From 7f7409ba6ab937b73f16bac8d83e215db86ace3d Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede@redhat.com> Date: Thu, 18 Jun 2015 18:19:22 +0200 Subject: [PATCH] sunxi: Enable both ehci and otg in host mode on various boards Now that the device-model port of the musb mode makes it possible, enable both the ehci and otg in host mode on boards where the musb is wired up in host only mode, either via an usb-a receptacle or via an usb <-> sata converter. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Ian Campbell <ijc@hellion.org.uk> --- configs/CSQ_CS908_defconfig | 1 + configs/Mele_A1000G_quad_defconfig | 1 + configs/Mini-X_defconfig | 2 ++ configs/ba10_tv_box_defconfig | 2 ++ 4 files changed, 6 insertions(+) diff --git a/configs/CSQ_CS908_defconfig b/configs/CSQ_CS908_defconfig index b92b6a3df08..fe88a7b29f6 100644 --- a/configs/CSQ_CS908_defconfig +++ b/configs/CSQ_CS908_defconfig @@ -15,3 +15,4 @@ CONFIG_ETH_DESIGNWARE=y CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Mele_A1000G_quad_defconfig b/configs/Mele_A1000G_quad_defconfig index f32a9675d49..ffc8d9b7bd2 100644 --- a/configs/Mele_A1000G_quad_defconfig +++ b/configs/Mele_A1000G_quad_defconfig @@ -17,3 +17,4 @@ CONFIG_AXP221_DLDO1_VOLT=3300 CONFIG_AXP221_DLDO4_VOLT=3300 CONFIG_AXP221_ALDO1_VOLT=3300 CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y diff --git a/configs/Mini-X_defconfig b/configs/Mini-X_defconfig index d7d74a9f08f..c721c877422 100644 --- a/configs/Mini-X_defconfig +++ b/configs/Mini-X_defconfig @@ -9,3 +9,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" diff --git a/configs/ba10_tv_box_defconfig b/configs/ba10_tv_box_defconfig index d944ae993ef..ae302c544e4 100644 --- a/configs/ba10_tv_box_defconfig +++ b/configs/ba10_tv_box_defconfig @@ -12,3 +12,5 @@ CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_EMAC" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_SUNXI=y +CONFIG_USB0_VBUS_PIN="PB9" -- GitLab