
MR0: 0x13208030 to 0x15208030
tWR from 5 to 6 clocks
hp: use common ddr scripts
hp: check otg_power_detect before enabling otg_vbus
hp: ensure otg cable not connected before allowing boot
hp: port to v2018.07
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
hp: update to v2017.01
hp: update to v2017.03
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
---
arch/arm/mach-imx/mx6/Kconfig | 4 +
board/boundary/hp/Kconfig | 24 ++
board/boundary/hp/MAINTAINERS | 9 +
board/boundary/hp/Makefile | 7 +
board/boundary/hp/hp.c | 564 +++++++++++++++++++++++++++++++++
board/boundary/hp/hp.cfg | 47 +++
board/boundary/hp/hp_q1g.cfg | 47 +++
board/boundary/hp/hp_s512m.cfg | 41 +++
configs/hp_defconfig | 71 +++++
configs/hp_q1g_defconfig | 71 +++++
configs/hp_s512m_defconfig | 71 +++++
include/configs/hp.h | 25 ++
12 files changed, 981 insertions(+)
create mode 100644 board/boundary/hp/Kconfig
create mode 100644 board/boundary/hp/MAINTAINERS
create mode 100644 board/boundary/hp/Makefile
create mode 100644 board/boundary/hp/hp.c
create mode 100644 board/boundary/hp/hp.cfg
create mode 100644 board/boundary/hp/hp_q1g.cfg
create mode 100644 board/boundary/hp/hp_s512m.cfg
create mode 100644 configs/hp_defconfig
create mode 100644 configs/hp_q1g_defconfig
create mode 100644 configs/hp_s512m_defconfig
create mode 100644 include/configs/hp.h
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index 01c9aa7ba8d..bcde394bcec 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -410,6 +410,9 @@ config TARGET_H4
config TARGET_HL
bool "hl"
+config TARGET_HP
+ bool "hp"
+
config TARGET_NITROGEN6X
bool "nitrogen6x"
imply USB_HOST_ETHER
@@ -569,6 +572,7 @@ source "board/boundary/eo/Kconfig"
source "board/boundary/h/Kconfig"
source "board/boundary/h4/Kconfig"
source "board/boundary/hl/Kconfig"
+source "board/boundary/hp/Kconfig"
source "board/boundary/nitrogen6x/Kconfig"
source "board/boundary/ys/Kconfig"
source "board/bticino/mamoj/Kconfig"
diff --git a/board/boundary/hp/Kconfig b/board/boundary/hp/Kconfig
new file mode 100644
index 00000000000..7bc73c1e724
--- /dev/null
+++ b/board/boundary/hp/Kconfig
@@ -0,0 +1,24 @@
+if TARGET_HP
+
+config SYS_CPU
+ default "armv7"
+
+config SYS_BOARD
+ default "hp"
+
+config SYS_VENDOR
+ default "boundary"
+
+config SYS_SOC
+ default "mx6"
+
+config SYS_CONFIG_NAME
+ default "hp"
+
+config ENV_WLMAC
+ bool
+ default y
+
+source "board/boundary/common/Kconfig"
+
+endif
diff --git a/board/boundary/hp/MAINTAINERS b/board/boundary/hp/MAINTAINERS
new file mode 100644
index 00000000000..f6074a3a467
--- /dev/null
+++ b/board/boundary/hp/MAINTAINERS
@@ -0,0 +1,9 @@
+NITROGEN6_MAX BOARD
+M: Troy Kisky <troy.kisky@boundarydevices.com>
+S: Maintained
+F: board/boundary/hp/
+F: include/configs/hp.h
+F: configs/hp_defconfig
+F: configs/hp_q1g_defconfig
+F: configs/hp_s512m_defconfig
+
diff --git a/board/boundary/hp/Makefile b/board/boundary/hp/Makefile
new file mode 100644
index 00000000000..8dc3bb9c48e
--- /dev/null
+++ b/board/boundary/hp/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016, Boundary Devices <info@boundarydevices.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := hp.o
diff --git a/board/boundary/hp/hp.c b/board/boundary/hp/hp.c
new file mode 100644
index 00000000000..5d67ca7695e
--- /dev/null
+++ b/board/boundary/hp/hp.c
@@ -0,0 +1,564 @@
+/*
+ * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
+ * Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/sys_proto.h>
+#include <malloc.h>
+#include <asm/arch/mx6-pins.h>
+#include <linux/errno.h>
+#include <asm/gpio.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/fbpanel.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/spi.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <i2c.h>
+#include <input.h>
+#include <splash.h>
+#include <usb/ehci-ci.h>
+#include "../common/bd_common.h"
+#include "../common/padctrl.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define AUD_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
+#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
+ PAD_CTL_ODE | PAD_CTL_SRE_FAST)
+
+#define RGB_PAD_CTRL PAD_CTL_DSE_120ohm
+
+#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+ PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+/* micro sd - 3.3v - 80ohm @ 1.8v settings is 40ohm at 3.3v */
+#define USDHC1_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+/* wifi - 1.8v */
+#define USDHC2_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+/* eMMC - 1.8v */
+#define USDHC4_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
+ PAD_CTL_SPEED_LOW | PAD_CTL_DSE_40ohm | \
+ PAD_CTL_HYS | PAD_CTL_SRE_FAST)
+
+/*
+ *
+ */
+static const iomux_v3_cfg_t init_pads[] = {
+ /* AUDMUX */
+ IOMUX_PAD_CTRL(CSI0_DAT7__AUD3_RXD, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT4__AUD3_TXC, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT5__AUD3_TXD, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT6__AUD3_TXFS, AUD_PAD_CTRL),
+
+ IOMUX_PAD_CTRL(DISP0_DAT23__AUD4_RXD, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT19__AUD4_RXC, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT18__AUD4_RXFS, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT20__AUD4_TXC, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT21__AUD4_TXD, AUD_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT22__AUD4_TXFS, AUD_PAD_CTRL),
+
+ /* bt_rfkill */
+#define GP_BT_RFKILL_RESET IMX_GPIO_NR(6, 16)
+ IOMUX_PAD_CTRL(NANDF_CS3__GPIO6_IO16, WEAK_PULLDN),
+
+ /* ECSPI1 */
+ IOMUX_PAD_CTRL(EIM_D17__ECSPI1_MISO, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(EIM_D16__ECSPI1_SCLK, SPI_PAD_CTRL),
+#define GP_ECSPI1_NOR_CS IMX_GPIO_NR(3, 19)
+ IOMUX_PAD_CTRL(EIM_D19__GPIO3_IO19, WEAK_PULLUP),
+
+ /* ECSPI2 - J55 db */
+ IOMUX_PAD_CTRL(CSI0_DAT10__ECSPI2_MISO, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT9__ECSPI2_MOSI, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT8__ECSPI2_SCLK, SPI_PAD_CTRL),
+#define GP_ECSPI2_SS0 IMX_GPIO_NR(5, 29)
+ IOMUX_PAD_CTRL(CSI0_DAT11__GPIO5_IO29, WEAK_PULLUP),
+#define GP_ECSPI2_SS1 IMX_GPIO_NR(2, 27)
+ IOMUX_PAD_CTRL(EIM_LBA__GPIO2_IO27, WEAK_PULLUP),
+
+ /* ECSPI3 */
+ IOMUX_PAD_CTRL(DISP0_DAT2__ECSPI3_MISO, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT1__ECSPI3_MOSI, SPI_PAD_CTRL),
+ IOMUX_PAD_CTRL(DISP0_DAT0__ECSPI3_SCLK, SPI_PAD_CTRL),
+ /* ECSPI3_SS0 XR20M1170IL16-F - spi uart */
+#define GP_ECSPI3_UART IMX_GPIO_NR(4, 24)
+ IOMUX_PAD_CTRL(DISP0_DAT3__GPIO4_IO24, WEAK_PULLUP),
+
+ IOMUX_PAD_CTRL(NANDF_CS2__CCM_CLKO2, WEAK_PULLDN),
+#define GPIRQ_SPI_UART IMX_GPIO_NR(2, 1)
+ IOMUX_PAD_CTRL(NANDF_D1__GPIO2_IO01, WEAK_PULLUP),
+#define GP_SPI_UART_RESET IMX_GPIO_NR(2, 2)
+ IOMUX_PAD_CTRL(NANDF_D2__GPIO2_IO02, WEAK_PULLDN),
+
+ /* ENET pads that don't change for PHY reset */
+ IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, PAD_CTRL_ENET_MDIO),
+ IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, PAD_CTRL_ENET_MDC),
+ IOMUX_PAD_CTRL(RGMII_TXC__RGMII_TXC, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(RGMII_TD0__RGMII_TD0, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(RGMII_TD1__RGMII_TD1, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(RGMII_TD2__RGMII_TD2, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(RGMII_TD3__RGMII_TD3, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(RGMII_TX_CTL__RGMII_TX_CTL, PAD_CTRL_ENET_TX),
+ IOMUX_PAD_CTRL(ENET_REF_CLK__ENET_TX_CLK, PAD_CTRL_ENET_TX),
+ /* pin 42 PHY nRST */
+#define GP_RGMII_PHY_RESET IMX_GPIO_NR(1, 27)
+ IOMUX_PAD_CTRL(ENET_RXD0__GPIO1_IO27, WEAK_PULLDN),
+#define GPIRQ_ENET_PHY IMX_GPIO_NR(1, 28)
+ IOMUX_PAD_CTRL(ENET_TX_EN__GPIO1_IO28, WEAK_PULLUP),
+
+ /* FLEXCAN */
+ IOMUX_PAD_CTRL(KEY_COL2__FLEXCAN1_TX, WEAK_PULLUP),
+ IOMUX_PAD_CTRL(KEY_ROW2__FLEXCAN1_RX, WEAK_PULLUP),
+#define GP_FLEXCAN_STANDBY IMX_GPIO_NR(1, 2)
+ IOMUX_PAD_CTRL(GPIO_2__GPIO1_IO02, WEAK_PULLUP_OUTPUT),
+
+ /* GPIO Outputs */
+#define GP_GPO_1 IMX_GPIO_NR(3, 0)
+ IOMUX_PAD_CTRL(EIM_DA0__GPIO3_IO00, WEAK_PULLUP),
+#define GP_GPO_2 IMX_GPIO_NR(3, 1)
+ IOMUX_PAD_CTRL(EIM_DA1__GPIO3_IO01, WEAK_PULLUP),
+#define GP_GPO_3 IMX_GPIO_NR(3, 2)
+ IOMUX_PAD_CTRL(EIM_DA2__GPIO3_IO02, WEAK_PULLUP),
+#define GP_GPO_4 IMX_GPIO_NR(3, 3)
+ IOMUX_PAD_CTRL(EIM_DA3__GPIO3_IO03, WEAK_PULLUP),
+#define GP_GPO_5 IMX_GPIO_NR(3, 4)
+ IOMUX_PAD_CTRL(EIM_DA4__GPIO3_IO04, WEAK_PULLUP),
+#define GP_GPO_6 IMX_GPIO_NR(3, 5)
+ IOMUX_PAD_CTRL(EIM_DA5__GPIO3_IO05, WEAK_PULLUP),
+#define GP_GPO_7 IMX_GPIO_NR(3, 6)
+ IOMUX_PAD_CTRL(EIM_DA6__GPIO3_IO06, WEAK_PULLUP),
+#define GP_GPO_8 IMX_GPIO_NR(3, 7)
+ IOMUX_PAD_CTRL(EIM_DA7__GPIO3_IO07, WEAK_PULLUP),
+
+ /* GPIO Inputs */
+#define GP_GPI_1 IMX_GPIO_NR(3, 8)
+ IOMUX_PAD_CTRL(EIM_DA8__GPIO3_IO08, WEAK_PULLUP),
+#define GP_GPI_2 IMX_GPIO_NR(3, 9)
+ IOMUX_PAD_CTRL(EIM_DA9__GPIO3_IO09, WEAK_PULLUP),
+#define GP_GPI_3 IMX_GPIO_NR(3, 10)
+ IOMUX_PAD_CTRL(EIM_DA10__GPIO3_IO10, WEAK_PULLUP),
+#define GP_GPI_4 IMX_GPIO_NR(3, 11)
+ IOMUX_PAD_CTRL(EIM_DA11__GPIO3_IO11, WEAK_PULLUP),
+#define GP_GPI_5 IMX_GPIO_NR(3, 12)
+ IOMUX_PAD_CTRL(EIM_DA12__GPIO3_IO12, WEAK_PULLUP),
+#define GP_GPI_6 IMX_GPIO_NR(3, 13)
+ IOMUX_PAD_CTRL(EIM_DA13__GPIO3_IO13, WEAK_PULLUP),
+#define GP_GPI_7 IMX_GPIO_NR(3, 14)
+ IOMUX_PAD_CTRL(EIM_DA14__GPIO3_IO14, WEAK_PULLUP),
+#define GP_GPI_8 IMX_GPIO_NR(3, 15)
+ IOMUX_PAD_CTRL(EIM_DA15__GPIO3_IO15, WEAK_PULLUP),
+#define GP_GPI_9 IMX_GPIO_NR(4, 15)
+ IOMUX_PAD_CTRL(KEY_ROW4__GPIO4_IO15, WEAK_PULLUP),
+#define GP_GPI_10 IMX_GPIO_NR(4, 14)
+ IOMUX_PAD_CTRL(KEY_COL4__GPIO4_IO14, WEAK_PULLUP),
+#define GP_GPI_11 IMX_GPIO_NR(1, 4)
+ IOMUX_PAD_CTRL(GPIO_4__GPIO1_IO04, WEAK_PULLUP),
+#define GP_GPI_12 IMX_GPIO_NR(4, 7)
+ IOMUX_PAD_CTRL(KEY_ROW0__GPIO4_IO07, WEAK_PULLUP),
+#define GP_GPI_13 IMX_GPIO_NR(1, 7)
+ IOMUX_PAD_CTRL(GPIO_7__GPIO1_IO07, WEAK_PULLUP),
+#define GP_GPI_14 IMX_GPIO_NR(3, 29)
+ IOMUX_PAD_CTRL(EIM_D29__GPIO3_IO29, WEAK_PULLUP),
+#define GP_GPI_15 IMX_GPIO_NR(2, 25)
+ IOMUX_PAD_CTRL(EIM_OE__GPIO2_IO25, WEAK_PULLUP),
+#define GP_GPI_16 IMX_GPIO_NR(2, 26)
+ IOMUX_PAD_CTRL(EIM_RW__GPIO2_IO26, WEAK_PULLUP),
+#define GP_GPI_EN_N IMX_GPIO_NR(2, 31)
+ IOMUX_PAD_CTRL(EIM_EB3__GPIO2_IO31, WEAK_PULLUP),
+
+ /* GPIO test points */
+#define GP_TP71 IMX_GPIO_NR(1, 30)
+ IOMUX_PAD_CTRL(ENET_TXD0__GPIO1_IO30, WEAK_PULLUP),
+#define GP_TP72 IMX_GPIO_NR(4, 8)
+ IOMUX_PAD_CTRL(KEY_COL1__GPIO4_IO08, WEAK_PULLUP),
+#define GP_TP73 IMX_GPIO_NR(4, 9)
+ IOMUX_PAD_CTRL(KEY_ROW1__GPIO4_IO09, WEAK_PULLUP),
+#define GP_TP74 IMX_GPIO_NR(2, 7)
+ IOMUX_PAD_CTRL(NANDF_D7__GPIO2_IO07, WEAK_PULLUP),
+#define GP_TP84 IMX_GPIO_NR(1, 3)
+ IOMUX_PAD_CTRL(GPIO_3__GPIO1_IO03, WEAK_PULLUP),
+#define GP_TP88 IMX_GPIO_NR(4, 5)
+ IOMUX_PAD_CTRL(GPIO_19__GPIO4_IO05, WEAK_PULLUP),
+#define GP_TP89 IMX_GPIO_NR(7, 8)
+ IOMUX_PAD_CTRL(SD3_RST__GPIO7_IO08, WEAK_PULLUP),
+#define GP_TP95 IMX_GPIO_NR(2, 30)
+ IOMUX_PAD_CTRL(EIM_EB2__GPIO2_IO30, WEAK_PULLUP),
+#define GP_LVDS_CTRL IMX_GPIO_NR(2, 0)
+ IOMUX_PAD_CTRL(NANDF_D0__GPIO2_IO00, WEAK_PULLUP),
+
+
+ /* i2c1_rv4162 rtc */
+#define GPIRQ_RTC_RV4162 IMX_GPIO_NR(4, 6)
+ IOMUX_PAD_CTRL(KEY_COL0__GPIO4_IO06, WEAK_PULLUP),
+
+ /* i2c1_sgtl5000 */
+ IOMUX_PAD_CTRL(GPIO_0__CCM_CLKO1, OUTPUT_40OHM), /* SGTL5000 sys_mclk */
+
+#define GPIRQ_I2C3A_J6 IMX_GPIO_NR(7, 13)
+ IOMUX_PAD_CTRL(GPIO_18__GPIO7_IO13, BUTTON_PAD_CTRL),
+#define GP_I2C3A_J6_RESET IMX_GPIO_NR(1, 8)
+ IOMUX_PAD_CTRL(GPIO_8__GPIO1_IO08, WEAK_PULLUP),
+
+ /* i2c3a - J6 lvds connector (behind PCA9540B mux) */
+#define GPIRQ_LIGHT_SENSOR IMX_GPIO_NR(7, 6)
+ IOMUX_PAD_CTRL(SD3_DAT2__GPIO7_IO06, WEAK_PULLUP),
+
+ /* PCIe */
+#define GP_PCIE_RESET IMX_GPIO_NR(6, 31)
+ IOMUX_PAD_CTRL(EIM_BCLK__GPIO6_IO31, WEAK_PULLDN),
+#define GP_PCIE_DISABLE IMX_GPIO_NR(2, 28)
+ IOMUX_PAD_CTRL(EIM_EB0__GPIO2_IO28, WEAK_PULLDN),
+
+ /* PWM1 - J55, pin B30 */
+#define GP_J55_PWM1 IMX_GPIO_NR(1, 21)
+ IOMUX_PAD_CTRL(GPIO_9__GPIO1_IO09, WEAK_PULLDN),
+
+ /* PWM2 - Backlight on LVDS2 connector: J6, pin 30 */
+#define GP_BACKLIGHT_LVDS IMX_GPIO_NR(1, 1)
+ IOMUX_PAD_CTRL(GPIO_1__GPIO1_IO01, WEAK_PULLDN),
+
+ /* reg_usbotg_vbus */
+#define GP_REG_USBOTG IMX_GPIO_NR(3, 22)
+ IOMUX_PAD_CTRL(EIM_D22__GPIO3_IO22, WEAK_PULLDN),
+
+ /* reg_wlan_en */
+#define GP_REG_WLAN_EN IMX_GPIO_NR(2, 5)
+ IOMUX_PAD_CTRL(NANDF_D5__GPIO2_IO05, WEAK_PULLDN),
+
+ /* UART1 */
+ IOMUX_PAD_CTRL(SD3_DAT7__UART1_TX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD3_DAT6__UART1_RX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD3_DAT0__GPIO7_IO04, WEAK_PULLUP),
+#define GP_UART1_TX_EN IMX_GPIO_NR(7, 5)
+ IOMUX_PAD_CTRL(SD3_DAT1__GPIO7_IO05, WEAK_PULLDN_OUTPUT),
+
+ /* UART2 */
+ IOMUX_PAD_CTRL(EIM_D26__UART2_TX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(EIM_D27__UART2_RX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD3_CMD__UART2_CTS_B, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD3_CLK__UART2_RTS_B, UART_PAD_CTRL),
+
+ /* UART3 */
+ IOMUX_PAD_CTRL(EIM_D24__UART3_TX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(EIM_D25__UART3_RX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(EIM_D23__GPIO3_IO23, WEAK_PULLUP),
+#define GP_UART3_TX_EN IMX_GPIO_NR(3, 31)
+ IOMUX_PAD_CTRL(EIM_D31__GPIO3_IO31, WEAK_PULLDN_OUTPUT),
+
+ /* UART4 */
+ IOMUX_PAD_CTRL(CSI0_DAT12__UART4_TX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT13__UART4_RX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT17__GPIO6_IO03, WEAK_PULLUP),
+#define GP_UART4_TX_EN IMX_GPIO_NR(6, 2)
+ IOMUX_PAD_CTRL(CSI0_DAT16__GPIO6_IO02, WEAK_PULLDN_OUTPUT),
+
+ /* UART5 */
+ IOMUX_PAD_CTRL(CSI0_DAT14__UART5_TX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT15__UART5_RX_DATA, UART_PAD_CTRL),
+ IOMUX_PAD_CTRL(CSI0_DAT19__GPIO6_IO05, WEAK_PULLUP),
+#define GP_UART5_TX_EN IMX_GPIO_NR(6, 4)
+ IOMUX_PAD_CTRL(CSI0_DAT18__GPIO6_IO04, WEAK_PULLDN_OUTPUT),
+
+ /* USBH1 */
+ IOMUX_PAD_CTRL(EIM_D30__USB_H1_OC, WEAK_PULLUP),
+#define GP_USB_HUB_RESET IMX_GPIO_NR(7, 12)
+ IOMUX_PAD_CTRL(GPIO_17__GPIO7_IO12, WEAK_PULLDN),
+
+ /* USBOTG */
+ IOMUX_PAD_CTRL(ENET_RX_ER__USB_OTG_ID, WEAK_PULLUP),
+// IOMUX_PAD_CTRL(KEY_COL4__USB_OTG_OC, WEAK_PULLUP),
+ IOMUX_PAD_CTRL(EIM_WAIT__GPIO5_IO00, WEAK_PULLUP),
+
+ /* USDHC1 */
+ IOMUX_PAD_CTRL(SD1_CLK__SD1_CLK, USDHC1_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD1_CMD__SD1_CMD, USDHC1_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD1_DAT0__SD1_DATA0, USDHC1_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD1_DAT1__SD1_DATA1, USDHC1_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD1_DAT2__SD1_DATA2, USDHC1_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD1_DAT3__SD1_DATA3, USDHC1_PAD_CTRL),
+#define GP_USDHC1_CD IMX_GPIO_NR(7, 0)
+ IOMUX_PAD_CTRL(SD3_DAT5__GPIO7_IO00, WEAK_PULLUP),
+
+ /* USDHC2 - silex/TiWi wl1271 */
+ IOMUX_PAD_CTRL(SD2_CLK__SD2_CLK, USDHC2_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD2_CMD__SD2_CMD, USDHC2_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD2_DAT0__SD2_DATA0, USDHC2_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD2_DAT1__SD2_DATA1, USDHC2_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD2_DAT2__SD2_DATA2, USDHC2_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC2_PAD_CTRL),
+
+ /* USDHC4 - emmc */
+ IOMUX_PAD_CTRL(SD4_CLK__SD4_CLK, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_CMD__SD4_CMD, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT0__SD4_DATA0, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT1__SD4_DATA1, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT2__SD4_DATA2, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT3__SD4_DATA3, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT4__SD4_DATA4, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT5__SD4_DATA5, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT6__SD4_DATA6, USDHC4_PAD_CTRL),
+ IOMUX_PAD_CTRL(SD4_DAT7__SD4_DATA7, USDHC4_PAD_CTRL),
+#define GP_EMMC_RESET IMX_GPIO_NR(2, 6)
+ IOMUX_PAD_CTRL(NANDF_D6__GPIO2_IO06, WEAK_PULLUP),
+
+ /* silex/wl1271 */
+#define GPIRQ_WIFI IMX_GPIO_NR(6, 11)
+ IOMUX_PAD_CTRL(NANDF_CS0__GPIO6_IO11, WEAK_PULLDN),
+#define GP_WIFI_QOW IMX_GPIO_NR(2, 3)
+ IOMUX_PAD_CTRL(NANDF_D3__GPIO2_IO03, WEAK_PULLUP),
+#define GP_WIFI_CLK_REQ IMX_GPIO_NR(2, 3)
+ IOMUX_PAD_CTRL(NANDF_D4__GPIO2_IO04, WEAK_PULLUP),
+ /* TiWi only */
+#define GPIRQ_BT_HOST_WAKE IMX_GPIO_NR(6, 10)
+ IOMUX_PAD_CTRL(NANDF_RB0__GPIO6_IO10, WEAK_PULLDN),
+};
+
+static const struct i2c_pads_info i2c_pads[] = {
+ /* I2C1, SGTL5000, RV4162 rtc */
+ I2C_PADS_INFO_ENTRY(I2C1, EIM_D21, 3, 21, EIM_D28, 3, 28, I2C_PAD_CTRL),
+ /* I2C2, J55 connector to hp board */
+ I2C_PADS_INFO_ENTRY(I2C2, KEY_COL3, 4, 12, KEY_ROW3, 4, 13, I2C_PAD_CTRL),
+ /* I2C3, PCA9540B(mux), I2C3a, J6 LVDS, I2C3b, PCIe connector */
+ I2C_PADS_INFO_ENTRY(I2C3, GPIO_5, 1, 05, GPIO_16, 7, 11, I2C_PAD_CTRL),
+};
+#define I2C_BUS_CNT 3
+
+#ifdef CONFIG_USB_EHCI_MX6
+int board_ehci_hcd_init(int port)
+{
+ if (port) {
+ /* Reset USB hub */
+ gpio_direction_output(GP_USB_HUB_RESET, 0);
+ mdelay(2);
+ gpio_set_value(GP_USB_HUB_RESET, 1);
+ }
+ return 0;
+}
+
+int board_ehci_power(int port, int on)
+{
+ if (port)
+ return 0;
+ if (!on) {
+ gpio_set_value(GP_REG_USBOTG, on);
+ return 0;
+ }
+ if (otg_power_detect()) {
+ gpio_set_value(GP_REG_USBOTG, 0);
+ mdelay(100);
+ if (otg_power_detect())
+ return 0;
+ }
+ gpio_set_value(GP_REG_USBOTG, on);
+ return 0;
+}
+
+#endif
+
+#ifdef CONFIG_SYS_BOOT_BOARD_POWER_CHECK
+void board_power_check()
+{
+ int i = 0;
+
+ while (1) {
+ if (!otg_power_detect())
+ break;
+ if (!i) {
+ gpio_set_value(GP_REG_USBOTG, 0);
+ } else {
+ printf("Please disconnect otg cable\n");
+
+ }
+ i++;
+ mdelay(1000);
+ }
+}
+#endif
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg board_usdhc_cfg[] = {
+ {.esdhc_base = USDHC1_BASE_ADDR, .bus_width = 4,
+ .gp_cd = GP_USDHC1_CD},
+ {.esdhc_base = USDHC4_BASE_ADDR, .bus_width = 8,
+ .gp_reset = GP_EMMC_RESET},
+};
+#endif
+
+#ifdef CONFIG_MXC_SPI
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return (bus == 0 && cs == 0) ? GP_ECSPI1_NOR_CS : -1;
+}
+#endif
+
+#ifdef CONFIG_CMD_FBPANEL
+void board_enable_lvds(const struct display_info_t *di, int enable)
+{
+ gpio_direction_output(GP_BACKLIGHT_LVDS, enable);
+}
+
+static const struct display_info_t displays[] = {
+ VD_AFK1024600A02(LVDS, fbp_detect_i2c, (GP_I2C3A_J6_RESET << 8) | 2, 0x4a),
+
+ /* ft5x06 */
+ VD_HANNSTAR7(LVDS, fbp_detect_i2c, 2, 0x38),
+ VD_AUO_B101EW05(LVDS, NULL, 2, 0x38),
+ VD_LG1280_800(LVDS, NULL, 2, 0x38),
+ VD_DT070BTFT(LVDS, NULL, 2, 0x38),
+ VD_WSVGA(LVDS, NULL, 2, 0x38),
+ VD_TM070JDHG30(LVDS, NULL, 2, 0x38),
+
+ /* ili210x */
+ VD_AMP1024_600(LVDS, fbp_detect_i2c, 2, 0x41),
+
+ /* egalax_ts */
+ VD_HANNSTAR(LVDS, fbp_detect_i2c, 2, 0x04),
+ VD_LG9_7(LVDS, NULL, 2, 0x04),
+
+ VD_SHARP_LQ101K1LY04(LVDS, NULL, 0, 0x00),
+ VD_WXGA(LVDS, NULL, 0, 0x00),
+ VD_LD070WSVGA(LVDS, NULL, 0, 0x00),
+ VD_WVGA(LVDS, NULL, 0, 0x00),
+ VD_AA065VE11(LVDS, NULL, 0, 0x00),
+ VD_VGA(LVDS, NULL, 0, 0x00),
+};
+#define display_cnt ARRAY_SIZE(displays)
+#else
+#define displays NULL
+#define display_cnt 0
+#endif
+
+static const unsigned short gpios_out_low[] = {
+ GP_BT_RFKILL_RESET, /* disable bluetooth */
+ GP_SPI_UART_RESET,
+ GP_RGMII_PHY_RESET,
+ GP_GPO_1,
+ GP_GPO_2,
+ GP_GPO_3,
+ GP_GPO_4,
+ GP_GPO_5,
+ GP_GPO_6,
+ GP_GPO_7,
+ GP_GPO_8,
+ GP_I2C3A_J6_RESET,
+ GP_PCIE_RESET,
+ GP_J55_PWM1,
+ GP_BACKLIGHT_LVDS,
+ GP_REG_USBOTG, /* disable USB otg power */
+ GP_REG_WLAN_EN, /* disable wireless */
+ GP_USB_HUB_RESET, /* disable hub */
+ GP_EMMC_RESET, /* hold in reset */
+ GP_UART1_TX_EN,
+ GP_UART3_TX_EN,
+ GP_UART4_TX_EN,
+ GP_UART5_TX_EN,
+};
+
+static const unsigned short gpios_out_high[] = {
+ GP_ECSPI1_NOR_CS, /* SS1 of spi nor */
+ GP_ECSPI2_SS0,
+ GP_ECSPI2_SS1,
+ GP_ECSPI3_UART,
+ GP_FLEXCAN_STANDBY,
+};
+
+static const unsigned short gpios_in[] = {
+ GPIRQ_SPI_UART,
+ GPIRQ_ENET_PHY,
+ GP_GPI_1,
+ GP_GPI_2,
+ GP_GPI_3,
+ GP_GPI_4,
+ GP_GPI_5,
+ GP_GPI_6,
+ GP_GPI_7,
+ GP_GPI_8,
+ GP_GPI_9,
+ GP_GPI_10,
+ GP_GPI_11,
+ GP_GPI_12,
+ GP_GPI_13,
+ GP_GPI_14,
+ GP_GPI_15,
+ GP_GPI_16,
+ GP_GPI_EN_N,
+ GP_TP71,
+ GP_TP72,
+ GP_TP73,
+ GP_TP74,
+ GP_TP84,
+ GP_TP88,
+ GP_TP89,
+ GP_TP95,
+ GPIRQ_RTC_RV4162,
+ GPIRQ_I2C3A_J6,
+ GP_LVDS_CTRL,
+ GPIRQ_LIGHT_SENSOR,
+ GP_PCIE_DISABLE,
+ GP_USDHC1_CD,
+ GPIRQ_WIFI,
+ GP_WIFI_QOW,
+ GP_WIFI_CLK_REQ,
+ GPIRQ_BT_HOST_WAKE
+};
+
+int board_early_init_f(void)
+{
+ set_gpios_in(gpios_in, ARRAY_SIZE(gpios_in));
+ set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1);
+ set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0);
+ SETUP_IOMUX_PADS(init_pads);
+ return 0;
+}
+
+int board_init(void)
+{
+ common_board_init(i2c_pads, I2C_BUS_CNT, IOMUXC_GPR1_OTG_ID_ENET_RX_ERR,
+ displays, display_cnt, 0);
+ return 0;
+}
+
+const struct button_key board_buttons[] = {
+ {"tp71", GP_TP71, 'T', 1},
+ {NULL, 0, 0, 0},
+};
+
+#ifdef CONFIG_CMD_BMODE
+const struct boot_mode board_boot_modes[] = {
+ /* 4 bit bus width */
+ {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
+ {"mmc1", MAKE_CFGVAL(0x60, 0x58, 0x00, 0x00)}, /* 8-bit eMMC */
+ {NULL, 0},
+};
+#endif
diff --git a/board/boundary/hp/hp.cfg b/board/boundary/hp/hp.cfg
new file mode 100644
index 00000000000..7fb401f9b87
--- /dev/null
+++ b/board/boundary/hp/hp.cfg
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* 6 board sample */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL 0x42340235
+#define MX6_MMDC_P0_MPDGCTRL1_VAL 0x02210221
+#define MX6_MMDC_P1_MPDGCTRL0_VAL 0x4216021d
+#define MX6_MMDC_P1_MPDGCTRL1_VAL 0x0208020d
+#define MX6_MMDC_P0_MPRDDLCTL_VAL 0x4146494d
+#define MX6_MMDC_P1_MPRDDLCTL_VAL 0x47494b44
+#define MX6_MMDC_P0_MPWRDLCTL_VAL 0x37332c2a
+#define MX6_MMDC_P1_MPWRDLCTL_VAL 0x3131312d
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL 0x0040004c
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL 0x0038003e
+#define MX6_MMDC_P1_MPWLDECTRL0_VAL 0x00210024
+#define MX6_MMDC_P1_MPWLDECTRL1_VAL 0x00230035
+#define WALAT 1
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 64
+/* H5TC2G63FFR-PBA */
+#include "../common/mx6/1066mhz_128mx16.cfg"
+#include "../common/mx6/clocks.cfg"
diff --git a/board/boundary/hp/hp_q1g.cfg b/board/boundary/hp/hp_q1g.cfg
new file mode 100644
index 00000000000..6178df2f339
--- /dev/null
+++ b/board/boundary/hp/hp_q1g.cfg
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* 10 board sample */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL 0x430e0320
+#define MX6_MMDC_P0_MPDGCTRL1_VAL 0x030a0302
+#define MX6_MMDC_P1_MPDGCTRL0_VAL 0x43140326
+#define MX6_MMDC_P1_MPDGCTRL1_VAL 0x030e0254
+#define MX6_MMDC_P0_MPRDDLCTL_VAL 0x42353947
+#define MX6_MMDC_P1_MPRDDLCTL_VAL 0x3d373446
+#define MX6_MMDC_P0_MPWRDLCTL_VAL 0x383c4134
+#define MX6_MMDC_P1_MPWRDLCTL_VAL 0x4235463f
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL 0x000c0014
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL 0x00170011
+#define MX6_MMDC_P1_MPWLDECTRL0_VAL 0x0009001a
+#define MX6_MMDC_P1_MPWLDECTRL1_VAL 0x00040011
+#define WALAT 0
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 64
+/* H5TC2G63FFR-PBA */
+#include "../common/mx6/1066mhz_128mx16.cfg"
+#include "../common/mx6/clocks.cfg"
diff --git a/board/boundary/hp/hp_s512m.cfg b/board/boundary/hp/hp_s512m.cfg
new file mode 100644
index 00000000000..9eac273520e
--- /dev/null
+++ b/board/boundary/hp/hp_s512m.cfg
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2013 Boundary Devices
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * Refer doc/README.imximage for more details about how-to configure
+ * and create imximage boot image
+ *
+ * The syntax is taken as close as possible with the kwbimage
+ */
+
+/* image version */
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi, sd (the board has no nand neither onenand)
+ */
+BOOT_FROM spi
+
+#define __ASSEMBLY__
+#include <config.h>
+#include "asm/arch/mx6-ddr.h"
+#include "asm/arch/iomux.h"
+#include "asm/arch/crm_regs.h"
+
+/* 5 board sample */
+#define MX6_MMDC_P0_MPDGCTRL0_VAL 0x42340234
+#define MX6_MMDC_P0_MPDGCTRL1_VAL 0x02230222
+#define MX6_MMDC_P0_MPRDDLCTL_VAL 0x4344484e
+#define MX6_MMDC_P0_MPWRDLCTL_VAL 0x37352a2b
+#define MX6_MMDC_P0_MPWLDECTRL0_VAL 0x003b0043
+#define MX6_MMDC_P0_MPWLDECTRL1_VAL 0x00330039
+#define WALAT 1
+
+#include "../common/mx6/ddr-setup.cfg"
+#define RANK 0
+#define BUS_WIDTH 32
+/* H5TC2G63FFR-PBA */
+#include "../common/mx6/800mhz_128mx16.cfg"
+#include "../common/mx6/clocks.cfg"
diff --git a/configs/hp_defconfig b/configs/hp_defconfig
new file mode 100644
index 00000000000..342af9f0683
--- /dev/null
+++ b/configs/hp_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_HP=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/hp/hp.cfg,MX6DL,DDR_MB=1024,DEFCONFIG=\"hp\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
diff --git a/configs/hp_q1g_defconfig b/configs/hp_q1g_defconfig
new file mode 100644
index 00000000000..852d252ab0f
--- /dev/null
+++ b/configs/hp_q1g_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_HP=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/hp/hp_q1g.cfg,MX6Q,DDR_MB=1024,DEFCONFIG=\"hp_q1g\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
diff --git a/configs/hp_s512m_defconfig b/configs/hp_s512m_defconfig
new file mode 100644
index 00000000000..d13e40822e4
--- /dev/null
+++ b/configs/hp_s512m_defconfig
@@ -0,0 +1,71 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x17800000
+CONFIG_TARGET_HP=y
+CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/hp/hp_s512m.cfg,MX6S,DDR_MB=512,DEFCONFIG=\"hp_s512m\""
+CONFIG_BOOTDELAY=3
+CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
+CONFIG_SUPPORT_RAW_INITRD=y
+CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
+CONFIG_PARTITION_TYPE_GUID=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x12000000
+CONFIG_FASTBOOT_BUF_SIZE=0x26000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=1
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_ATHEROS=y
+CONFIG_NETDEVICES=y
+CONFIG_FEC_MXC=y
+CONFIG_SPI=y
+CONFIG_MXC_SPI=y
+CONFIG_USB=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Boundary"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_USB_ETHER=y
+CONFIG_USB_ETH_CDC=y
+CONFIG_USB_HOST_ETHER=y
+CONFIG_USB_ETHER_ASIX=y
+CONFIG_USB_ETHER_MCS7830=y
+CONFIG_USB_ETHER_SMSC95XX=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_SW_CURSOR is not set
+CONFIG_OF_LIBFDT=y
diff --git a/include/configs/hp.h b/include/configs/hp.h
new file mode 100644
index 00000000000..55c9867db42
--- /dev/null
+++ b/include/configs/hp.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016 Boundary Devices, Inc.
+ *
+ * Configuration settings for the Boundary Devices hp
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "mx6_common.h"
+
+#define CONFIG_MACH_TYPE 3978
+
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+#define CONFIG_SYS_BOOT_BOARD_POWER_CHECK
+
+#define BD_I2C_MASK 7
+
+#include "boundary.h"
+#define CONFIG_EXTRA_ENV_SETTINGS BD_BOUNDARY_ENV_SETTINGS \
+
+#endif /* __CONFIG_H */
--
GitLab